RAM AUDIO T-1208 Power Amplifier 8×150 Watts

8%
All products by Ram Audio

€1,044.57 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Upon Request Upon Request SKU: T-1208 Category:
• Eight and four channel models with 300W and 150W per channel • Minimal footprint and mass arround 200mm depth and 6 Kg • Optional Add-on card to interface with third party alarm systems with GPIO connections • FCM™ Faulty Channel Management system to avoid entire device shutdown • State-of-the-art layout for maximum performance and […]

 

Read more

• Eight and four channel models with 300W and 150W per channel
• Minimal footprint and mass arround 200mm depth and 6 Kg
• Optional Add-on card to interface with third party alarm systems with GPIO connections
• FCM™ Faulty Channel Management system to avoid entire device shutdown
• State-of-the-art layout for maximum performance and reliability
• Highly oversized thermal dissipation design for maximum reliability
• Superb distortion and noise figures
• All channels bridgeable by pairs
• Selectable gain in four channel groups (26, 32 and 38dB)
• Subsonic filter per channel (35Hz user selectable)
• Temperature and signal dependant, intelligent cooling system for minimal
noise
• Optimal heat extraction due to the air tunneled enclosure and insulator-less
power device attachment to the heatsink
• Direct connector-less output for maximum quality loudspeaker control
• High grade engineering inside with the latest SMD technology
• Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection
• Critical electronic and mechanical parts selection
• Innovative protection systems, FCM™ Faulty Channel Management and SSP™
SOA Sentry Protection
• Detented and optionally tamper-proof volume potentiometers
• Hi efficiency, two steps Class H Audio topology
• Protection, Signal and Clip indicators per channel
• Power On and Standby general indicators
• Extremely compact, fully featured QuantaPulse Power supply
• Low current consumption and heat generation allowing less demanding
conditions for multiple amplifier installations
• Factory preset worldwide mains voltage power supply
• Laser cut four milimeters aluminium front panel
• Rugged 2U steel chasis

 

Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz

Phase Response (@1W 20Hz-20kHz): ±15deg

Total Harmonic Distortion (20Hz-20kHz):
Intermodulation Distortion (SMPTE):
Crosstalk (20Hz-20kHz): >70dB

Voltage Gain (selectable): 26/32/38 dB

Sensitivity: T604:1.5/0.8/0.4V – T1204:2.1/1.0/0.5V – T1208:1.4/0.7/0.4V – T2408:2.0/1.0/0.5V

Signal to noise ratio: T604:107dB – T1204:110dB – T1208:107dB – T2408:110dB

Required AC Mains (@8ohms 1/8 rated power): T604:1A – T1204:1.5A – T1208:1.4A – T2408:2.6A

Dimensions (WxHxD): 483×88.9×210 mm – 19×3.5×8.27 inches

Weight (Net): T604/T1204: 5.4Kg – 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs

Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™

OUTPUT POWER T-604 T-1204 T-1208 T-2408
RMS, 1kHz, 1.0% THD+N
4 ohms 4x 160 W 4x 320 W 8x 150 W 8x 300 W
8 ohms 4x 115 W 4x 220 W 8x 100 W 8x 195 W
Bridge @ 8ohms 2x 320 W 2x 640 W 4x 300 W 4x 600 W
Pink Noise 12dB CF
4 ohms 4x 210 W 4x 415 W 8x 180 W 8x 370 W

 

Weight 6.20 kg

Reviews

There are no reviews yet.

Be the first to review “RAM AUDIO T-1208 Power Amplifier 8×150 Watts”

