| Content |
HK Audio IL-82 Installation Line
Compact cabinet for public address and full-range applications offering exceptional speech intelligibility for background and near-field sound reinforcement in foyers, lecture halls, bars, clubs and the like. The IL 82 may be deployed either as a full-range cabinet or as a mid/ high cabinet in a configuration with a subwoofer like the compact HK Audio IL 112 Sub or IL 115 Sub. Built-in passive crossover.
|
|
| Accessories |
| 100 V Transformer with 3 power taps: 50 W, 25 W, 12.5 W Wall-mount bracket Ringbolt M8
| | | | Details |
| The IL 82 is a very compact 2-way full range loudspeaker enclosure with a built-in passive crossover. It is fitted with a direct loaded 8“-conical loudspeaker in a bass reflex housing and a ceramic high frequency driver with horn. This equipment makes a frequency response in the bass range possible which is sufficient for the transmission of speech and the representation of background music even without an additional subwoofer. HK Audio subwoofers IL 112 Sub and IL 115 Sub are available for applications requiring an extended frequency response in the bass range. Apart from tonal neutrality, the IL 82 stands out mainly due to its high speech transfer ability and a wide dynamic range. It is ideally suited for close-range acoustic applications for which distances of up to approx. 10 m have to be bridged, depending on the sound pressure requirements. Its small dimensions allow it to blend into the surroundings almost unnoticed. A controller is not required for operating the IL 82. It is possible to use the Digital Field Controller (DFC).
| | | | Power handling capacity |
| | RMS: |
| 100 W | | Program: |
| 200 W | | Peak (10 ms): |
| 300 W | | | | | Dimensions
(wide x tall x deep) |
| 9-1/4" x 13-3/4" x 9“
23,5 cm x 35 cm x 23 cm
| | | | Weight |
| 11 lbs
5,5 kg | | | | Service articles |
| 8“-speaker E994089 Ceramic high frequency driver E994088 |
|
- 37 Hz to 18 kHz frequency range
(-10 dB) - 150W pink noise, 300 watts continuous program power capacity
- 110 x 85 degree coverage with rotatable horn
- 115W, 55W, 28W at 70V/100V (plus 14W taps at 70V only)
- 8 Ohm Bypass
- Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
- Available in black or white (Control 29AV-WH)
- Dimensions (HxWxD): 518 mm x 305 mm x 280 mm (20.3 in x 12.0 in x 11.0 in)
- Net Weight: 12.2 kg (26.8 lb)
|
The P4228 is a weatherproof full range, wide-dispersion, two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high frequency section is a constant directivity CMD horn loaded with a 1.4” RCF Precision Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a double 8” woofer with a 2.5” voice coil. The cabinet is asingle piece rotational moulded in medium density polyethylene, full UV protected. The cabinet is equipped with 4 x M8 brass inserts, a stainless steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P 4228 is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).
| Features |
|---|
| Weatherproof cabinet IP 55 | | Aluminium grill and stainless steel bracket | | Two 8" high-output LF transducer with 2.5" voice coil | | Once RCF Precision Neodymium 1.4" Compression Driver with 2.5" voice coil | | 110° x 60° constant directivity horn | | Built in passive crossover | | 2° x 15° enclosure sides for array configurations | | Active Mosfet Compression Driver Protection | |
LICC (Low Impedance Compensated Crossover) network
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 80 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 100 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 129 dB | | | Horizontal coverage angle: | 110° | | | Vertical coverage angle: | 60° | | | Directivity index; Q: | 9 | | | System Sensitivity: | 97 dB | | | Nominal Impedance: | 8 Ω | | | Power Handling: | 400 Watt | | | Peak Power Handling: | 1600 Watt | | | Recommended Amplifier: | 800 | | | Protections: | Dinamyc | | | Crossover frequencies: | 1100 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 1.4“(35.5mm) throat, 2.5" (63.7 mm) coil diaphragm assembly | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 90 Watt AES | | | Sensitivity: | 110 dB | | | Woofer: | 2x8" (200 mm) woofer with 2.5" (64 mm) coil | | | Nominal Impedence: | 16 Ω | | | Input Power Rating: | 300 Watts AES | | | Sensitivity: | 95 dB | |
| INPUT SECTION |
|---|
| Input connector: | 4 pole Amphenol | |
| CABINET |
|---|
| Cabinet Material: | 8 mm Polyethylene rotomoulded | | | Hardware: | 4 x M8 + U-bracket and pair of spacers | | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | | Colour: | Gray | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 268 / 10.55 mm/inch | | | Width: | 566 / 22.28 mm/inch | | | Depth: | 250 / 9.84 mm/inch | | | Net Weight: | 13.5 / 29.7 Kg/Lbs |
|
|
The D 8 is a light-weight, robust 8“/1”, 2-way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.
