If you own a pair of studio monitor speakers, then this pack is perfect for you.

Our Active Speaker Pack will improve the quality of your home studio with a pair of isolation pads for your monitors, our Nano Patch + volume controller, and four 3 metre cables to make it operational. A great value pack, providing a genuine enhancement to your home studio usability.

 

The M-Patch 2 is a compact desktop/rack-mountable sized passive volume attenuator and patch control device. Building on the success of the original M-Patch, the new M-Patch 2 is a feature packed passive problem solver for nearly all production environments. A great way to passively attenuate stereo signals from soundcards, CD players, pre-amps, and mixers, the M-Patch 2 front panel rotary controls allow precise level adjustments for two input sources. Featuring balanced combo XLR/TRS input jacks and XLR outputs, RCA & 3.5mm jack inputs, mono/stereo summing switch, Mute switch, A/B output pairs, and a built in stereo headphone amplifier, the M-Patch 2 has all bases covered.

- High quality? passive volume attenuator
- Great monitor switching device
- 2 x Input channels, 2 x Output channels
- Combo, RCA, & 3.5mm input connectors
- XLR outputs (balanced or unbalanced depends on the inputs selected)
- Mono/Stereo summing switch
- System mute function
- Built in headphone amplifier
- Quality components and rugged construction
- Desktop or Rack-mountable installation
- External 16Vac power supply (Supplied. Only required for operation of headphone amplifier)

Mackie Big Knob Studio Monitor Controller and Interface

• Three Sources and Two Monitor Pairs
• Classic Big Knob Volume Control
• Independent Trim on All Sources
• Mono, Mute, and Dim Functions

  The Mackie Big Knob Studio is a monitor controller and interface that allows you to choose between three audio input sources and two monitor pairs. It can be used for project and professional studios and is designed to increase your workflow for recording and mixing applications.

  It features a built-in 2x2 USB recording interface with two Onyx mic preamps and phantom power for condenser microphones. Recording and playback is at 24-bit/192 kHz resolution and the cue mix allows for controlled blending of direct inputs with other signals for zero-latency recording. Choice of recording paths provide flexibility for applications like podcasting and more.

  Additionally, other features include flexible source connections, a convenient 1/8" input for your smartphone, dual headphone outs with independent level control, a built-in talkback mic, and 16-segment high-resolution input source metering.

  Finally, with its sturdy and built-like-a-tank design, the interface is compatible with all major DAWs on both Mac and Windows platforms. The Big Knob Studio features a download for ProTools | First and Waveform software and The Musician's Collection plug-in package including 23 high-quality plugins with BBD Delay, Level Lite, 304E EQ, and 304C Compressor. To authorize the software, simply input the mixer's serial number on the website.

  Professional Source and Monitor Selection

  • Choose between 3 sources and 2 monitor pairs
  • Classic Big Knob volume control
  •  Independent trim on all sources and monitor outs
  • Mono, mute and dim functions

  Flexible 2x2 USB Recording Interface

  • Two boutique-quality Onyx mic preamps including phantom power for condenser microphones
  • High-resolution 192kHz / 24-bit recording and playback
  • Cue mix allows controlled blending of direct inputs with other signals for zero-latency recording

  Comprehensive Feature Set for Professional Studios

  • Flexible source connections including convenient 1/8” input for your smartphone
  • Dual headphone outs with independent level control
  • Built-in talkback mic for easy communication with artists
  • 16-segment high-resolution input source metering

  Professional Production Content

  • Content
    • Pro Tools | First and Waveform OEM professional software and plugin packages included
    • The DAW Essentials Bundle for Waveform OEM includes 16 powerful plugins like Equalizer, Compressor, Reverber8, and Limiter
  • Included Software from Avid, including Pro Tools | First
    • An industry standard for decades, Pro Tools | First is easy enough for beginners yet sophisticated enough for experienced musicians. Get many of the same tools used by your favorite artists and recording studios. And now you can collaborate online with anyone, anywhere, and create at the speed of your imagination. Available for macOS and Windows operating systems. 
    • In addition to the powerful plug-ins within Pro Tools | First, this mixer comes with the exclusive Mackie Musician Collection featuring 23 fantastic plug-ins, including:
      • Avid 304E EQ: Add musical warmth with a treble and bass equalizer with sweepable mid control
      • Avid 304C Compressor: Tweak the clarity, balance, and rhythmic feel of music with this optical-modeled compressor
      • BBD Delay: Create delay, chorus, and vibrato effects based on a classic guitar pedal
      • Black Op Distortion: Add rich distortion based on a classic distortion pedal
      • Black Shiny Wah: Achieve the famous classic tones of a respected wah wah pedal
      • Black Spring Reverb: Get the twang and space of a vintage amplifier
      • C1 Chorus: Emulates a classic chorus pedal
      • DC Distortion: Dial up a range of overdriven tones with this Avid custom distortion effect
      • Eleven Lite: Get the sound of popular guitar amps and speaker cabinets
      • Flanger: Create esoteric sounds with this homage to vintage and modern flangers
      • Graphic EQ: Sculpt frequencies with ease
      • Gray Compressor: Add warmth to tracks based on a vintage Ross compressor
      • Green JRC Overdrive: Get the coveted sounds of a classic IC overdrive pedal
      • In-Tune: Keep your instruments in tune with this digital tuner
      • Orange Phaser: Create interesting effects with this phase shifter based on a classic design
      • Roto Speaker: Recreate the sounds of a Leslie rotary speaker cabinet
      • Sci-Fi: Add analog synth-type ring and frequency modulation
      • Studio Reverb: Create natural-sounding reverb and ambient effects
      • Tape Echo: Add vintage analog delay and chorus effects
      • Tri Knob Fuzz: Get the Hendrix tone with this fuzz box based on one of the first fuzz pedals
      • Vari-Fi: Create the effect of audio changing tape speed
      • Vibe Phaser: Add phase-shift and rotary speaker effects
      • White Boost: Boost gain without coloring tone

