| Content | Audient Nero
Monitor Controller
4 sources selectable:
- 2 x Stereo Line Level Inputs (6.3 mm jack)
- 1 x Stereo Cue Mix Inputs (6.3 mm jack)
- Alt Inputs (3.5 mm mini jack, stereo RCA optical or coaxial S/PDIF inputs)
3 x Stereo Monitor Outputs
Switchable subwoofer output
4x headphone output; built-in talkback microphone
XLR input for external talkback microphone
Dim, cut, mono & polarity function
LED level meter
Dimensions: 320 x 180 x 100 mm
Weight: 2.2 kg | MC7.1 - Surround Monitor Controller
MULTIPLE SOURCE STUDIO MONITOR CONTROLLER FOR 7.1/5.1 SURROUND & STEREO APPLICATIONS.
The Drawmer MC7.1 Surround Monitor Controller is a combined 7.1/5.1 and stereo monitor controller. Designed to provide all the mix checking features required for surround recordings without compromising on those used in stereo monitoring. It has the same pristine & transparent design as others from the Drawmer monitor controller pedigree, with a rugged desk top "wedge" form factor as used in the popular MC3.1.
Whether it is producing audio for film or television, or transporting the listener directly into the venue of an all encompassing orchestral piece, be it in 5.1, 7.1, quadraphonic, DTS®, Dolby Digital EX,THX Surround EX™, DTS-HD™, Dolby Atmos®, etc., one thing is sure, the number of users that wish to listen to audio within a surround setting has been growing and will continue to do so. There has been an ever increasing number of surround products coming to market, not only blue ray players and home cinema but also on mobile and media devices. For example, Apple devices have been capable of reproducing 7.1 surround since iOS 9.3. Therefore, it is likely that at some point every artist and engineer will consider trying surround sound, or fear being left behind.
Boasting two sets of balanced 7.1 Inputs, a 7.1 through, 1 Balanced Stereo Input and a convenient front panel Aux Input, with Balanced 7.1 Speaker outs and an independent Stereo main out with its own sub woofer option, there are no shortage of connectivity options. The Drawmer MC7.1 is capable of supporting any speaker seup, from mono, to stereo, various modes of surround, or 8 independent channels, depending on input type and speaker positioning.
The MC7.1 is a powerful Surround Monitor Controller in its own right, but is also perfect for controlling and checking your stereo mixes. This is one area where other surround monitoring controllers fall short. All studios, whether dedicated to film audio post production, or small home studio will at at some time (if not most of the time) work in stereo as well as surround. Aside from the surround capabilities, the MC7.1 contains the same comprehensive set of stereo "mix check" functions that are presented on the MC3.1 and which can of course be applied to the stereo input channel or any of the surround channels when these are routed to stereo.
The ability to "mix down" the surround mix to the FL and FR speakers OR the independent Stereo main speakers combined with the comprehensive cut or solo matrix means any combination of the surround channels can be listened to in the front mains. Want to focus in on the rear channels? Simply mix down to the front stereo speakers then solo them out of the mix! Whilst soloing out the centre or LFE channels give a central mono representation across the fronts or stereo mains!
Speaker level matching with switchable Mono/Sub output, the popular Low/Mid/High band solo feature, Internal Talkback Mic with footswitch control, and External Talkback Mic input are all brought over from the MC3.1, completing the rich array of features available on the MC7.1.
- Pristine, ultra low noise & transparent circuit design gives you an accurate representation of your mix whether it be surround or stereo.
- There are a total of 20 input sources. These include two separate 7.1 inputs (one via balanced jacks and one via 25 pin D-sub) with a through output to send to a multitrack recorder, for example. A Stereo input via Neutrik combijacks, and a Top panel 3.5mm AUX Input & Level Control for connecting MP3 players, smartphones or tablets etc.
- 3x Sets of Speaker Outputs. One 7.1 (or 8 Speakers in any configuration), one Stereo Left/Right pair, and one Mono/Sub. Each can be switched individually & simultaneously or give A/B comparisons. All eleven outputs have level trims to provide precise channel matching and ease of calibration.
- Each of the eight 7.1 speakers can be cut or soloed individually.
- 7.1 channels can be mixed down to 5.1, Stereo and Mono, though any configuration of up to 8 monitors should be possible depending on the source and the speaker layout.
