DAP AUDIO D1360 CM-1 Small Diagramm Pencil Condenser Microphone

74.09 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: D1360 Category:
The DAP CM-1 is a thin model condenser-microphone that comes with a cardioid and omni element. Depending on the application or personal taste the element can be exchanged. The CM-1 is ideally suited as a microphone for recording live ambient, drum overhead or acoustic instruments. Type: Condenser Freq. response: 30 Hz – 22 kHz (-3 […]

 

Read more

The DAP CM-1 is a thin model condenser-microphone that comes with a cardioid and omni element. Depending on the application or personal taste the element can be exchanged. The CM-1 is ideally suited as a microphone for recording live ambient, drum overhead or acoustic instruments.

Type: Condenser
Freq. response: 30 Hz – 22 kHz (-3 dB)
Polar pattern: omni or cardioid
Sensitivity: 10 mV/Pa -40 dB –
Max. SPL: 132 dB
Impedance: 200 Ohm
power supply: +48V phantom
Connector: XLR male type
Net weight: 130 g
Dimensions: 23 mm (diameter) x L 150 mm
Accessories: microphone-clip

Weight 0.13 kg

Reviews

There are no reviews yet.

Be the first to review “DAP AUDIO D1360 CM-1 Small Diagramm Pencil Condenser Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

DAP AUDIO D1360 CM-1 Small Diagramm Pencil Condenser Microphone removeSENNHEISER ME-67 Capsule elecret super shotgun removeFOSTEX MC10M MULTIPOLAR CONDENSER MICROPHONE removeShure VP-88 - M-S Stereo Microphone with Internal Matrix, Batter removeRODE NT-5-MP Matched Pair Condenser Microphones removeSENNHEISER ME-65 Electret Microphone remove
NameDAP AUDIO D1360 CM-1 Small Diagramm Pencil Condenser Microphone removeSENNHEISER ME-67 Capsule elecret super shotgun removeFOSTEX MC10M MULTIPOLAR CONDENSER MICROPHONE removeShure VP-88 - M-S Stereo Microphone with Internal Matrix, Batter removeRODE NT-5-MP Matched Pair Condenser Microphones removeSENNHEISER ME-65 Electret Microphone remove
Image
SKUD1360H10SE00022MC10MVP88H11RD00005H10SE00038
Rating
Price 74.09 incl. GR VAT 265.00 incl. GR VAT 95.50 incl. GR VAT 1,491.83 incl. GR VAT 329.00 incl. GR VAT 119.00 incl. GR VAT
Stock

Available on backorder

In stock

In stock

Only 1 left in stock (can be backordered)

Only 2 left in stock

In stock

AvailabilityAvailable on backorderIn stockIn stockOnly 1 left in stock (can be backordered)Only 2 left in stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe DAP CM-1 is a thin model condenser-microphone that comes with a cardioid and omni element. Depending on the application or personal taste the element can be exchanged. The CM-1 is ideally suited as a microphone for recording live ambient, drum overhead or acoustic instruments. Type: Condenser Freq. response: 30 Hz - 22 kHz (-3 dB) Polar pattern: omni or cardioid Sensitivity: 10 mV/Pa -40 dB - Max. SPL: 132 dB Impedance: 200 Ohm power supply: +48V phantom Connector: XLR male type Net weight: 130 g Dimensions: 23 mm (diameter) x L 150 mm Accessories: microphone-clip

The ME 67 is a long gun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphone must be placed at a distance from the sound source. Matt black, anodised, scratch-resistant finish.

Pick-up pattern : lobar
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Nominal impedance : 200 Ohm (K6)
Min. terminating impedance : 1000 Ohm (K6)
Equivalent noise level : 10 dB
Dimensions : d 22,5 x 343 mm
Weight : 100 g

MC10M is a multi capsule microphone set including a cardioid electret condenser microphone
(MC10) with the replaceable super cardioid capsule, shock mount adaptor, and wind screen.
MC10M can be used in wide applications, from studio & home recording to field sound aquisition.

