| Content |
• Tight but comfortable fit
• Fat Dj sound
• Including curled and straight cable
• Including extra pair ear cushions
DAP DH-150 is a professional fully closed DJ headphone. It has 50mm drivers to ensure a fat bass and clear high frequencies. It is finished with a silica gel headband and has a tight but very comfortable fit. Due to this tight fit and big shells you get a perfect insulation against outside noise. The head shells can be rotated 90°. The curled cable is detachable and a straight cable is included just like an extra pair ear cushions. DH-150 proves that a good DJ headphone doesn't have to be expensive.
Specifications Driver unit: Ø 50 mm
Impedance: 32 Ohm
Sensitivity: 108 +/- 3 dB
Freq. Response: 20 - 20.000 Hz
Max Power Input: 500 mW
Cord lenght: 1,4m
Connector: 3,5 mm Plug
Weight: 0,3 Kg
|
"Most on ear and over headphones have a gap" -CNET
Minimize the unsightly gap between the headband and your head for the best comfort, sound and silhouette. 5+ years of R&D resulted in a wind-tunnel worthy design that contours evenly to the shape of your head. Discover why "the fit is the sound.“
SteelFlex Headband - virtually indestructible bespoke fit
ABC+P - Anything But Circles + Plastic, because heads are not round, ears are not spheres and metal lasts longer
Memory Foam Cushions - supple long session comfort naturally adapts to your ears for faster "burn-in” & better noise isolation
MILITARY-LEVEL QUALITY
Tested beyond military-level MIL-STD-810G quality standards.
Kevlar-reinforced Cable - 1+ million bends for cables & 45 degree strain relief (100x industry standard)
Concrete Drop - 70+ drops from 1.5m onto concrete
Steelflex Headband - 10+ flat bends
Environmental Weather - survives servere high/low temperatures, humidity, salt spray & UV rays
TECHNICAL DETAILS
Type - On-Ear Supra-aural
Drivers - 40mm Dual-Diaphragm High Fidelity (patent pending)
Frequency Response - 5 - 30,000 Hz
Sensitivity - 105dB @ 1kHz 1mW
Microphone Sensitivity - -42dB @ 1kHz
Impedance - 28.5Ω
Weight - 195g (headphone only)
Plug - 45 degree, 24k gold-plated 3.5mm (1/8“) stereo
|
Ortofon O One Headphones offer you the same high quality as Ortofon's renowned styli and cartridges. O One headphones feature a strong, loud output signal (frequency range of 10–22,000Hz and sound pressure level of 112 dB) and rugged construction to withstand heavy-duty DJing or studio use. These highly sensitive Ortofon headphones work great with any DJ mixer and can even compensate for mixers with low headphone output even in loud DJ environments. O One headphones feature a closed-ear design with flexible, replaceable earpads and a detachable, single-sided headphone cord. The high-quality sound reproduction of Ortofon O One Headphones make them great not only for club DJs, but for discerning home listeners as well.
Ortofon O One Headphones Features:
- Closed design
- Foldable
- Frequency range: 10–20,000Hz
- Sound pressure level: 112 dB
- Impedance: 40 ohm
- Replaceable earpads
- Detachable single-sided cord (both standard and coiled)
- Gold-plated plugs
Also includes: - 3.5mm and 1/4" plugs
- Extra set of earpads in velour
- Carrying bag
Keep an ear on your sound, even in the craziest of venues—order the O One headphones now.
|
The Tracks headphone is an award-winning, supra-aural headphone with a subtle design, focusing on simple lines and an iconic shape.
Designed around an aluminum brace that acts as a rail system for the sliding ear cups. Phone jack cable with one-button controls and microphone.
The customizable slider comes in 2 different colors and the 40mm speaker offers a better frequency distribution and a full-spectrum sound quality with an impressive bass and detailed high frequency notes.
Tech Specs
Driver: Unit Size 40 mm
Plug: Angled Stereo Plug 3.5 mm
Speaker Impedance: 32 Ohm
Speaker Sensitivity: 112 +/- 3dB
Maximum Power Input: 70 mW
Frequency Response: 20-20KHz
|
Capital is a durable, foldable and flexible headphone from AIAIAI, that seeks to provide the on-the-go urbanite with the opportunity to listen to his or her preferred sounds in any kinds of weather at all times, while wearing a design that is effortlessly iconic, thoroughly realized and comfortable.
Made out of reinforced fiberglass with a lightweight rubber-brace, this is a headphone built to withstand heavy everyday use in urban environments. It\'s tested to withstand rain, snow and dirt while delivering clear and crisp sound from the protected 40mm driver.
Driver Unit Size40 mmPlugAngled StereoPlug3.5 mmSpeaker Impedance32 OhmSpeaker Sensitivity112 +/- 3dBMaximum Power Input70 mWFrequency Response20-20KHzMicrophone Sensitivity-42 +/- 3dBMicrophone DirectivityOmni-directionalCable length135cm
| The circumaural design of the ATH-PRO700MK2 headphones achieves remarkable isolation from ambient noise, making them perfect for immersive listening in loud environments. With brand new 53 mm diameter drivers designed especially for DJs, neodymium magnets, and 3,500 mW of power handling, these headphones deliver outstanding sound reproduction. Their compact and lightweight design makes them perfect for carrying whilst stored in the provided pouch. Supplied with two detachable cable options.
Advanced high-quality sound from newly designed Ø53mm drivers with maximum comfort for long listening sessions.
Ø53mm drivers designed exclusively for PRO700MK2 ensure outstanding sound quality
50°/90° earpiece swivelling capability provides a perfect fit for every monitoring application
Lightweight design provides maximum comfort for periods of extended use
Detachable cord with screw-in connector allows for easy replacement
Includes 2 detachable cords (one coiled and one straight)
Type: Closed-back Dynamic
Driver Diameter: Ø53 mm
Magnet: Neodymium
Frequency Response: 5 ~ 35,000 Hz
Maximum Input Power: 3,500 mW
Sensitivity: 106 dB/mW
Impedance: 38 O
Weight: 305 g
Cable: 1.2m Coiled Cord (Max. 3.0 m) and 1.2 m Straight Cord
Connector: Ø6.3 / Ø3.5 mm gold-plated stereo plug
Accessories (Optional): Carrying pouch, Detachable cable x 2, 6.3mm adapter |
Reviews
There are no reviews yet.