RAM AUDIO T-604 Power Amplifier 4×160 Watts

941.89 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
PA Power Amplifier 4 x 160 W 4 Ohms Multichannel Power with Minimum FootprintThe T Series multichannel power amplifiers have been designed especially for installation and networked audio systems. T Series amplifiers* are available with 4 and 8 discrete channels and output ratings from 160 to 320 Watts per channel providing optimum solutions for multizoning. […]

 

Read more

PA Power Amplifier 4 x 160 W 4 Ohms

Multichannel Power with Minimum FootprintThe T Series multichannel power amplifiers have been designed especially for installation and networked audio systems.

T Series amplifiers* are available with 4 and 8 discrete channels and output ratings from 160 to 320 Watts per channel providing optimum solutions for multizoning. They feature Euroblock inputs, terminal strip outputs and a rugged 2U rackmountable chassis with 4 mm front panel.

*Also available as GPIO versions with remote and emergency paging switchin

Main Features

  • 8 and 4-channel models with 300 and 150 Watts (RMS) output power per channel
  • compact 2U rackmountable chassis, 220 mm deep, weight 6 kg only
  • GPIO versions for remote and emergency paging switching
  • FCM system
  • oversized heat dissipation system for maximum thermal stability
  • low THD and high S/N ratio
  • all channels bridgeable in pairs
  • switchable input gain (26, 32 and 38 dB)
  • subsonic filters for each channel (35 Hz)
  • intelligent, quiet fan cooling system
  • terminal strip loudspeaker connectors
  • PCBs with surface-mount technology (SMT) for increased reliability
  • balanced inputs with superior noise rejection
  • select high-quality components only
  • ICL intelligent clip limiters for each channel
  • recessed volume controls (optional SC-T perspex guard)
  • high-efficiency two-stage Class H design
  • protection, signal, clip, power on and standby LED indicators for each channel
  • compact QuantaPulse power supply
  • multi-voltage: automatic voltage converter for worldwide use, no switching required
  • protections: soft start, turn on/turn off muting, thermal overload, DC, RF, short circuit, open circuit, load mismatch and power supply overload

ICL™: improved Intelligent Clip Limiting prevents loudspeaker damage while maintaining audio quality and punch under clipping conditions.

FCM™: the Faulty Channel Management system prevents overall amplifier shutdown.

GPIO:General-Purpose-I/O-Port

QuantaPulse™ Technology: The Soft Switching Resonant QuantaPulse Power Supply is designed to provide plenty of power when needed monitoring the necessary parameters of voltage and current for a controlled performance at all times. Bi-directional data flow between the power supply and power amp module. Two very important characteristics of the QuantaPulse power supply are the optimization against over-voltages and superior reliability.

 

• Eight and four channel models with 300W and 150W per channel
• Minimal footprint and mass arround 200mm depth and 6 Kg
• Optional Add-on card to interface with third party alarm systems with GPIO connections
• FCM™ Faulty Channel Management system to avoid entire device shutdown
• State-of-the-art layout for maximum performance and reliability
• Highly oversized thermal dissipation design for maximum reliability
• Superb distortion and noise figures
• All channels bridgeable by pairs
• Selectable gain in four channel groups (26, 32 and 38dB)
• Subsonic filter per channel (35Hz user selectable)
• Temperature and signal dependant, intelligent cooling system for minimal noise
• Optimal heat extraction due to the air tunneled enclosure and insulator-less power devices attachment to the heatsink
• Direct connector-less output for maximum quality loudspeaker control
• High grade engineering inside with the latest SMD technology
• Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection
• Critical electronic and mechanical parts selection
• Innovative protection systems, FCM™ Faulty Channel Management and SSP™ SOA Sentry Protection
• Detented and optionally tamper-proof volume potentiometers
• Hi efficiency, two steps Class H Audio topology
• Protection, Signal and Clip indicators per channel
• Power On and Standby general indicators
• Extremely compact, fully featured QuantaPulse Power supply
• Low current consumption and heat generation allowing less demanding conditions for multiple amplifier installations
• Factory preset worldwide mains voltage power supply
• Laser cut four milimeters aluminium front panel
• Rugged 2U steel chasis

Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz

Phase Response (@1W 20Hz-20kHz): ±15deg

Total Harmonic Distortion (20Hz-20kHz):
Intermodulation Distortion (SMPTE):
Crosstalk (20Hz-20kHz): >70dB