Your email address will not be published. Required fields are marked *

Quick Comparison

RAM AUDIO T-1208 Power Amplifier 8x150 Watts removeLAB GRUPPEN FP 10000Q BP POWER AMLIFIER 4Χ2100 Watt/4Ohm removeLD Systems LDDP4950 DEEP² Power Amplifier 4 x 810W 4 Ohm removeELECTRO VOICE PA 4150L Installation Power Amplifier 4 Channels, 2U 4 x 150 W removeCROWN CT-8150 POWER POWER AMPLIFIER 8x150W/8Ω removeAUDAC AUDPA74 Multichannel Digital Power Amplifier remove
NameRAM AUDIO T-1208 Power Amplifier 8x150 Watts removeLAB GRUPPEN FP 10000Q BP POWER AMLIFIER 4Χ2100 Watt/4Ohm removeLD Systems LDDP4950 DEEP² Power Amplifier 4 x 810W 4 Ohm removeELECTRO VOICE PA 4150L Installation Power Amplifier 4 Channels, 2U 4 x 150 W removeCROWN CT-8150 POWER POWER AMPLIFIER 8x150W/8Ω removeAUDAC AUDPA74 Multichannel Digital Power Amplifier remove
Image
SKUT-1208E008135LDDP4950001805CT-8150AUDPA74
Rating
Price €1,044.57 incl. GR VAT €5,200.00 incl. GR VAT €803.51 incl. GR VAT€745.00 incl. GR VAT €2,636.00 incl. GR VAT €465.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 5 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderOnly 5 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content• Eight and four channel models with 300W and 150W per channel • Minimal footprint and mass arround 200mm depth and 6 Kg • Optional Add-on card to interface with third party alarm systems with GPIO connections • FCM™ Faulty Channel Management system to avoid entire device shutdown • State-of-the-art layout for maximum performance and reliability • Highly oversized thermal dissipation design for maximum reliability • Superb distortion and noise figures • All channels bridgeable by pairs • Selectable gain in four channel groups (26, 32 and 38dB) • Subsonic filter per channel (35Hz user selectable) • Temperature and signal dependant, intelligent cooling system for minimal noise • Optimal heat extraction due to the air tunneled enclosure and insulator-less power device attachment to the heatsink • Direct connector-less output for maximum quality loudspeaker control • High grade engineering inside with the latest SMD technology • Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection • Critical electronic and mechanical parts selection • Innovative protection systems, FCM™ Faulty Channel Management and SSP™ SOA Sentry Protection • Detented and optionally tamper-proof volume potentiometers • Hi efficiency, two steps Class H Audio topology • Protection, Signal and Clip indicators per channel • Power On and Standby general indicators • Extremely compact, fully featured QuantaPulse Power supply • Low current consumption and heat generation allowing less demanding conditions for multiple amplifier installations • Factory preset worldwide mains voltage power supply • Laser cut four milimeters aluminium front panel • Rugged 2U steel chasis   Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >70dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™
OUTPUT POWER T-604 T-1204 T-1208 T-2408
RMS, 1kHz, 1.0% THD+N
4 ohms 4x 160 W 4x 320 W 8x 150 W 8x 300 W
8 ohms 4x 115 W 4x 220 W 8x 100 W 8x 195 W
Bridge @ 8ohms 2x 320 W 2x 640 W 4x 300 W 4x 600 W
Pink Noise 12dB CF
4 ohms 4x 210 W 4x 415 W 8x 180 W 8x 370 W
 		POWER AMPLIFIER 4 X 2100 WATT / 4Ω Very high power  and  channel density  –   •   The  four-channel  FP 10000Q delivers a  total of 10000 W  (4 x 2500 W @ 2 ohms)  in only 2U Four-channel fexibility –   •  Four channels in one cabinet increases effciency, fexibility and value  in powering monitor systems,  line arrays, and bi- or tri-amped systems. Adjacent channels bridgeable for 2- or 3-channel operation Lab.gruppen  sound  quality  –   •   FP  10000Q  amplifers maintain the impeccable sonic performance standards set by the original fP Series, with the same durability and even greater effciency NomadLink   • ®  network  ready  – Monitoring  and  control  of  key functions accessible via the  intuitive DeviceControl software and the robust, daisy-chained NomadLink® network Patented  Class  TD  amplifer  topology  –    • Road-proven  output stage delivers Class B audio quality with Class D effciency Regulated  Switch Mode  Power  Supply  (R.SMPS)  –    • Output power remains constant even with signifcant drops in the mains voltage Effcient cooling system –   •  Unique, lightweight Intercooler® cop- per cooling system dissipates more heat to allow extended peak output Adjustable parameters –   •  Selectable Gain, scalable Voltage Peak Limiter (VPL), and bridge-mode operation allow custom confgura- tion for any system or application XLR input connectors   • Heavy-duty binding post or Speakon output connectors   • Comprehensive  protection  and warning  –   •   Excessive  output current, DC, high  temperature, very high  frequency  (VHF), short circuit, open load, mains fuse protection, and soft start
The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuit. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers
Type
PA Power Amplifiers
Rated ouput power (1kHz @ 4 Ohms)
4 x 810 W
Rated ouput power (1kHz @ 8 Ohms)
4 x 490 W
Rated ouput power (1kHz @ 8 Ohms, bridged)
2 x 1600 W
Output circuitry
Class H
Frequency response
20 - 20000 Hz
Total Harmonic Distortion (THD)
< 0.1 %
Signal-to-noise ratio
105 dB
Damping factor
> 400
Crosstalk
>70 dB
Gain
38 dB
Input sensitivity
0.775 V
Protection circuits
DC protection , short circuit , thermal overload
Controls
4 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)
Indicators
Limit , Power , Protect (protection circuit engaged) , Signal
Loudspeaker outputs
4
Speaker output connections
Speakon compatible
Cooling
highly efficient, automatic
Operating voltage
transformer
Operating voltage
230 V AC / 50-60 Hz
Weight
19,6 kg
 

