Content |
HK Audio A.C.T.O.R. DX
A new Dimension in Performance
The new ACTOR DX is a self-contained, active high-tech PA system which makes use of innovative digital technologies to achieve a level of performance that previously was not thought possible.
56-Bit Processing Power and Top-Flight Components
In the ACTOR DX system, high-end components like the 1.4" B&C driver and the PWM digital power amplifiers with their excellent transient response are combined with a new kind of controller that uses its 56-bit signal processor to provide detailed dynamic compensation of typical loudspeaker colorations.
Innovative DDO??? Controller
Every loudspeaker has a specific sonic character. Like an instrument, its timbre will change with load, it will produce distortion, harmonics, resonances???in short, its total response is constantly changing. And in a system in which several loudspeakers are operating together, these undesirable effects are compounded. This is the point at which the DDO??? technology (Digital Dynamics Optimisation) of the new ACTOR DX system comes into play. Based on extensive experience gathered with the HK AUDIO DFC Digital Field Controller, our engineers have developed an extremely powerful controller for the ACTOR DX which is capable of compensating for these dynamic deviations from the ideal response. The final result is a breathtakingly natural and forceful sound that remains stable and eminently manageable all the way from whisper soft to raging loud. To accommodate several common scenarios and simplify the management of different configurations, the DDO??? controller comes pre-equipped with 8 presets.
HK AUDIO?? Sound-Know-How
One thing our experience has taught us clearly is this: a digital controller cannot magically transform inferior components into a prized system. Following this philosophy, every loudspeaker cabinet in the ACTOR DX system has been designed to produce state-of-the-art results without a controller. The subsequent additon of the DDO??? controller then serves to bring that which is already very good that much closer to perfection, thereby producing previously unobtainable sonic results.
Facts & Features
* 56-bit D.D.O.??? system controller
* 8 controller presets
* 3,200 W RMS of total system power
* 2x mid-high units (12“/1.4“), 600-watt PWM power amp and DuoTilt???
* 2x active bass cabinets (15“), 1000-watt PWM power amp
* 2x passive bass (15“)
* ergonomically formed hand-grips
| 1000W, portable PA system with 5 channel digital mixer, 12" subwoofer, 10 x 1.5" driver line array speaker, Bluetooth input, SPX digital reverbs, 1knob EQ and multi-band compressor for master output.
- 1000W (HF:190W+LF:810W) Class-D power output
- Best in class 12" subwoofer
- 10x 1.5" drivers for slim line array speaker
- Digital mixer (3 mono mic/line + 1 stereo line)
- Multi-band compressor "mode" for master output
- 1-knob EQ for per channel
- High resolution SPX digital reverbs (4types, parameter control)
- 2x Hi-Z (high impedance) inputs
- Link out and monitor out
- Dedicated cover included
- Optional reverb foot switch
- Optional dolly for more portability
Power:1000W
Dimensions: |
System: 334 x 2,000 x 418 mm (maximum) |
(Console): |
1000W (Powered subwoofer: 810W, Line array speaker : 190W) |
Inputs/Outputs: |
3 mono mic/line + 1 stereo line/2 mono line / 1 Link out, 1 Monitior out |
Equalizer: |
multi band EQ |
Dimensions: |
System: 334 x 2,000 x 418 mm (maximum), |
|
LD Systems DAVE 12 G3 - Active PA-System with DSP
The new LD Systems DAVE 12 G3 is the perfect active PA system for high-powered live gigs, multimedia presentations, and permanent installations in bars and clubs. A 12" bass reflex subwoofer and the satellites with 6.5" drivers and HF horns ensure a good sound with driving, defined bass, natural mids, and clear treble. The 2.1 power amp stage is built into the subwoofer and provides the system components with 2000 W Peak power.
The soul of the DAVE 12 G3 is the LD LECC DSP digital signal processor, which controls all important system functions. It includes specially amplitude and low-latency optimised crossovers, separate equalisers and limiters for the bass, mid, and treble frequency ranges, and a dynamic compressor that controls the subwoofer according to volume and provides for increased punch at low volumes.