Voltage Gain (selectable): 26/32/38 dB

Sensitivity: T604:1.5/0.8/0.4V – T1204:2.1/1.0/0.5V – T1208:1.4/0.7/0.4V – T2408:2.0/1.0/0.5V

Signal to noise ratio: T604:107dB – T1204:110dB – T1208:107dB – T2408:110dB

Required AC Mains (@8ohms 1/8 rated power): T604:1A – T1204:1.5A – T1208:1.4A – T2408:2.6A

Dimensions (WxHxD): 483×88.9×210 mm – 19×3.5×8.27 inches

Weight (Net): T604/T1204: 5.4Kg – 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs

Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™

Weight 5.40 kg

Reviews

There are no reviews yet.

Be the first to review “RAM AUDIO T-604 Power Amplifier 4×160 Watts”

Your email address will not be published. Required fields are marked *

Quick Comparison

RAM AUDIO T-604 Power Amplifier 4x160 Watts removeINTERM QD-4480 AMPLIFIER 4X120W removeCROWN CT-8150 POWER POWER AMPLIFIER 8x150W/8Ω removeINTER-M SP-100 SYSTEM DIGITAL AMPLIFIER 60W 6 Channel removeCROWN CT-875 POWER POWER AMPLIFIER 8x75W/8Ω removeLABGRUPPEN fP 2400Q DIGITAL S.M.P.S 4X380W remove
NameRAM AUDIO T-604 Power Amplifier 4x160 Watts removeINTERM QD-4480 AMPLIFIER 4X120W removeCROWN CT-8150 POWER POWER AMPLIFIER 8x150W/8Ω removeINTER-M SP-100 SYSTEM DIGITAL AMPLIFIER 60W 6 Channel removeCROWN CT-875 POWER POWER AMPLIFIER 8x75W/8Ω removeLABGRUPPEN fP 2400Q DIGITAL S.M.P.S 4X380W remove
Imageinter-m sp-100 digital amplifier 6ch 60w
SKUT-604QD-4480CT-8150SP-100CT-875FP 2400Q S.M
Rating
Price 941.89 incl. GR VAT 852.00 incl. GR VAT 2,636.00 incl. GR VAT 573.29 incl. GR VAT 1,846.00 incl. GR VAT 2,914.00 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityAvailable on backorderIn stockAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

PA Power Amplifier 4 x 160 W 4 Ohms

Multichannel Power with Minimum FootprintThe T Series multichannel power amplifiers have been designed especially for installation and networked audio systems. T Series amplifiers* are available with 4 and 8 discrete channels and output ratings from 160 to 320 Watts per channel providing optimum solutions for multizoning. They feature Euroblock inputs, terminal strip outputs and a rugged 2U rackmountable chassis with 4 mm front panel. *Also available as GPIO versions with remote and emergency paging switchin Main Features
  • 8 and 4-channel models with 300 and 150 Watts (RMS) output power per channel
  • compact 2U rackmountable chassis, 220 mm deep, weight 6 kg only
  • GPIO versions for remote and emergency paging switching
  • FCM system
  • oversized heat dissipation system for maximum thermal stability
  • low THD and high S/N ratio
  • all channels bridgeable in pairs
  • switchable input gain (26, 32 and 38 dB)
  • subsonic filters for each channel (35 Hz)
  • intelligent, quiet fan cooling system
  • terminal strip loudspeaker connectors
  • PCBs with surface-mount technology (SMT) for increased reliability
  • balanced inputs with superior noise rejection
  • select high-quality components only
  • ICL intelligent clip limiters for each channel
  • recessed volume controls (optional SC-T perspex guard)
  • high-efficiency two-stage Class H design
  • protection, signal, clip, power on and standby LED indicators for each channel
  • compact QuantaPulse power supply
  • multi-voltage: automatic voltage converter for worldwide use, no switching required
  • protections: soft start, turn on/turn off muting, thermal overload, DC, RF, short circuit, open circuit, load mismatch and power supply overload
ICL™: improved Intelligent Clip Limiting prevents loudspeaker damage while maintaining audio quality and punch under clipping conditions. FCM™: the Faulty Channel Management system prevents overall amplifier shutdown. GPIO:General-Purpose-I/O-Port QuantaPulse™ Technology: The Soft Switching Resonant QuantaPulse Power Supply is designed to provide plenty of power when needed monitoring the necessary parameters of voltage and current for a controlled performance at all times. Bi-directional data flow between the power supply and power amp module. Two very important characteristics of the QuantaPulse power supply are the optimization against over-voltages and superior reliability.
  • Eight and four channel models with 300W and 150W per channel • Minimal footprint and mass arround 200mm depth and 6 Kg • Optional Add-on card to interface with third party alarm systems with GPIO connections • FCM™ Faulty Channel Management system to avoid entire device shutdown • State-of-the-art layout for maximum performance and reliability • Highly oversized thermal dissipation design for maximum reliability • Superb distortion and noise figures • All channels bridgeable by pairs • Selectable gain in four channel groups (26, 32 and 38dB) • Subsonic filter per channel (35Hz user selectable) • Temperature and signal dependant, intelligent cooling system for minimal noise • Optimal heat extraction due to the air tunneled enclosure and insulator-less power devices attachment to the heatsink • Direct connector-less output for maximum quality loudspeaker control • High grade engineering inside with the latest SMD technology • Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection • Critical electronic and mechanical parts selection • Innovative protection systems, FCM™ Faulty Channel Management and SSP™ SOA Sentry Protection • Detented and optionally tamper-proof volume potentiometers • Hi efficiency, two steps Class H Audio topology • Protection, Signal and Clip indicators per channel • Power On and Standby general indicators • Extremely compact, fully featured QuantaPulse Power supply • Low current consumption and heat generation allowing less demanding conditions for multiple amplifier installations • Factory preset worldwide mains voltage power supply • Laser cut four milimeters aluminium front panel • Rugged 2U steel chasis Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >70dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™