Electro Voice PA 4150L features:

    * 100 Watts / 8 Ohms
    * 160 Watts / 4 Ohms
    * The amplifier channels can be bridged for more flexibility
    * Frequency response (-1dB): 10 Hz - 40 kHz
    * Signal-to-Noise Ratio: 100 dB
    * Provides excellent headroom for a wide dynamic range on music signals
    * Protection: audio limiters, high temperature, peak current limiters, turn-on delay
    * Marked level controls on the rear panel provide hidden reliable level adjustments for each channel
    * Front panel LEDs indicate signal present, 0 dB, and limit
    * Phoenix type connectors for inputs and outputs provide an easy rack wiring
    * Cooling: front-to-rear
    * Power requirements: 120V or 230V, 50 Hz - 60 Hz
    * Dimensions (WxHxD): 483 x 88 x 406 mm / 19" x 3.5" x 16"
    * Weight: 18 kg / 39.65 lbs


Model    CT475
Product Type    Amplifier
Channels    4
Sensitivity    1.4V
Rated Power Output    75W per Channel into 8 ohms
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted    110dB
Total Harmonic Distortion (THD) (full rated power, 20Hz - 20kHz)    Intermodular Distortion (from 0dB down to -40dB)    Frequency Response (at 1W into 4/8 ohms)    ± 0.5dB
Crosstalk (below rated power 20Hz to 1kHz)    > 70dB
Common Mode Rejection (20Hz to 1kHz)    > 55dB, typically > 70dB
Dimension (H x W x D)    1.75" x 19" x 14.25“
Weight    10 lbs (4.5 kg)

The DPA series amplifiers are digital power amplifiers designed to meet the specialized needs of sound contractors for Multi-Zone distributed speaker systems. They are designed in six different models of Class D power amplifiers, divided in three different architectures to meet the requirements for all kinds of applications.

They combine the best of all features in one single series of amplifiers, providing an outstanding sound quality with all the known advantages of Class D Amplifiers. Such as the excellent efficiency and very low heat dissipation. And due to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability.

The small size of a single rack space make them very interesting for fixed rack mount as well as mobile applications.

The DPA74 is built as multi channel power amplifier with four individual controllable channels containing various specific features and advanced protection circuitry which protects against DC malfunctioning, short circuit, overheating and overload.

The signal input connections are accommodated with balanced XLR connectors. The operation mode can be selected between Stereo mode, Bridge mode and Parallel mode. The output connections are accommodated with Euro-Terminal blocks.

  • Model Name / Type: DPA74 / Digital Amplifier
  • 8 ohms: 4 x 50 W
  • 4 ohms: 4 x 75 W
  • 8 ohms Bridge: 2 x 150 W
  • THD+N:
  • Signal / Noise: > 100 dB
  • Frequency Response: 20 Hz - 20kHz
  • Power Supply: 240 V AC / 50 - 60 Hz
  • Dimensions (W x H x D): 483 x 44 x 300 mm
Weight6.20 kg14.00 kg19.60 kg18.00 kg4.50 kg6.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.20 kg
Weight 14.00 kg
Ohm

Weight 19.60 kg
Weight 18.00 kg
Weight 4.50 kg
Weight 6.00 kg

Related products