Content | • Master outputs with 3 way tone control
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 1 Mic, 7 Line, 2 Phono inputs
The IMIX-5.3 is a basic 3 zone control mixer. It has a logical design and all functions are very clear and easy to control. Each channel has 3 output buttons to route the channel to your desired area/zone. All outputs have their own EQ settings and with the PFL function you can monitor each area/zone with a pair of headphones. At the front it has direct inputs for microphone, line and a phone/mp3 device.
Specifications Input channels: 1 x Microphone, combo XLR/Jack
7 x Line, RCA
2 x Phono, RCA
1 x Phone, 3,5mm jack
Output channels: 3 x Master (Balanced), XLR/RCA
1 x Headphones, 6.3mm Jack
Master EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Mic EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Frequency response: 20Hz – 20Khz
T.H.D.: | The APart MA35 is probably the most complete and compact 35 watt 100 Volt mixing desktop amplifier. The amplifier has 4 inputs: 2 MIC, 1 MIC-LINE and 1LINE. The microphone inputs can have phantom power via an internal jumper. A two step priority system is standard: MIC1 can have voice activated priority (VOX) that mutes all other inputs. This VOX mute can be switched off via an internal jumper. The contact closure (via DIN5 on MIC1 or Euroblock on MIC1-2) will activate the chime and will mute input 3 (MIC3/LINE3) and 4.
The pre-amp out, power-amp input allows you to insert extra signal processors or to link the signal to other power amplifiers. Further the MA35 is equipped with a bass - treble tone control, a record output and limiter circuit on the output to avoid clipping. MA35 can operate with a 12V and 230V power supply. The amplifier has been build into a compact and sturdy metal housing. A 19” mounting bracket (Ref: MA35-19) is available as an option for rack mounting. |
| *video & audio controlvams-0808 is a kind of multiple audio/video in & out control system.the best product covering a/v systemconfiguration and simultaneously can select input audio & video signal *possible to link to pc using rs-232c data communication.built inrs-232c data communication and permits pc base software control that supplied from inter-m with presetting and other great additional functions *video switching function possible to set off & select condition of all output image *switch locking function to protect false-operation vams-0808 allows various setting modes. so it is very easy to happen the alternation of fixed selection mode. to prevent false-operation it you may set a locking mode *high frequency feature and low cross talk (?0.5db)frequency feature and cross talk are the most important factor in video / audio matrix switcher. vams-0808 has wide band audio & video high frequency response and low cross talk at excellent function *visible in/out display condition very convenient display of each out / in video & audio source *parallel connection function allows system extension to multiple sets *audio/video input & output with a/v thermal noise protection | | | | | VIDEO | Video Input | VS or VBS 1.0Vp-p 75Ω, 8CH, BNC | Video Output | VS or VBS 1.0Vp-p 75Ω, 8CH, BNC | Frequency Response | Below ±0.5dB(7MHz) | S/N | -60dB | Crosstalk | -60dB | Audio | Audio Input | 2.2Vp-p, High Impedance Unbal/RCA | Audio Output | 2.2Vp-p, High Impedance Unbal/RCA | T.H.D | Below 0.1(20Hz-20kHz) | Frequency Response | Below -3dB | S/N | 90dB | Crosstalk | -90dB | CONTORL CPU MICOM | Interface | RS-232C | Operating Temperature | -10℃~+40℃ | Storage Temperature | -20℃~+60℃ | Operating Humidity | Below 90% RH | Power Source | 100-120VAC or 220-240VACl 50/60Hz | (supplied AC mains transformer depends on country requirements) | Weight | 5kg/11lb | Dimensions | 482(W)x88(H)x220(D)㎜/19(W)x3.5(H)x8.7(D)in | | | |
| REVAMP4240T is a professional 4-channel digital power amplifier with 4 x 240 watt output power @ 100 volt, but the unit is also bridgeable to 2 x 480 watts @ 100 volt. The unit incorporates a high efficient SMPS power supply and outputs with efficient Class D output topology. REVAMP4240T is the ideal amplifier for applications with 4 zones in mono, 2 zones in stereo or even bridged dual mono or bridged stereo systems. This amplifier contains an intelligent variable speed cooling fan that only will be activated in case of emergency.