- Stereo outputs (including those mixed down from surround) can be monitored via the main stereo speaker outputs or the FL and FR from the surround speakers.
- When in stereo operation comprehensive Mix Checking facilities Including Low, Mid, High Solo; Dim; L/R Mute; Phase Reverse and more, help check every aspect of your Mix & Provide Ultimate Control.
- Volume can be set via the Variable Front Panel Knob or a Preset Control. Each has excellent channel matching and smooth feel.
- 2x Headphone Amplifiers with Individual Level Control.
- Built In Talkback with Level Control, Internal or External Microphone, Switching via Desktop or Footswitch, & Internal Routing to Headphones and also a Mono Output Jack.
- The MC7.1 is all analogue so won’t need to be rebooted due to software crashes, and doesn’t require firmware updates.
- Desktop 'wedge' form factor with a rugged steel chassis and a Kensington security slot for added protection.
|
- Latency-free analogue signal path
- Customisable
- Level indicator L/R with +4, +10 and +18 dBu calibration options
- Correlation meter for verifying mono-compatibility
- Two headphone outputs with volume controllers and main cue selector switches
- Three analogue inputs, one S/PDIF input
- Three loudspeaker outputs with volume controllers for level calibration
- Mono summed output for subwoofer or mono monitor
- Main and cue direct outputs
Switching between different signal sources and monitors is one of the most common tasks in any studio. Ergonomic console design and two clearly structured control levels makes the Palmer MONICON XL the perfect, intuitive nerve centre for all your requirements. Selecting audio sources and loudspeakers is convenient and at the touch of a button.
The Palmer studio monitor controller features three analog stereo inputs, one S/PDIF input and outputs for three monitor pairs, each with its own volume controller for level calibration. A further mono summed full-range output is also available for connecting either a mono monitor or a subwoofer. An exclusive highlight of the MONICON XL is its correlation meter, which displays the phase difference between a stereo signal\'s left and right channels. This facilitates the quick and simple discovery of mono-compatibility errors in mixes. The controller is also customisable to your personal work style.
Its fully analogue audio circuit means that the MONICON XL demonstrates absolutely no latency or signal distortion. Additional features that are a must for any studio make the device far more than simply a monitor controller. Two headphone outputs with volume controllers and main cue selector switches, a cue master controller and an on/off talkback microphone with volume control are all also included. As are a mute button and a dim button, with volume control, that instantly reduces the monitor level by a pre-set amount.
Product type
Other Studio and Recording Equipment
Channels
3 x switchable balanced outputs, 1 x CUE output, 1 x main output
Inputs
3 + SPDIF
Input connectors
3.5 mm TRS , 6.3 mm jack , RCA , SPDIF
Input type
balanced/unbalanced (depending on TS/TRS connection)
Max. input level
20 dBu
Input impedance
(balanced) 10.000 Ohm(s) , (unbalanced) 5.000 Ohm(s)
Outputs
7 x stereo
Output connectors
TRS balanced (1 - 3) , TRS unbalanced (CUE, MAIN, headphones 1 & 2)
Output impedance
600 Ohm(s)
Frequency response
12 - 90000 Hz
Total Harmonic Distortion (THD)
0.002 % (BW 20 - 20,000 Hz)
Signal-to-noise ratio (SNR)
102 dB (a-weighted) @ + 4 dBu
Dynamic range (DR AES17)
115 dB
CMRR
> 55 dB
Max. attenuation
(Attenuator + Mute) 111 dB , (Attenuator) 86 dB
Controls
attenuation , Audio DIM , input selector , mono , mute , output selector , PFL source , Talkback
Housing material
sheet steel , wood
Cabinet surface
Powder coated
Width
254 mm
Height
84 mm
Depth
215 mm
Weight
1,512 kg | Master your domain with the Behringer Xenyx CONTROL2USB studio monitor controller. Whether recording, mixing, or mastering, the CONTROL2USB places you firmly in command with master volume, talkback, source selection, and monitor control. Easily toggle between up to three sets of studio monitors and four stereo input sources. There's even a monitor mix input for your DAW! Keep the lines of communication open between you and the artist with the built-in talkback function. Mono, mute, and dim functions are right at your fingertips. The CONTROL2USB employs VCA technology, ensuring precise level adjustments. The infinitely useful Behringer Xenyx CONTROL2USB studio monitor controller also functions as a USB audio interface.