The cabinet is manufactured from ABS and therefore is extremely resistant against abuse on the road. For low and mid frequencies a DYNACORD DND8200-8 neodymium transducer is used. The Electro-Voice DH3 driver is used for the projection of the high frequencies. The Constant-Directivity HF horn has been integrated into the baffle by CAD methods. The nominal coverage angle of the cabinet is 90°*90°, horizontal*vertical, respectively.
Power handling of the cabinet is 250 W (rated) and 1000W (peak). The maximum sound pressure level is 124 dB, the frequency range of the D 8 is from 65Hz to 20kHz. The D 8 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in high-performance small-format active and passive satellite systems.
Every transducer is protected against short-term thermal overload with thermal cutout switches and halogen protectors. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. The protection exhibits ʽsoftʼ switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
Extremely durable acoustic foam mounted to a strong powder-coated steel grille protects the loudspeaker components against any mechanical damage. The trapezoidally shaped enclosure also allows employing the cabinet in monitoring applications. A stable, integrated carrying handle and the integrated stand socket for pole-mount stands allow easy transportation and set-up. A protective cover is available as an optional accessory.
|
The latest addition to TOA's acclaimed speaker line, the new F-2000 and F-1000 Series of compact,
high efficiency two-way speakers achieve higher performance levels for wide range frequency response and power handling.
Designed to be extremely versatile in order to meet different installation and application requirements, the new F-2000 and F-1000 Series are ideal solutions that solve increasing
needs for adaptable sound reinforcement.
• Finish in Black or White
• Weather proof version available (F-2000BTWP)
• Low impedance and 100V versions (F-2000BT)
• External rotary control for various impedance settings
• Multi position Bracket included
• Built in speaker protection
Various mounting brackets
enables a wide variety of installations, for example on walls, ceilings and speaker stands. Moreover, additional available brackets make even more demanding installations possible.
| Specification | Model F-2000B |
|---|
| Enclosure Type | Bass-reflex type | | Power Handling Capacity | 60W(continous pink noise)180W (continous program) | | Impedance | 8Ohm | | Sensitivity | 92dB (1w,1m) | | Frequency Responce | 65-20,000Hz | | Crossover Frequency | 2.5kHz | | Directivity Angle | Horizontal 110°, vertical 100°, Horizontal 80°, vertical 80°(with horn adaptor) | | Speaker Componenrs | Low frequency 20 cm cone type. High Frequency, 25mm dome tweeter | | Input Terminals | Push-in terminal | | Finish | HIPS, black | | Dimensions | 224(W) × 373(H) × 235(D)mm | | Weight | 6.5 kg (14.33 lb) (including the supplied brackets) | | Accessories | Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set | | Option | Board hanger bracket:HY-CM20B,Cluster braket:HY-CL20B,Speaker stand:ST-16A |
|
Key Features:
- Compact enclosure
- 205 mm (8 in) LF transducer
- 90° x 50° Progressive Transition™ Field
Rotatable Waveguide with a 25 mm
(1 in) exit compression driver
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 52 Hz - 20 kHz
Frequency Response (+/-3 dB): 63 Hz - 19 kHz
Horizontal Coverage: 90°
Vertical Coverage: 50°
Directivity Factor (Q): 8 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 9 dB (avg. 500 Hz - 16 kHz)
System Sensitivity1: 93 SPL dB/1W/1m
Rated Maximum SPL (1m)2: 117 dB
System Nominal Impedance: 8 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 250 W / 500 W / 1000 W
AES Standard Power Rating4: 375 W
Crossover: 2.1 kHz
Transducers:
Low Frequency Driver: 1 x JBL 228H, 205 mm (8 in) SFG™ driver with 64 mm (2.5 in)
edge wound voice coil
High Frequency Driver: 1 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm (1.5
in) voice coil
High-Frequency Waveguide: PT-D95HF-1 (Field Rotatable)
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood
plywood
Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 469.9 x 237.5 x 254.0 mm
(18.5 x 9.4 x 10.0 in)
Weight: 12.8 kg (28.2 lb) |
Reviews
There are no reviews yet.