The professional full range of features of the DAVE 12 G3 includes sturdy multiplex cabinets, all important protection circuits, RCA, XLR/jack combo and Speakon-compatible connectors, and ergonomically shaped, recessed handles. The LD "Evolutive" handles of the subwoofer are an important innovation with a metal ring handle that permits a secure and convenient grip from all sides. For accurate vertical orientation of the satellites, the speaker supports are vertically adjustable by ± 13,5° max. in seven increments.
Protection covers for the system components and a castor board with a lashing strap for easy transport are available as accessories. Matching speaker stands, spacer tubes, and mounting forks are also available separately.
The DAVE 12 G3 system is ideally suited for portable use and also makes a great impression in permanent installations.
Product type
PA Complete Systems
Colour
Black
Max. SPL (continuous)
119 dB
Max. SPL (peak)
130 dB
Frequency response
40 - 19000 Hz
Dispersion (H x V)
90 x 40 °
Weight
48,5 kg
Subwoofer
Low/mid driver dimensions
12 "
Woofer size
304.8 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2.5 "
Woofer voice coil (mm)
63.5 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
435 mm
Subwoofer height
500 mm
Subwoofer depth
540 mm
Subwoofer features
LD Systems "Evolutive" handles , threaded flange M20
Mid/Hi System
Midrange size
6.5 "
Midrange size
165.1 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1.75 "
Midrange voice coil
44.5 mm
Horn
CD horn
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Speakon compatible
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
15 mm Plywood
Mid/Hi system cabinet surface
texture paint
Mid/Hi system width
250 mm
Mid/Hi system height
400 mm
Mid/Hi system depth
250 mm
Mid/Hi system features
ergonomically shaped insert handles , SM707 stand mount 36 mm
Amplifier module (integrated in subwoofer)
Amplifier
Class A/B
Amplifier output system (RMS)
500 W
Amplifier output system (peak)
2000 W
Protection circuits
limiter , overload , short circuit
Cooling
volume-controlled fan
Controls
Power , Sub level , Subwoofer Phase Reverse , volume
Indicators
Limit , on/off , Protect (protection circuit engaged) , Signal
Operating voltage
transformer
Operating voltage
220 V AC - 240 V AC
Line inputs
2
Line input connectors
6.3 mm jack , RCA , XLR
Line output connectors
XLR
Loudspeaker outputs
2
Speaker output connections
Speakon compatible
Internal sampling frequency
1000 kHz
| LD Systems MIX 10 A G3
Active 2-Way Loudspeaker with Integrated 7-Channel Mixer
The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 10 A G3 integrates a 7-channel mixer and Class D amplification with 2 x 400 watts peak power. The compact bass reflex loudspeaker features a 10" custom woofer and 1" Celestion HF driver complement, 65 Hz to 20 kHz frequency response and 90° x 60° dispersion delivering crystal clear sound with punch and detail.
Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels with 2-band EQ, 48 V phantom power plus switchable hi-Z input (CH1) and stereo line channel. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering and XLR monitor and subwoofer outputs. In addition, the LD MIX 10 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A speakON output allows powering the passive LD MIX 10 G3 to easily create a stereo setup.
The rigid enclosure is constructed with tough plywood featuring a 50° monitor angle and Dual-Tilt pole receptacle for 0° or 5° mounting angles. On its own or in tandem with the passive unit, the LD MIX 10 A G3 provides amazing performance and versatility in a lightweight, easily portable package.