Power Output Level:  QD4480                       

8ohm (Quad Ch)       80W    
4ohm (Quad Ch)       120W    
8ohm bridged mono   240W 

Input Sensitivity (8ohm, 1kHz)  0.775Vrms
Input Impedance 20kohm Balanced 
Slew Rate (8ohm, Full Swing) ±30V/?sec
Frequency Response (±0.5dB) 20kHz ~ 50kHz 
T.H.D. (f=20Hz~20kHz, Half Power) 0.03% 
Signal to Noise Ratio 105dB
Damping Factor (8ohm, 1kHz)  100
Rasidual Noise  -85dB
Channel Separation (8ohm, 1kHz)  80dB
Voltage Gain (4ohm)  26dB 29dB 32dB
Power Source  100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
Power Consumption  300W 420W 770W
Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb
Dimensions  482(W) x 88(H) x 369(D) mm
/19(W) x 3.5(H) x 14.5(D) in
 

Model    CT475
Product Type    Amplifier
Channels    4
Sensitivity    1.4V
Rated Power Output    75W per Channel into 8 ohms
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted    110dB
Total Harmonic Distortion (THD) (full rated power, 20Hz - 20kHz)    Intermodular Distortion (from 0dB down to -40dB)    Frequency Response (at 1W into 4/8 ohms)    ± 0.5dB
Crosstalk (below rated power 20Hz to 1kHz)    > 70dB
Common Mode Rejection (20Hz to 1kHz)    > 55dB, typically > 70dB
Dimension (H x W x D)    1.75" x 19" x 14.25“
Weight    10 lbs (4.5 kg)


- 6CH 60W DIGITAL AMPLIFIER - LIGHT WEIGHT - 6 BUS BROADCASTING FUNCTION WITH A UTP (CATEGORY 5) CABLE. - VOLUME AND 5 BAND EQ TUNING FUNCTION BY CHANNEL - AMP ID AUTO/MANUAL ALLOCATION FUNCTION - SELF-BROADCASTING FUNCTION USING A LOCAL INPUT - INTERFACE FUNCTION WITH OTHER EQUIPMENT USING A CONTROL INPUT/OUTPUT CONTACT
  • Manufacturer: INTER-M
  • Category: AMPLIFIERS
  • Use: POWER AMPLIFIERS 100V
  • Measurement Unit: Attribute34381
  • Warranty Months: 12
  • Depth (cm): 38.0
  • AC Line Voltage and Frequency Configurations Available: 220-240VAC DC24V
  • Height (cm): 8.8
  • Weight (Kg): 13.0
  • Order Quantity: 1
  • Power Output: 60
  • Rack Installation Possible: Yes
  • Channels: 6
  • Power Output W/4Ω: 60
  • Frequency Response (at 1W, 4/8Ω) (dB) ±: 80Hz-20KHz
  • Catalog: Professional
  • Amplifier Type: Power Amplifier
  • Load Impedance: Ohm
  • Group: Attribute49042, Attribute50583
  • Width (cm): 48.2

