DAP AUDIO D1429 Aerobic Belt Bag

Shure PS9E Power Supply for P4HW

• Suitable for the follpwing: T11, LX1, UT1, ULX1, MX1BP, P2R, P4R
• For external power supplies
• Consists of a PS21E power supply + 9V block

Rackkit for:

• LDWS100HHD(X)
• LDWS100HHC(X)
• LDWS100BPH(X)
• LDWS100BPG(X)
• LDWS100BPL(X)
• LDWS100R(X)
• LDWS1000HHD(X)
• LDWS1000HHC(X)
• LDWS1000BPH(X)
• LDWS1000BPG(X)
• LDWS1000BPL(X)
• LDWS1000R(X)
• LDWS1616HHD
• LDWS1616BPH
• LDWS1616BPG
• LDWS1616BPL
• LDWS1616R

The IR-700D is a receiver distributor used in the TOA's infrared wireless microphone system. It employs 4 receiver mixing inputs and 2 distribution outputs. By using the IR-700D in conjunction with the IR-702T Infrared Wireless Tuner, up to 16 infrared wireless receivers can be connected to the IR-702T.

• Frequency Range: 790.850 MHz - 813.800 MHz
• Switching bandwith: 0.025 MHz
• No. of channels: 160 (10 groups of 16 CHN)
• Sensitivity: -94 dBm for 30 dB SINAD, typical
• Image Rejection: >60 dB
• S/N Ratio: >105 dB (A)
• T.H.D
• Audio Output Level XLR connector: -12 dBV
• 1/4inch connector: -18 dBv
• Audio Response: 60 Hz - 16 kHz
• Dynamic Range: >95 dB A-weighted
• Dimensions (W x H x D): 212 mm x 45 mm x 160 mm
• Power Requirements: 12-18 V dc at 400mA

Carrier frequency range: 650 to 870 MHz
Total gain (antenna + internal amplifier): 17 dB
RF input: 1 BNC socket, 50 ohms
RF output: 1 BNC socket, 50 ohms
Operating voltage: 8 VDC from PS 4000 or ASU 4000 via connecting cable
Dimensions: 110 x 35 mm (4.3 x 1.4 in.)
Weight: 100 g (3.5 oz.)

• For indoor or outdoor use, specifically, for near- field antenna setups with no preferred direction
• Integrated high-performance antenna booster for use with antenna cables up to 180 m (600 feet) long (RG 213, in conjunction with 2 x AB 4000)
• Remote powering option
• Rugged, water-resistant case, BNC output
• Status LED