In order to match each input to its respective source the input sensitivity can be adapted to your needs. The input stage also features a build-in 250 Hz HP-filter to optimise the system for use on horn speakers whenever you would need this. Each pair of outputs can be bridged to give you 2 x 480 watts of output power! The very intuitive front display shows what is going on with one blink of an eye. The output power is constantly under control thanks to our own made limiter that prevents annoying pumping limiter sound but yet keeps the system fully under control and you still have that dynamic sound. Ease of use, high-tech, reliability and a wide versatility has never been as cleverly combined as in this REVAMP4240T amplifier. |
- 3 zones with routing facility of all input channels as desired
- 5 input channels with recessed gain controls on the rear panel, signal LED and super smooth dual-rail channel faders
- 2 microphone channels with level control, LED level meter, 3-way equalizer and talkover button
- Talkover level and response time adjustable
- Pre-fader listening (CUE) to the stereo input channels via adjustable headphone output
- Color illuminated rotary controls and rubber buttons
- Zone outputs with level control, 3-way equalizer and 10-digit stereo LED level meter
- 2 record outputs (independent of the master channels) with routing facility of all zone outputs as desired
- Inputs: 8 x line (stereo RCA), 2x line/phono (stereo RCA), switchable; 2 x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
- Outputs: 3 x master (optionally 3-pin XLR or stereo RCA) and 2 x record (stereo RCA)
- Operation via supplied power unit
- Rack installation, 2 U
- Ideal for restaurants, bars, theme parks, hotels and all applications where microphones need to be mixed with music (e.g. karaoke)
Power supply: |
230 V AC, 50 Hz |
Protection class: |
Protection class II |
Power connection: |
Power supply cord with Euro plug (provided) |
Frequency range: |
20 - 20000 Hz |
S/N ratio: |
>60 dB line
>70 dB phono |
THD: |
Line/phono <0,02 % at 1 kHz |
Gain: |
Microphone 52 dB
Line 17 dB
Phono 53 dB |
Housing color: |
Black |
Zone output: |
3 adjustable zones |
Control elements: |
Power switch, regular talkover, source selector |
Status LED: |
Signal, chanal level meter, master level meter, peak, chanal source; CUE, Talkover, ON AIR, Routing |
Connections: |
Input: Microphone via 2 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version)
Input: line/phono via 2 x stereo RCA
Input: line via 8 x stereo RCA
Output: master via 3 x 3-pin XLR
Output: master via 3 x stereo RCA
Output: rec. via 2 x stereo RCA
Output: headphones via 1 x 6.3-mm-jack (bal.) |
Channels: |
Input chanel: 2 x stereo with Line-Line/Phono switch via RCA, channel control via fader, 3-band tone control EQ, Routing master bus switch, gain control, source selector, CUE switch
Input chanel: 3 x stereo with Line-line switch via RCA, channel control via fader, Routing master bus switch, gain control, source selector, CUE switch
Microphon chanal: 2 x mono via Combination socket (XLR/jack), channel control via Rotary dial, ON AIR switch, Routing master bus switch, Talkover switch,
Master output: 3 x stereo via XLR or RCA, channel control via Rotary dial, 3-band tone control EQ
Rec. output: 1 x stereo via RCA, Routing master bus switch,
Headphones output: 1 x stereo via Jack, channel control via Rotary dial, Cue-mix-function, |
Housing design: |
(19") 48.3 cm rack installation 2 U |
Dimensions: |
Width: 48,3 cm
Depth: 14,8 cm
Height: 8,9 cm |
Weight: |
3,10 kg |
| REVAMP4120T is a professional 4-channel digital power amplifier with 4 x 120 watts output power @ 100 volt (or @ 4 ohms), but the unit is also bridgeable to 2 x 240 watts @ 100 volt (or @ 4 ohms). The unit incorporates a high efficient SMPS power supply, outputs with efficient Class D output topology and output transformers.
REVAMP4120T is the ideal amplifier for applications with 4 zones in mono, 2 zones in stereo or even bridged dual mono or bridged stereo systems. This amplifier contains an intelligent variable speed cooling fan that only will be activated in case of emergency. In order to match each input to its respective source the input sensitivity can be adapted to your needs. The input stage also features a build-in 250 Hz HP-filter to optimise the system for use on horn speakers whenever you would need this. Each pair of outputs can be bridged to give you 2 x 240 watts of output power!
The very intuitive front display shows what is going on with one blink of an eye. The output power is constantly under control thanks to our own made limiter that prevents annoying pumping limiter sound but yet keeps the system fully under control and you still have that dynamic sound. Ease of use, high-tech, reliability and a wide versatility has never been as cleverly combined as in this REVAMP4120T amplifier. |
Reviews
There are no reviews yet.