| Content | The unidirectional dynamic microphone DAP PL-07 is ideal for live sound reinforcement and clear recording of Brass, Saxophone, Harmonica, Snare, Tom, Congas and Guitar-Bass Amps.
Technical Info
Type: Dynamic, Moving coil.
Freq.Resp.: 40 to 16.500 Hz.
Polar Pattern: Cardioid
Sensitivity (1000Hz): 1,7 mV/Pa*
(*1 Pa = 94 dB SPL)
Max SPL: 137dB
Impedance: 600 Ohm
Power supply: none
Connector: 3p. XLR male-type).
Net. Weight: 245 g
Dimensions: (Ø 32 mm x L 157 mm)
Accessories: 6 mtr balanced cable
with XLR plugs |
The D 40 with its solid all-metal body will stand up to the hardships of night-after-night onstage use "with a smile“.
The Varimotion diaphragm deep-drawing process allows the diaphragm itself to be fine-tuned with no need for tuning resonators, leading to a quantum leap in audio performance.
The transducer is protected by a sturdy wire-mesh cap and takes extremely high sound pressure levels with ease.
An integrated stand adapter and standard H 440 mounting bracket for snare drums, tom-toms, etc. make the D 40 a highly versatile tool for use on drums, percussions, wind instruments, and guitar amps.
Musical instruments, Live applications.
Dynamic microphone designed for drums and percussions, wind instruments, and guitar amps
Patented AKG Varimotion diaphragm
Custom built capsule mounting
Spring steel wire-mesh cap
Rugged all-metal body withstands typical tough handling on stage
Type Cardioid
Polar pattern 75 to 20,000 Hz
Sensitivity 4 mV/Pa (-48 dBV)
Max. SPL 144/156 dB SPL (for 1%/3 % THD)
Equivalent noise level 18 dB-A
Impedance =1000 ohms
Connector 3-pin XLR
Finish dark stage blue
Dimensions length 104 mm (4.1 in.) height (incl. stand adapter): 79 mm (3.1 in.) max. dia.: 44 mm (1.7 in.)
Net weight 245 g (8.6 oz.)
|
The Shure KSM137 is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.
Features
- A highly consistent cardioid polar pattern
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
- Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect
Performance Characteristics
- Extended frequency response
- Low self noise
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- High output level
- No crossover distortion
- Uniform polar response
- Superior common mode rejection and suppression of radio frequency interference
APPLICATIONS
Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.
- Acoustic instruments -- such as piano, guitar, drums, percussion, strings
- Wind instruments -- brass and woodwind
- Low frequency instruments -- such as double bass, electric bass, kick drum
- Overhead miking -- drums or percussion
- Ensembles -- choral or orchestral
- Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.
Suggested Applications
Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording
|
Legendary among harmonica players for its classic blues harp sound, the 520D's tradition is carried on by the 520DX "Green Bullet" and has a contoured size and shape that fits perfectly between harmonica and hands. - New volume control knob allows musicians to adjust the volume to fit each musical situation
- New rugged, dynamic cartridge with improved response
- High-impedance, omnidirectional
- Supplied with 1/4 inch connector
- Frequency response: 100 to 5,000 Hz
|
Audio Frequency Response 50 Hz - 16,000 Hz
Case Material Die cast zinc
Connector Type 3-pin XLR
Dynamic Range 107 dB
Element Condenser (self-biased)
Finish Textured Satin Black
Impedance, Low-Z balanced 200 Ω
Maximum SPL (1% THD) 132 dB
Mic Type Instrumental
Open Circuit Voltage 6 mV/Pascal
Polar Pattern Cardioid
Power Requirement 11 to 52 VDC, 4 mA
Wired/Wireless Wired
Weight Net 6.21 oz (176 g)
| The Shure SM57 unidirectional dynamic microphone is exceptional for musical instrument pickup or for vocals. With its bright, clean sound and carefully contoured presence rise, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. For musical instruments or vocals, the SM57 is a consistent choice of professional performers. It is also the standard microphone used on the podium of the U.S. President for over 30 years. Its outstanding performance, legendary reliability, and diversity of application make this "workhorse" the choice of performers, producers, and sound engineers the world over.
- Contoured frequency response for clean, instrumental reproduction and rich vocal pickup
- Professional-quality reproduction for drum, percussion, and instrument amplifier miking
- Uniform cardioid pickup pattern isolates the main sound source while reducing background noise
- Pneumatic shock-mount system cuts down handling noise
- Extremely durable under the heaviest use
- Frequency response: 40 to 15,000 Hz
| Frequency Range |
40 Hz to 15 kHz |
| Impedance |
150 Ohms |
| Load Impedance |
310 Ohms |
| Sensitivity |
56 dBV/Pa (Open Circuit Voltage, 1 kHz) |
| Color |
Gray |
| Mounting |
5/8"-27 Female, Mic Clip (Included) |
| Construction Material |
Steel, Steel Wire Grille |
| Dimensions |
ø: 1.26 x L: 6.18" / ø: 32 x L: 157 mm |
| Weight |
10.02 oz / 284 g |
|
Reviews
There are no reviews yet.