Model    CT475
Product Type    Amplifier
Channels    4
Sensitivity    1.4V
Rated Power Output    75W per Channel into 8 ohms
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted    110dB
Total Harmonic Distortion (THD) (full rated power, 20Hz - 20kHz)    Intermodular Distortion (from 0dB down to -40dB)    Frequency Response (at 1W into 4/8 ohms)    ± 0.5dB
Crosstalk (below rated power 20Hz to 1kHz)    > 70dB
Common Mode Rejection (20Hz to 1kHz)    > 55dB, typically > 70dB
Dimension (H x W x D)    1.75" x 19" x 14.25“
Weight    10 lbs (4.5 kg)

  

High-tech in professional amplification!

The fP 2400Q is a lightweight and space-saving four-channel power amplifier, ideal for
use in high quality touring sound systems as well as in demanding permanent installations.
The fP 2400Q offers a diverse choice of applications, such as: multi-channel monitor
systems, four-channel reproduction, and compact amplification in active 2-, 3-, and 4-way
systems.
The fP 2400Q makes possibile the bridge connection of one or two of the two pairs of
channels (channel A and B and/or channel C and D). It also features Lab.gruppen?s unique
power matching solution, the MLS switch, which offers endless combinations for solving
most of the problems related to varying impedances and maximum power capacities of
loudspeakers. The latest semiconductor technology is utilized in the new ferrite Power (fP)
amplifiers.
This, together with Lab.gruppen?s proprietary copper cooling system, Intercooler?, enhances
the 2 ohms capacity. Two easily accessible dust filters on the front ensure a clean front-to-rear
airflow. Additionally, a new Bi-phase wiring scheme also increases the capacity of the switch
mode power supply. This extends the power bandwidth in the low end.

Key Features:
4 x 370 watts @ 8 ?
4 x 380 watts @ 4 ?
4 x 500 watts @ 2 ?
(Measured just below clip level, with all 4 channels driven)
Light weight and compact: only 8.6 kg (19lbs), 2U high
MLS? Switch: Lab.gruppen?s unique power matching for different loads

New Features:
Replaces the LAB 1200C
Easily accessible dust filters
Improved low-end power bandwidth
Extruded front panel for increased stability

Besides the traditionally superb Lab.gruppen sonic performance, there is a full line of features
to make the fP family functional in all situations from installation to high performance live
sound systems:

Regulated switch mode power supply
Today there are many lightweight, switch-mode amplifiers in the market. However, the unique
Lab.gruppen switch-mode power supply technology offers a number of essential advantages
that make it superior to other and seemingly similar power supply designs. The most important
features are the regulated power supply and the extreme power efficiency. The regulated power
supply easily deals with a very high variation in the AC mains voltage: it can drop by up to 20%
below its nominal level - e.g. to 180 V instead of 230 V ? without any problem. Perhaps even
greater benefits result from the extreme efficiency of Lab.gruppen amplifiers: only a fraction of the
energy from the AC mains is turned into heat.
A regulated power supply also presents some other sonic advantages, such as better cone control
and the same fast response as a conventional power supply.

Sophisticated protection circuitry, combining:
ALS? short circuit protection; the Adaptive Limiting System permits very high peak currents, but
keeps the amplifier within the Safe Operation Area
DC protection; protects against infrasonic signals
VHF protection; protects the loudspeakers against strong very high frequency non-musical signals
above the audible range
Thermal protection; prevents the amplifier from being overheated. The protection indicators on the front
panel are switched on, as a warning, before the protection process is initiated
AC protection; shuts down the power supply if the line voltage is outside the operating voltage
Clip limiter; prevents severely clipped waveforms from reaching the loudspeakers, whilst maintaining
full peak power.

Weight5.40 kg15.50 kg4.50 kg13.00 kg4.50 kg10.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.40 kg
Weight 15.50 kg
Weight 4.50 kg
Weight 13.00 kg
Weight 4.50 kg
Weight 10.20 kg