Product type |
PA loudspeaker |
Type |
active |
Woofer dimensions |
10 " |
Woofer size |
254 mm |
Woofer brand |
Custom-made |
Tweeter dimensions |
1 " |
Tweeter dimensions (mm) |
25.4 mm |
Tweeter brand |
Celestion |
Dispersion (H x V) |
80 x 70 ° |
Frequency response |
65 - 20.000 Hz |
Amplifier |
Class D |
Amplifier output (RMS) |
2 x 200 W |
Amplifier output (peak) |
2 x 400 W |
Max. SPL |
124 dB |
Protection circuits |
limiter, over-current, overload, short circuit, thermal overload |
Mixer
Channels |
7 |
Mic inputs |
3 |
Mic inputs |
6.3 mm jack, XLR |
Controls for Mic Inputs |
+ 20 db switchable, DFX Send, EQ Hi, EQ Low, Hi-Z Switch (channel 1 only), level |
Line inputs |
2 |
Line input connectors |
2 x XLR, 3.5mm TRS |
Controls Line Inputs |
level |
Hi-Z inputs |
1 |
Hi-Z input connectors |
6.3 mm jack |
Input Impedance Hi-Z Input Connectors |
1000 kOhm |
Monitor Line Outputs |
2 |
Connector Type Monitor Line Output |
XLR |
Controls for Monitor Line Output |
Monitor Volume, Sub level |
Max Output Level Line Output Monitor |
17 dBu |
Record Outputs |
1 |
Increased power main output (at 4 ohm) |
200 W |
DSP Digital Effects Unit
DSP Number of Programs |
16 |
DSP Controls |
DFX Return, footswitch, Mute switch, presets |
DSP Display Elements |
Peak LED |
Main Section
Main section controls |
Balance, EQ Hi, EQ Low, EQ Mid, Master Volume, mono/stereo, Phantom Power, Power On/Off, switch operating voltage |
Main section indicators |
4-segment Level Meter, power LED |
Phantom power |
48 V |
Mains connector |
IEC socket |
Operating voltage |
SMPS |
Operating voltage |
110 - 120 V ~ 50/60 Hz or 220 - 240 V ~ 50/60 Hz, automatic switching |
Power consumption |
500 W |
Cabinet
Cabinet construction |
Bass Reflex |
Cabinet material |
16 mm Plywood |
Cabinet surface |
texture paint |
Cabinet colour |
Black |
Width |
315 mm |
Height |
489 mm |
Depth |
307 mm |
Weight |
12,3 kg |
Other features |
Bluetooth, dual-tilt flange (0°/5°), Ergonomic handle |
| The ultra compact MAUI 5 weighs in at less than 11 kg while delivering 800 watts of peak power and a maximum SPL of 120 dB. Providing both sound reinforcement with extended coverage and feedback resistant monitoring the subwoofer base and 3-piece column system assembles in seconds with custom multipin connectors. The junior member of the MAUI family is most easily portable and fits onto any car seat.
The vented 8" subwoofer also houses the system's Class D amplification with overcurrent, short circuit and thermal protection, LD Systems' proprietary LECC digital processing and a 4-channel mixer. Featuring Bluetooth© technology for wireless streaming and microphone, line level and hi-Z inputs which can be used simultaneously the MAUI 5 lets you connect a wide variety of sources including music players and instruments such as keyboards or guitars. Individual level controls, subwoofer and master volumes plus high shelf filtering for room correction enable a perfectly balanced performance.
- Item Number: LDMAUI5
- Product Type: complete PA system
- Type: active
- Colour: black
- Max. SPL (continuous): 114 dB
- Max. SPL (peak): 120 dB
- Frequency Response: 50 - 20,000 Hz
- Dispersion Angle (H x V): 120° x 20°
- Total Height: 1985 mm
- Weight: 10.9 kg
- Other Features: DSP-based signal processing
- Woofer characteristics
- Woofer Size: 1 x 8“
- Woofer Size: 1 x 203.2 mm
- Woofer Magnet: ferrite
- Woofer Brand: custom-made
- Woofer Voice Coil: 2“
- Woofer Voice Coil: 50.8 mm
- Cabinet Type: bass reflex
- Cabinet Material: ABS
- Subwoofer Width: 305 mm
- Subwoofer Height: 405 mm
- Subwoofer Depth: 395 mm
- Mid/Hi System
- Midrange Size: 4 x 3“
- Midrange Size: 4 x 76.2 mm
- Midrange Magnet: neodymium
- Midrange Brand: custom-made
- Midrange Voice Coil: 1“
- Midrange Voice Coil: 25.4 mm
- Mid/Hi System Impedance: 4 ohm
- Speaker Inputs: 1
- Speaker Input Connections: custom-made multi-pin
- Mid/Hi System Cabinet Type: closed
- Mid/Hi System Cabinet Material: ABS
- Mid/Hi System Cabinet Surface:
- Mid/Hi System Width: 82 mm
- Mid/Hi System Height: 535 mm
- Mid/Hi System Depth: 105 mm
- Amplifier Module (integrated in subwoofer)
- Amplifier: class D
- Amplifier Power System (RMS) 200 W
- Amplifier Power System (peak): 800 W
- Protection Circuits: DSP-based multiband limiter, overvoltage, short circuit, overcurrent
- Cooling System: convection
- Controls: Sub Level, MP3/Hi-Z Level, Main Level, Line Level, Mic Level, BT Level, BT Pairing Button
- Display Elements: Signal, On, Limit, Protect
- Power Supply: switching power supply
- Operating Voltage: 100 V AC - 120 V AC / 50 - 60 Hz, 200 V AC - 240 V AC, 50 - 60 Hz (automatic adjustment)
- Line Inputs: 2 x stereo
- Line Input Connectors: XLR, 6.3 mm jack
- Mic Inputs: 1
- Mic Input Connectors: XLR, 6.3 mm jack
- MP3 Inputs: 1
- MP3 Input Connectors: 3.5 mm jack
- Hi-Z Inputs: 1
- Hi-Z Input Connectors: 6.3 mm jack
- Speaker Outputs: 1
- Speaker Output Connections: custom-made multi-pin
- DSP Features
- Word Length AD / DA Converter: 24 / 24 Bit
- Internal Sampling Frequency: 48 kHz
| Even in the SMALL configuration, the smallest MAILA system is an extremely powerful, active full-range stereo system. The ground stack system consists of one MAILA SUB 2x15'' high-performance subwoofer with cardioid function, three MAILA SAT satellites and one MAILA SPA amplifier module, which drives the satellites, per stereo side.