FEATURES:
Replaceable 2 types of polar pattern capsule, cardioid/super cardioid as standard
Wide frequency response range
High sensitivity
Low distortion
High input withstand S.P.L.
Rugged brass case
Light weight
Shock mount adaptors, stereo mounting blacket & wind screen as standard
Dedicated carrying case as standard

SPECIFICATIONS:
Type :Back Electret
Condenser Microphone
Polar Pattern :Cardioid/Super Cardioid
Frequency Response :40Hz to 20kHz +/-10dB
Sensitivity :-40dBV/pa (10mv/pa)
Rated Impedance :200W
Equivalent Noise Level
:22dB (A weighted IEC/DIN 651)
Maximum S.P.L. :134dB (THD£0.5%, 1kHz)
Dynamic Range :112dB
Power Supply :48V Phantom Power
(IEC 268-15/DIN45596)
Current Consumption :3.5mA
Dimensions :?20mm x 150mm
Net Weight :130g (MC10 x 1)
Full Package Weight :865g

 

The Shure Model VP88 is a single-point, stereo condenser microphone for use in professional studio recording, field production, electronic news gathering (ENG), and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet withstand rigorous field production environments.

The VP88 uses a mid-side (M-S) configuration. One microphone cartridge (Mid) faces forward to capture on-axis sound using a cardioid pickup pattern. The other microphone cartridge (Side) is bi-directional, capturing sound from either side. The VP88 contains an internal M-S matrix with three settings for different degrees of stereo image seperation. The internal matrix can be bypassed if an external matrix is used or if stereo imaging is done in post-production. Switches on the top of the microphone control output mode, stereo imaging, low-frequency rolloff settings, and battery on/off.

The VP88 can operate on phantom power or an internal 6V battery. The VP88 is supplied with a multi-connector "Y-splitter" cable, foam windscreen, swivel stand adapter, 6-volt battery, and zippered carrying/storage bag. Optional accessories include an isolation mount, a 7.6 m (25 ft) microphone extension cable, a phantom power supply, and a 4.3 m (14 ft) microphone stand.

  • Time-coherent, Mid-Side (M-S) design for optimal stereo imaging
  • Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs available
  • Mono compatibility ideal for broadcast applications
  • 40 to 20,000 Hz frequency response
  • Low noise and distortion
  • Wide dynamic range
  • Switch-selectable, low-frequency rolloff (12 dB/octave below 80 Hz) for reduced pickup of ambient noise and stand vibration
  • Operates on phantom power or a 6V camera battery
  • LED power indicator
  • Internal shock mount for reduced stand vibration and handling noise
  • Built-in "pop" screen
  • Includes windscreen, swivel adapter, and Y-cable
The NT5 matched pairs are a masterpiece of small-diaphragm cardioid- condenser microphone design.Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a .5? capsule, an active J-FET impedance converter with bipolar output buffer. Finished in durable satin nickel, the NT5 is intended for either single or stereo X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case with windshields and mounts. SPECIFICATIONS: Acoustic principle: Externally polarised single diaphragm Directional pattern: Cardioid Frequency range: 20Hz - 20kHz Output impedance: 100? Signal noise ratio din iec 651:  78dB Equvalent noise:  Maximum spl: 143 dB @ 1% THD into 1k_ Sensitivity: -38 dB re 1v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL Power supply voltage:  P48 Supply (38V?52V), P24 Supply (20V-26V) Current consumption: 4 mA, 2 mA, Weight: 100g

The ME 65 is a super-cardioid microphone head designed for use with the K6 and K6P powering modules. It is especially suited to vocal and speech applications. Matt black, anodised, scratch-resistant finish.

 

  • Pick-up pattern : super-cardioid
  • Sensitivity in free field, no load (1kHz) : 10 mV/Pa +- 2,5 dB
  • Nominal impedance : 200 Ohm (K6)
  • Min. terminating impedance : 1000 Ohm (K6)
  • Equivalent noise level : 20 dB
  • Dimensions : d 44 x 131 mm
  • Weight :
Weight0.13 kg0.10 kg0.86 kg0.60 kg2.00 kg0.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.13 kg
Weight 0.10 kg
Weight 0.86 kg
Weight 0.60 kg
Weight 2.00 kg
Weight 0.80 kg