Behringer Xenyx CONTROL2USB Studio Monitor Controller at a Glance:
- Ample I/O provides monitor options galore
- VCA technology ensures precise level adjustments
- Convenient built-in USB audio interface
Ample I/O provides monitor options galore
Your mix isn't complete unless it sounds great in the studio, car, and on bass-challenged speakers and earphones. The Behringer Xenyx CONTROL2USB toggles between up to three sets of studio monitors, equipping your studio with monitor options galore. Utilize high-quality nearfields to get your mix started. Add or remove a subwoofer to check your low end. Then reference your mix with cube-style speakers. There's also a monitor mix input for your DAW. A pair of individually adjustable headphone outputs provides even more monitoring flexibility. The CONTROL2USB accommodates up to four stereo input sources, so setting up reference sources is a piece of cake.
VCA technology ensures precise level adjustments
Because it employs high-end Voltage Controlled Amplifier (VCA) technology instead of inexpensive resistive faders, the Behringer Xenyx CONTROL2USB is incredibly precise. The engineers at Sweetwater have found that you can set levels quickly and accurately with the CONTROL2USB's large control knob. Make minute adjustments with ease. The CONTROL2USB actually controls the voltage that drives the amplifier rather than simply controlling how much signal passes to it. The result is faithful sound reproduction that you can trust.
Convenient built-in USB audio interface
The Behringer Xenyx CONTROL2USB's built-in USB audio interface creates an excellent centerpiece for your studio without requiring additional hardware or drivers. Just plug into one of your computer's spare USB ports and get to work.
- Volume controller, source selector, monitor switcher and talkback in one device
- Large, illuminated volume knob
- Integrated USB audio interface
- 4 stereo inputs with independent level
- Additional monitor mix input for DAW
- 3 independent and adjustable stereo monitor outputs
- Mono, mute and dim function
- Built-in talkback microphone
- With phono preamp for record players
- 2 Separately adjustable headphone outputs
- 12-Segment LED display with input / output switch
- "Planet Earth" power supply, 100 - 240 V
- Depth (mm): 198
- Height (mm): 87
- Width (mm): 389
- Product Dimensions (mm): 87x389x198
- Net weight (kg): 2.4
- Colour: Black
- Packing: Retail Box
- Weight (kg): 2.4
|
Bluetooth In.
Balanced Audio Out.
Turn any professional speaker into a Bluetooth speaker!
Convenience
Ditch the adapters.
Kali Audio’s MV-BT lets you use your Bluetooth devices with professional speakers, mixers, controllers, and interfaces. Just pair your device by pressing the Kali logo on the front, and use your preferred balanced connector to connect to your system.
Pairing Button
Press the Kali logo to pair.
LED Display
Blue light indicates volume level.
Weighted Knob
Enjoy precise control over the volume level at your fingertips. Volume control is independent, so you can leave volume on your device at full.
Balanced Outputs
Connect to speakers, mixers, controllers, or interfaces with whatever cables you already use.
Specifications
| |
|---|
| Channels: |
2 |
| Inputs: |
Bluetooth, 3.5mm (AUX) |
| Outputs: |
2 x XLR, 2 x TRS |
| Height: (Shipping) |
80mm (84mm) |
| Length: (Shipping) |
134mm (138mm) |
| Width: (Shipping) |
130mm (154mm) |
| Weight: (Shipping) |
.5kg (.6kg) |
| In the Box: |
MV-BT, Local Power Wall Wart |
| Palmer Monicon, and the volume is right!
With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.
The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
- Type: passive
- Number of channels: 2
- Number of inputs: 2
- Input connections: XLR Combo / 3.5mm stereo jack
- Input type: balanced/unbalanced
- Maximum input level: +20 dBu
- Input impedance: 10 kohms balanced/ 5 kohms unbalanced
- Number of outputs: 2
- Output connections: XLR/m, 3.5 mm stereo jack
- Output type: balanced/unbalanced
- Max output level: +20 dBu
- Output impedance: 600 ohms
- Frequency response: 10Hz - 40 kHz +/- 1 dB
- THD: 0,001 %
- Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
- Controls: Attenuation, Mute, Mono
- Housing material: sheet steel/wood
- Housing surface: powder-coated
- Width: 164 mm
- Height: 62 mm
- Depth: 85 mm
|
Reviews
There are no reviews yet.