DAP AUDIO D1429 Aerobic Belt Bag

No longer available!
7%
All products by DAP AUDIO

€21.80 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: D1429 Category:
Specifications Dimensions bag: 105 x 30 x 75mm (DxHxW) Belt size: 70 – 105 mm (Adjustable with Velcro)

 

Read more

Specifications Dimensions bag: 105 x 30 x 75mm (DxHxW)
Belt size: 70 – 105 mm (Adjustable with Velcro)
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “DAP AUDIO D1429 Aerobic Belt Bag”

Your email address will not be published. Required fields are marked *

Quick Comparison

DAP AUDIO D1429 Aerobic Belt Bag removeSENNHEISER NT1-1 Power adaptor removeTOA IR-700D Infrared Wireless Distributor removeSENNHEISER AC-3000 Active Antenna Combiner removeTOA IR-300M Infrared Wireless Microphone removeSENNHEISER AM-2 Antenna Adaptor for rack remove
NameDAP AUDIO D1429 Aerobic Belt Bag removeSENNHEISER NT1-1 Power adaptor removeTOA IR-700D Infrared Wireless Distributor removeSENNHEISER AC-3000 Active Antenna Combiner removeTOA IR-300M Infrared Wireless Microphone removeSENNHEISER AM-2 Antenna Adaptor for rack remove
Image
SKUD1429H19SE00135IR-700DH12SE00158IR-300MH19SE00084
Rating
Price €21.80 incl. GR VAT €99.00 incl. GR VAT €251.00 incl. GR VAT €3,329.00 incl. GR VAT €290.00 incl. GR VAT €49.50 incl. GR VAT
Stock

Out of stock

In stock

Available on backorder

In stock

Available on backorder

In stock

AvailabilityOut of stockIn stockAvailable on backorderIn stockAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentSpecifications Dimensions bag: 105 x 30 x 75mm (DxHxW) Belt size: 70 – 105 mm (Adjustable with Velcro)

The Sennheiser NT1-UK power adaptor supplies 12v D.C. regulated power for the Sennheiser ASP 2 passive antenna splitter.

The ASP 2 also powers up to 4 x EM100 / 300 / 500 G2 radio mic receivers and 2 x AB 2 active mast head amplifiers 240 volt A.C. input. (UK 3 pin). The ASP 2 with NT1-UK combination helps reduce Antenna and PSU requirements in a multi receiver system.

Sennheiser NT1-UK Features:

  • 12 volt D.C. regulated output, centre pin polarised positive
  • 1.5 amp current rating

The Sennheiser NT1-UK power adaptor supplies 12v D.C. regulated power for Sennheiser ASP 2 passive antenna splitter.

The IR-700D is a receiver distributor used in the TOA's infrared wireless microphone system. It employs 4 receiver mixing inputs and 2 distribution outputs. By using the IR-700D in conjunction with the IR-702T Infrared Wireless Tuner, up to 16 infrared wireless receivers can be connected to the IR-702T.

Specification
Power Source AC mains, 50/60 Hz (supplied from the included AC adapter)
Power Consumption 25 W or less
Input/Output 4 mixing inputs, 2 distribution outputs
Band-Pass Frequency 3.0 - 6.0 MHz
Gain 0 dB (±3 dB)
Infrared Receiver Input 75 Ω, BNC jack × 4 (Infrared wireless receiver's power source: 24 V DC,
800 mA max. in total of 4 terminals)
Distribution Output 75 Ω, BNC jack
Operating Temperature -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Case: ABS resin, black
Dimensions 210 (W) × 44 (H) × 200.9 (D) mm (8.27" × 1.73" × 7.91“)
Weight 640 g (1.41 lb) (unit only)
Accessory AC adapter* …1, AC Power cord (2 m (6.56 ft)) …1,
BNC plug-to-BNC plug cord (50 cm (1.64 ft)) …1, Rubber foot …4
Option Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-702T
together)

 

Technical Data
    RF frequency range        470 ..... 870 MHz
    Transmission loss        0 dB (+/- 1 dB)
    Nominal impedance        50 Ohm
    Antenna connector        BNC
    Remarks        max. 100 mW RF input power per channel
    Dimensions        19 ʼʼ, 1 U
    Mains voltage        100 - 240 V
    Mains frequency        50 - 60 Hz

The IR-300M is a hands-free infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.

Specification
Battery IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces).
Current Consumption Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H)
Infrared Emitter
Wavelength 870 nm (AM: Brightness modulation)
Modulation Method Frequency modulation
Carrier Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Transmission Distance Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space)
Tone Signal 32.768 kHz
Modulation Sensitivity ±4.8 kHz (1 kHz, when SPL of 84 dB is input)
Maximum Input Sound Pressure 120 dB SPL
Input Sensitivity Adjustment Adjustment range: -9 dB to 0 dB (factory preset: 0 dB)
Microphone Unit Unidirectional electret condenser microphone
Frequency Response 100 Hz - 12 kHz
Preemphasis 300 μs
Input External microphone input (φ3.5 monaural mini jack)
Battery Operation Time Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N)
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter
Dimensions 64 (W) × 91.3 (H) ×27.3 (D) mm (2.52" × 3.59" × 1.07“)
Weight 130 g (0.29 lb) (with battery and strap)
Accessory Screw driver (for setting) …1, Color label (6 colors) …1

 

General Description
Antenna front mount for connecting the antennas of EM 100 G2, EM 300 G2, EM 500 G2 receivers or SR 300 IEM G2 transmitters to the front of the rack. To be used in combination with the GA 2 rack mount.
Delivery Includes
2 x 50-ohm BNC cables
Mounting accessories
Weight0.10 kg0.50 kg0.64 kg0.50 kg0.14 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.50 kg
Weight 0.64 kg
Weight 0.50 kg
Weight 0.14 kg
Weight 0.50 kg

Related products