Content |
ER-1193
1 channel 193 Freq. PLL Receiver 822-846 MHz
2 Frequencies available:
790 - 814 MHz (Germany)
822 - 846 MHz
• 193 selectable UHF Frequencies.
• Available for 1 transmitter
• True diversity technology permits minimum dropouts in the RF link
• PLL synthesised technology for
multi-channels.
• Compact half-rack metal housing for
space saving
• "Lock-on" mode avoids accidental modification of frequency, sensitivity and power-off.
Frequency Preparation: PLL Synthesised Control
Carrier Freq. range: 600 MHz- 960 MHz
Frequency Stability: ±0.005%
S/N Ratio: >100 dB
Display: LCD
Display Contents: Frequency, Antenna A/B, Mute display, RF/AF Lever Meter, battery fuel gauge
Controls: Power On/Off, Frequency Up/down Frequency Scan, Audio Level
Audio Output Level: -12 dB
AF Output Impedance: 600 Ohm
Squelch: Pilot Tone & Noise Mute
Operation Voltage: 12-18 VDC, 500 mA
Output Connector: XRL Balanced/ 6,3 mm Unbalanced
Dimension: 211 x 152 x 40 mm (LxWxH) |
Multiple system configurations are available, with handheld vocal microphone/transmitters and UniPak® body-pack transmitters designed for use with lavalier, headworn and instrument microphones as well as electric guitars.
Two independent receivers in a single housing
996 selectable UHF channels per band and True Diversity reception for interference-resistant operation
Available in two frequency bands: 541.500 - 566.375 MHz (TV Channels 25 - 30) and 655.500 - 680.375 MHz (TV Channels 44 - 49)
IntelliScan™ feature automatically finds and sets best available frequencies on all linked receivers
On-board Ethernet interface for monitoring and controlling system parameters with included AEW Control Interface software
Advanced digital Tone Lock™ squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display
Dual Compander circuitry processes high and low frequencies separately for unmatched audio quality
1/4" external mute switch jack allows user to mute the system quickly and easily
AC pass-through allows daisy-chain AC hookup with included IEC jumper cables
Link and coordinate multiple receiver channels
High-visibility white-on-blue LCD information display
Metal full-rack receiver chassis with reinforced mounting ears and rear rack mount capability
All transmitters offer rugged, ergonomic metal bodies, programmable features, soft-touch controls, and 10 mW/35 mW switchable RF power
Backlit LCD displays on transmitters
Locking battery door on UniPak body-pack transmitter
All components store up to five preset configurations, with customized "names" if desired
|
The IR-500R Infrared Wireless Receiver is designed for use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or an electrical box.
Power Source | 24 V DC (supplied from the IR-702T) | Current Consumption | Max. 40 mA |
Infrared Detector
Wavelength | 870 nm | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | Reception Angle | Vertical: 80゜ (up to 30゜ movable downward)
Horizontal: 80゜ (up to 30゜ movable left or right) | Reception Area | Approx. 15 m (50 ft) in a space without any obstacles | Connection Terminal | 75 Ω, BNC jack | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Filter section: Polycarbonate, optical cut filter
Base: ABS resin, off-white | Dimensions | 70 (W) × 120 (H) × 72 (D) mm (2.76" × 4.72" × 2.83“) | Weight | 220 g (0.49 lb) (unit only) |
|
THE PROFESSIONAL 19" SOLUTION!
The WS100R2 Double Receiver has the same features and technical parameters like the WS100R Receiver. The 19'' size and the possibility for front mounting antennas, saves the rackmount kit and rack space. Inclusive two TNC antenna cables.
|
The IR-702T is a 2-channel infrared wireless tuner employing a fixed frequency system. This tuner is combined with an infrared wireless microphone and an infrared wireless receiver to make up the infrared wireless microphone system. The infrared microphone system eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms.
(*1) 0 dB = 1 V Power Source | AC mains, 50/60 Hz (supplied from the included AC adapter) | Power Consumption | 15 W or less | Receiving Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | Receiver Sensitivity | S/N ratio: 50 dB or more
(40 dBμV input, 1 kHz modulation, ±4.8 kHz deviation) | S/N Ratio | 61 dB or more (60 dBμV input, ±4.8 kHz deviation, A-weighted) | Tone Squelch Frequency | 32.768 kHz | Infrared Receiver Input | 75 Ω, BNC jack × 2 (Infrared wireless receiver's power source: 24 V DC,
220 mA max. in total of 2 terminals) | Output | Channel A and B: -10 dB(*1) (±4.8 kHz deviation, at volume level max.),
600 Ω, electrical balanced, 3 pole phone jack.
Note: Channel A switchable to mixer output. | Frequency Response | 100 Hz - 12 kHz | Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Case: ABS resin, black | Dimensions | 210 (W) × 44 (H) × 210.9 (D) mm (8.27" × 1.73" × 8.3“) | Weight | 630 g (1.39 lb) (unit only) | Accessory | AC adapter(*2) …1, AC Power cord (2 m (6.56 ft))(*2) …1,
Cord with a phone plug (1 m (3.28 ft)) …1, Color label (6 colors) …1,
Rubber foot …4 | Option | Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-700D
together) |
|
Wireless receiver module 6 frequencies for WA-1812, 1812C. Combined with WM-3210, 3220 hand, WM-3310 lapel, WM-3310H head |
Reviews
There are no reviews yet.