DAP AUDIO D1908 PDU-10 Powerdistributor with Volt- and Ampere meter

173.59 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
PDU-10 Powerdistributor with Volt- and Ampere meter The DAP PDU-10 is a 19″ powerdistributor (240V) for use in equipment-and effect-rack. It has 8 IEC outputs which can be switched by the switch on the front of the unit. Furthermore, the PDU-10 has a Volt and Ampere meter on the front so that you can control […]

 

Read more

PDU-10 Powerdistributor with Volt- and Ampere meter The DAP PDU-10 is a 19″ powerdistributor (240V) for use in equipment-and effect-rack.
It has 8 IEC outputs which can be switched by the switch on the front of the unit.
Furthermore, the PDU-10 has a Volt and Ampere meter on the front so that you can control the voltage and current at any time in order to maximise the protection of your equipment.
  240 Volt
8 IEC Outputs
Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “DAP AUDIO D1908 PDU-10 Powerdistributor with Volt- and Ampere meter”

Your email address will not be published. Required fields are marked *

Quick Comparison

DAP AUDIO D1908 PDU-10 Powerdistributor with Volt- and Ampere meter removeSHOWTEC 50622 PSA-631 With Ampère Meter in 5x63A Out 3x 32A -Used- removeWork ESD 10K Automatic Voltage Regulator removeZero88 Rack 6-Schuko 6 Channels Digital Switcher removeAdam Hall 87473 19" Mains Power Strip 6 Sockets, 3 Circuits removeSHOWTEC 50277 Powersplitter 16 Powersplit with Fuse remove
NameDAP AUDIO D1908 PDU-10 Powerdistributor with Volt- and Ampere meter removeSHOWTEC 50622 PSA-631 With Ampère Meter in 5x63A Out 3x 32A -Used- removeWork ESD 10K Automatic Voltage Regulator removeZero88 Rack 6-Schuko 6 Channels Digital Switcher removeAdam Hall 87473 19" Mains Power Strip 6 Sockets, 3 Circuits removeSHOWTEC 50277 Powersplitter 16 Powersplit with Fuse remove
ImageSHOWTEC 50622 PSA-631 with ampère meter
SKUD190850622ESD 10KRACK6SCHUKO8747350277
Rating
Price 173.59 incl. GR VAT 496.00 incl. GR VAT 814.00 incl. GR VAT 939.00 incl. GR VAT 141.40 incl. GR VAT 218.15 incl. GR VAT
Stock

In stock

Only 1 left in stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

In stock

AvailabilityIn stockOnly 1 left in stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentPDU-10 Powerdistributor with Volt- and Ampere meter The DAP PDU-10 is a 19" powerdistributor (240V) for use in equipment-and effect-rack. It has 8 IEC outputs which can be switched by the switch on the front of the unit. Furthermore, the PDU-10 has a Volt and Ampere meter on the front so that you can control the voltage and current at any time in order to maximise the protection of your equipment.   240 Volt 8 IEC OutputsPSA-631 With Ampere Meter Bring safety on stage! Power is the most important chain for a successful show on any stage. Showtec developed together with leading rental companies the power distributors that will keep your power and equipment save. The PSA-631 gives you real-time voltage and amperage information during your show. Now you can monitor your setup and make sure that the power is correctly distributed at all times. SpecificationsFront: • Digital voltage & amperage-monitoring per Phase. • Residual current circuitbreaker FI 63A 4 pol. 0,03A • 4 x 32A ʽC' automatic fuses. Back: • Input: 1,5 m (5 wires) cable with CEE-socket 3 x 63A • Output: 4 pcs. CEE 3 x 32A socket Dimensions: 19" rackmount/3U Weight: 9,5 kg

Work ESD 10K Automatic Voltage Regulator

It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.

Technical Specifications:

Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm

Zero88 Rack 6-Schuko 6 Channels Digital Switcher

Cost effective 19" dimmer

The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers real value for money. All operator controls are available through a simple, intuitive interface.

The Rack 6 is not limited in features however. Offering 12 memories, a preheat per channel, three dimmer curves and Chilli-Net compatibility the Rack 6 offers users sophistication not usually found in a dimmer in this price range.

With a range of socket options, CE certification and a three year warranty the Rack 6 is the ideal choice for users looking for a cost effective touring dimmer.


The Switch 6 is physically identical to the Rack 6, except that each channel is controlled by a heavy duty relay, instead of a dimming circuit. Ideal for switching non-dimmable loads, the Switch 6 is available with the same socket options as the Rack 6.

Features
  • 3 dimmer curves (normal, linear, switch)
  • 12 Memories
  • Preheat per channel
  • International socket options
  • 6 x 10 Amps
  • MCB per channel
  • Advanced heatsink and fan cooling
  • DMX addressing via user interface
  • 19"
  • Built in termination circuit for DMX
  • ChilliNet enabled
  • RDM hardware ready
  • Dimensions - 88mm x 483mm x 360mm
  • Weight - 8.0kg
19" Power Strip 1 U with 3 separate Power Circuits
  • Safety outlets each with 16 A / 250 V
  • Outlets of power circuit one are ruby red
  • Power circuit two is light grey and three is black
  • 2-m cable with red CEE plug 16 A pro phase / 400 V
  • cable on the side
  • 19" brackets can be mounted in for different positions
Product type 19" rack mains socket strips
Type 19" / 1 U
Number of outlets (Earthing contact / IEC 7/4) 6 (3 x 2) , Rotated 45°
Power input cables
Cable length 2 m
Cable connector 16 A CEE plug 400 V
Cross section 5 x 1.5 mm²
Operating voltage 400 V
Max. current 3 x 16 A
Cabinet material Aluminium
Colour Black
Width 485 mm
Height 44 mm
Depth 44 mm
Other features 3 phases colour-coded (red, grey, black) , Mounting brackets can be used in 4 positions
Weight 1,12 kg

Powersplitter 16 Powersplit with fuse   Power input: 380V, 16 Ampere
Input connector: 5 pole 16 Ampere CEE
Power output: 6 x 230V, 16 Ampere
Output connector: Schuko
Fuses: 3 * C-16
Dimensions: 403 x 165 x 127 mm (LxWxH)
Weight: 3,4 kg 

Weight5.00 kg3.00 kg20.00 kg8.00 kg0.60 kg3.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 3.00 kg
Weight 20.00 kg
Weight 8.00 kg
Weight 0.60 kg
Weight 3.40 kg