Like the larger MAILA configurations, MAILA S combines a variety of acoustic concepts to bring maximum power and sound quality from an exceptionally compact and versatile PA system. The 2.5 kW 2x15'' high-performance subwoofer uses a bandpass design and delivers a massive and powerful bass foundation with its newly developed SysCore® DSP.
The MAILA SAT satellites in the elegant unibody aluminium housing are based on the Advanced WaveAhead® technology. Here, five 1'' tweeters are placed in front of a 6.5'' midrange driver and coupled without interference via the SonicGuide® (two combined waveguides). Furthermore, despite the compact dimensions of the satellite, the integrated passive membrane provides extended punch down to 100 Hz. The result is a classic line array dispersion with impressive throw.
On the back of the housing of each MAILA SAT is a rotating handle which hides a groundbreaking innovation: via the patented EasySplay® mechanism, users can adjust the inclination of each individual satellite continuously from 0° to 8° in the blink of an eye. The angle can be adjusted with just one hand, even under load. In this way, every MAILA system offers a uniquely flexible concept for adapting the sound coverage to any sound reinforcement situation at any time.
MAILA is not just "one" product, but a scalable sound reinforcement system that sets new standards in its diversity and flexibility. If required, the MAILA SPA module with its SysCore® DSP can control up to eight MAILA SAT and, in addition to the ground stack variant, also enables flown configurations with a separately placed subwoofer. In this way, MAILA S covers small conferences and lectures just as effortlessly and precisely as DJ performances at festivals and corporate events or a small live band.
Directly on the device or via the free MAILA app (iPadOS), every MAILA system can be adjusted quickly, easily and in detail and supplied with software updates wirelessly. Based on the integrated LogoLink® Wireless Connection, operating ranges of up to 30 metres are no problem for MAILA under practical conditions. Once connected, the app automatically detects the available MAILA components and enables the system to be set up quickly and easily - including calculation of the SAT angles - in the run-up to an event. The highlight: the wireless antennas are invisibly integrated into the LD logos (LogoLink®).
With MAILA, LD Systems presents a new sound reinforcement concept with which users do not need to commit to one system only. MAILA has many faces.
Scope of delivery includes: 6x MAILA SAT satellite, 2x MAILA SPA amplifier module, 2x MAILA SUB subwoofer, 2 x MAILA POLE DB distance rod, 2 x MAILA FC1, 2 x MAILA SUB CB, 2 x MAILA SUB PC and 4 x power cable.
Product type
PA Complete Systems Accessories
Components
2 x MAILA SPA, 2 x MAILA SUB, 6 x MAILA SAT
Total Height
2502mm (Vertikal subwoofer)
Dispersion (H x V)
100° x Curvature dependent
Accessories (included)
2 x Distance bar, 2 x MAILA FC1, 2 x MAILA SUB CB, 2 x MAILA SUB PC, 4 x power cable
System Power (RMS)
7500 W
Frequency response (-6dB)
34 Hz - 20 kHz
|
Reviews
There are no reviews yet.