Content |
• Complete ready to use mic set
• 6M XLR Cable
• Microphone with on/off switch
• D8301 Microphone stand
The MS-3 microphone set is a complete microphone set for starters. It includes a dynamic microphone with on / off switch, the D8301 stand with flexible microphone clamp and a 6m Cable. It is a very affordable set which is ideal for schools, musicians and mobile Dj's.
Specifications Microphone stand: D8301
Cable: XLR male / female 6M
Clamp: Flexible rubber
Microphone
Switch: On / Off
Element: Moving Coil Dynamic
Polar pattern: Cardioid
Frequency response: 50Hz – 15Khz
Output impedance: 600 Ohm (1 KHz)
| Behringer Ultravoice XM8500 Dynamic Cardioid Microphone
With the BEHRINGER vocal microphone ULTRAVOICE XM8500, your voice will shine in a way it never has before, giving a powerful edge to your performances. Your creative energy and highly professional demands finally have a worthy partner. You want your voice to come across at its best, capturing your audience with its power and expression. No problem: with the ULTRAVOICE XM8500, you've got them in your hands.
Bringing out the subtlest nuances and placing them properly in the mix: that's what a good vocal microphone is all about. And that's exactly what the ULTRAVOICE does. Its cardioid characteristic picks up sound from the front with the utmost sensitivity, while strongly dampening sound from the back. This gives you more security against feedback. The integrated shock-mount system effectively reduces handling noise to an absolute minimum. The XM8500's balanced low-impedance output lets you connect it to any console or microphone preamp - provided it has enough dynamic headroom. You'll need plenty of that: the ULTRAVOICE is so powerful that you'll put your current favorite microphone in its box. Even if it cost ten times as much.
On stage, dependability counts. The ULTRAVOICE won't let you down. Its rugged construction protects it against the toughest changes you can put it through. The matte anodized surface reduces reflections from studio or stage lighting. The two-stage pop filter and tough steel mesh keep breath and pop noises out of the signal.
Dynamic vocal microphone with smooth mid-frequency presence rise for excellent vocal projection Internal shock mount system to cut down handling noise Cardioid characteristic minimizes background noise and feedback Ultra-low distortion for a super clean sound Microphone stand adapter included Ultra-professional dynamic vocal microphone 50 Hz - 15 kHz frequency response for crystal-clear, highly detailed vocals Super rugged, reliable metal construction and electromagnetic shielding High-level balanced output Two-stage pop filter minimizes breath and pop noises Sensitivity - 70 dB
Transducer |
Dynamic |
Polar Pattern |
Cardioid |
Frequency Response |
50 Hz to 15 kHz |
Maximum Input Sound Level |
not specified by manufacturer |
Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
Output Impedance |
150 Ohms |
Output Connectors |
Gold-Plated Pin XLR-3M Type |
Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
Weight |
8.47 oz. (240 g) |
| Dynamic largemembran-Microphone forBroadcast- and Syncronize-Studios and professionalPodcasting, internal Pop-Filter, Neodym Large membranCapsule (28 mm) cardiod, 40 Hz - 14 kHz, 115 dB SPL, Weight: 1.025g, Lenght: 215 mm, 520 mm diameter |
|
|
Pick Up Pattern |
Cardioid |
Frequency Response |
30 - 17,000 Hz |
Sensitivity |
2 mV/Pa +/- 3 dB |
Nominal Impedance |
200 ohms |
Min Terminating Impedance |
200 ohms |
Dimensions |
8.375" x 1.875" x 2" |
Weight |
Approx. 14 oz (385 g) |
|
|
|
The E-845S is a high-performance super-cardioid lead vocal microphone with an extended high-frequency response, specially designed for stage use.
Frequency Response : 40.....16000 Hz
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 46 x 185 mm
Weight : w/o cable 330 g
|
The E-835S is a cardioid lead vocal stage microphone specially designed to perform under pressure.
Frequency Response : 40.....16000 Hz
Sensitivity in free field, no load : (1kHz) 2,7 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 48 x 180 mm
Weight : w/o cable 330 g
|
Reviews
There are no reviews yet.