RAM AUDIO DQL 4.0 amplifier 2X1950 watt/2ohm -USED-

1,227.59 incl. GR VAT

Only 1 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
   Power amplifier RAM AUDIO DQL 4.0 2X1950 watt/2ohm second hand Good condition       The RAM® DQL Series Power Amps have been developped to meet the hig-hest goals in the field of professional power amplification. Their power, distor-tion and dynamics figures place them as reference in the industry. The DQL Series incorporate unique […]

 

Read more

 

 Power amplifier RAM AUDIO DQL 4.0 2X1950 watt/2ohm second hand Good condition

 

 

 

The RAM® DQL Series Power Amps have been developped to meet the hig-hest goals in the field of professional power amplification. Their power, distor-tion and dynamics figures place them as reference in the industry.
The DQL Series incorporate unique Absolute Protection Systems as the CRO™, an immediate load disconnec-tion system with an exclusive design that excludes current in the output cir-cuit relay, or the ICL™ Clip-Limiter, CSP™

 

• Instantaneous High Flow QuantaPulse Power Supply.
• Oversized Motorola® Output transis-tors in the power modules.
• High Damping Factor.
• Unique Protection Systems: ICL™,CSP™, CRO™ …
• Dual, Bridge or Parallel operation switch on rear panel.
• 2 U Rugged Steel Chassis.
• 10 mm thick, extruded and machined duraluminum front panel.
• Twin Neutrik® XLR Input Connectors.
• Dual Binding posts & Neutrik® Speakon Output Connectors.
• Unobtrusive Gripping Handles in the front panel.
• Slow Start System with circuit relay based speaker protection.
• Back to front twin cooling fans.
• Single independant fan on the power supply.
• Electronic continuously variable fan speed control.
• Usable voltage 170-245V (230V nomi-nal) or 90-128V (120V nominal).
• 2 Ohms continuous operation.

 

Technical Specifications  DQL-4.0 
Output Power    
Continuous Average Power    
RMS, 1kHz, 1.0% THD+N    
@ 2Ω    2x 1950 W 
@ 4Ω    2x 1300 W 
@ 8Ω    2×750 W 
Bridge @ 4Ω    3900 W 
Bridge @ 8Ω    2600 W 
Pink Noise 12dB Crest Factor    
@ 2Ω    2x 2600 W 
@ 4Ω    2x 1580 W 
Frequency Response    
Power Bandwidth ±0.25dB     20Hz-20kHz 
Phase Response    
@ 1 watt  20Hz-20kHz     ±15 deg 
Total Harmonic Distortion    
20Hz-20kHz     65 V/µs 
Damping Factor    
20Hz-1kHz     >800 
Voltage Gain    33.1 dB 
Sensitivity    1.6 V 
Rated Power @ 4Ω    
Signal-to-Noise Ratio    105 dB 
No weighting     
Required AC Mains    
230 V – 50 Hz  (idle)     0.5A 
@ 4Ω (1/8 rated power)     7 A 
Dimensions    
W x H x D  (mm)     483x89x460 
W x H x D  (inches)     19×3.5×18.1 
Weight    
Shipping    14Kg-30.4Lbs 
Net    13Kg-28.3Lbs 

 

Weight 15.00 kg

Reviews

There are no reviews yet.

Be the first to review “RAM AUDIO DQL 4.0 amplifier 2X1950 watt/2ohm -USED-”

Your email address will not be published. Required fields are marked *

Quick Comparison

RAM AUDIO DQL 4.0 amplifier 2X1950 watt/2ohm -USED- removeCrown 460 CSL Power Amplifier 2x205Wrms@8Ω Made in U.S.A. USED removeBEYERDYNAMIC Blueprint A150 Power Amplifier 2 x 150W USED remove
NameRAM AUDIO DQL 4.0 amplifier 2X1950 watt/2ohm -USED- removeCrown 460 CSL Power Amplifier 2x205Wrms@8Ω Made in U.S.A. USED removeBEYERDYNAMIC Blueprint A150 Power Amplifier 2 x 150W USED remove
Image
SKUDQL4.0Crown460cslA150
Rating
Price 1,227.59 incl. GR VAT270.00299.00
Stock

Only 1 left in stock

Only 1 left in stock

Only 1 left in stock

AvailabilityOnly 1 left in stockOnly 1 left in stockOnly 1 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

 

 Power amplifier RAM AUDIO DQL 4.0 2X1950 watt/2ohm second hand Good condition

 

 

 

The RAM® DQL Series Power Amps have been developped to meet the hig-hest goals in the field of professional power amplification. Their power, distor-tion and dynamics figures place them as reference in the industry.
The DQL Series incorporate unique Absolute Protection Systems as the CRO™, an immediate load disconnec-tion system with an exclusive design that excludes current in the output cir-cuit relay, or the ICL™ Clip-Limiter, CSP™

 

• Instantaneous High Flow QuantaPulse Power Supply.
• Oversized Motorola® Output transis-tors in the power modules.
• High Damping Factor.
• Unique Protection Systems: ICL™,CSP™, CRO™ ...
• Dual, Bridge or Parallel operation switch on rear panel.
• 2 U Rugged Steel Chassis.
• 10 mm thick, extruded and machined duraluminum front panel.
• Twin Neutrik® XLR Input Connectors.
• Dual Binding posts & Neutrik® Speakon Output Connectors.
• Unobtrusive Gripping Handles in the front panel.
• Slow Start System with circuit relay based speaker protection.
• Back to front twin cooling fans.
• Single independant fan on the power supply.
• Electronic continuously variable fan speed control.
• Usable voltage 170-245V (230V nomi-nal) or 90-128V (120V nominal).
• 2 Ohms continuous operation.

 

Technical Specifications
 DQL-4.0 
Output Power    
Continuous Average Power    
RMS, 1kHz, 1.0% THD+N    
@ 2Ω    2x 1950 W 
@ 4Ω    2x 1300 W 
@ 8Ω    2x750 W 
Bridge @ 4Ω    3900 W 
Bridge @ 8Ω    2600 W 
Pink Noise 12dB Crest Factor    
@ 2Ω    2x 2600 W 
@ 4Ω    2x 1580 W 
Frequency Response    
Power Bandwidth ±0.25dB     20Hz-20kHz 
Phase Response    
@ 1 watt  20Hz-20kHz     ±15 deg 
Total Harmonic Distortion    
20Hz-20kHz     65 V/µs 
Damping Factor    
20Hz-1kHz     >800 
Voltage Gain    33.1 dB 
Sensitivity    1.6 V 
Rated Power @ 4Ω    
Signal-to-Noise Ratio    105 dB 
No weighting     
Required AC Mains    
230 V - 50 Hz  (idle)     0.5A 
@ 4Ω (1/8 rated power)     7 A 
Dimensions    
W x H x D  (mm)     483x89x460 
W x H x D  (inches)     19x3.5x18.1 
Weight    
Shipping    14Kg-30.4Lbs 
Net    13Kg-28.3Lbs 

 

Power Amplifier Crown 460 CSL , 2x205Wrms @ 8Ω , Made in U.S.A.

 

Price does not include V.A.T.

 

 

PRICE DOES NOT INCLUDE VAT

 

150W RMS into 8Ω (ohms)
1U slim fit rack mount design
High performance with incredibly low noise

Weight15.00 kg8.00 kg3.50 kg
DimensionsN/AN/AN/A
Additional information
Weight 15.00 kg
Weight 8.00 kg
Weight 3.50 kg