The Behringer Monitor2USB is a monitor controller and USB audio interface designed for home and project studios. It pairs a large VCA control knob for your overall output level with the ability to select among three sets of active studio monitors, as well as two sets of headphones. With its USB jack, you can connect your computer straight to the device so that you may play music from your digital library, or you can mix straight from your DAW. Through its XLR inputs, you can route analog sound, balanced or unbalanced. 

The VCA amplifier provides several benefits. For example, it allows DC current to flow through the volume control, rather than the audio signal, and thus, bypasses any DC-related signal degradation. This also helps in making sure your stereo image doesn’t drift as you crank the volume knob; anyone who’s experienced in monitor controllers knows this can be a problem—a problem mitigated in the Monitor2USB. The volume knob itself is quite large, and this too serves a function: Such a large size allows for more precision as you turn the control, so you can achieve minutely specific level adjustments, which might be necessary as you switch from monitoring post-production projects to music mixes.

You can use its three sets of outputs in a variety of ways—for instance, you can hook up two monitors and a subwoofer, or three sets of monitors, one of which can serve as your dedicated mono check. On the headphone outputs, a crossfeed control mimics the stereo experience of sitting in front of your speakers by feeding a miniscule amount of signal from the right to the left and vice versa. Amongst other benefits, this feature helps mitigate ear fatigue over long sessions. Mono and Dim buttons are on hand to help you in the mixing process. Included with the Monitor2USB are a power cable and a full, complimentary copy of Tracktion—a DAW to help you in your recording, editing, and mixing journeys.

• Large volume knob with VCA control for precise level adjustments
• Built-in stereo USB audio interface
• 2 high-quality stereo inputs
• 3 independent monitor outputs to connect two stereo monitors and one mono monitor
• 2 headphone amplifiers with separate volume controls
• Crossfeed control emulates the stereo speaker panorama when listening through your headphones
• Convenient Mono and Dim functions
• Included eco-friendly power supply
• Designed and engineered in Germany

• Absorber panels made of high-density-foam
• Optimizes the acoustic performance of your speakers
• 3 different inclination angles
• Suitable for near-field monitors

• Color: anthracite
• Size: M
• Dimensions: 250 x 320 mm
• Weight: 250 g

• 2 x Shock Stop M

• Damping of vibrations and resonances of studio and hi-fi loudspeakers
• Correction of the inclination of studio and hi-fi loudspeakers
• Height adjustment of studio and hi-fi loudspeakers

MC1.1 - Monitor PreAmp

Fall in love with your vinyl again!

Hot on the heels of the Drawmer MC2.1 well known for its functionality and transparency comes its new sibling the MC1.1 Monitor Preamp, offering the same fantastic sound but with a revised feature set more suitable for a less complex post production booth or home use where multiple speaker setups are not permissible or even required, and with the addition of a new RIAA phono stage the MC1.1 is a great solution for your precious turntable setup.

The front panel is dominated by the two large, independent volume controls for the main line outs and the headphone amplifier, both incorporate a paralleled custom quad pot for excellent channel matching and the smoothest possible action. There are also individual switches for each input source and output section making an elegantly simple yet functional user interface.

• Ultra low noise and transparent circuit design.
• Linear power supply with low hum toroidal transformer and internal voltage selector switch.
• 3 Input Sources - Balanced XLR, MP3 Player 3.5mm Jack & Switchable Line/Phono (RIAA MM) RCA.
• Two switchable output stages, Balanced XLR and RCA.
• Mono Sub woofer output available simultaneous to balanced outs.
• Parallelled custom quad pots on main and headphone level controls for excellent channel matching and smooth feel.
• Independent volume controls for the main outputs and headphone section.
• Rugged steel chasis and stylish brushed aluminium cover.
• Can be stacked and is rack mountable (with the MCB 2U mounting kit).
• Dimensions: L 272mm x W 215mm x H 81mm. Weight: 2.5kg.
• Designed and manufactured by Drawmer in the UK.