| Content | • Master outputs with 3 way tone control
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 1 Mic, 7 Line, 2 Phono inputs
The IMIX-5.3 is a basic 3 zone control mixer. It has a logical design and all functions are very clear and easy to control. Each channel has 3 output buttons to route the channel to your desired area/zone. All outputs have their own EQ settings and with the PFL function you can monitor each area/zone with a pair of headphones. At the front it has direct inputs for microphone, line and a phone/mp3 device.
Specifications Input channels: 1 x Microphone, combo XLR/Jack
7 x Line, RCA
2 x Phono, RCA
1 x Phone, 3,5mm jack
Output channels: 3 x Master (Balanced), XLR/RCA
1 x Headphones, 6.3mm Jack
Master EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Mic EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Frequency response: 20Hz – 20Khz
T.H.D.: | REVAMP4120T is a professional 4-channel digital power amplifier with 4 x 120 watts output power @ 100 volt (or @ 4 ohms), but the unit is also bridgeable to 2 x 240 watts @ 100 volt (or @ 4 ohms). The unit incorporates a high efficient SMPS power supply, outputs with efficient Class D output topology and output transformers.
REVAMP4120T is the ideal amplifier for applications with 4 zones in mono, 2 zones in stereo or even bridged dual mono or bridged stereo systems. This amplifier contains an intelligent variable speed cooling fan that only will be activated in case of emergency. In order to match each input to its respective source the input sensitivity can be adapted to your needs. The input stage also features a build-in 250 Hz HP-filter to optimise the system for use on horn speakers whenever you would need this. Each pair of outputs can be bridged to give you 2 x 240 watts of output power!
The very intuitive front display shows what is going on with one blink of an eye. The output power is constantly under control thanks to our own made limiter that prevents annoying pumping limiter sound but yet keeps the system fully under control and you still have that dynamic sound. Ease of use, high-tech, reliability and a wide versatility has never been as cleverly combined as in this REVAMP4120T amplifier. | With the MA200 mixing amplifier series, the APart engineering team has created some unique, original and above all, complete electronics. Never before has a mixer amplifier had all the features to meet a contractors demand for nearly every application.
- The most important features:
- 200 watt 100 Volt mixing amplifier
- 4 mic inputs (phantom via internal switch)
- Mic inputs have integrated speech filters and are high-class transistor balanced
- 4 Line inputs
- 4 Loudspeaker output zones can be selected (switch on/off) and have LED indication. Zone 4: selection of "Music only”, "microphone only” or both music and microphone.
- Bass-treble tone control
- Master volume control
- 3-Level priority system:
- 1. Emergency input: directly to the power amplifier (vol adjustable)
- 2. VOX Mute: Voice activated mute (adjustable) on MIC input 1 mutes all other inputs
- 3. Contact closure mutes all line inputs
- LED indication on front pannel when line inputs are muted
- 24V ouput power is activated via contact closure. Can be used to switch the 24V priority
- relays of volume controls.
- Integrated 2-tone chime has an adjustable volume and is activated by contact closure
- Build-in dynamic limiter (-3dB)
- Record output via RCA
- PRE AMP OUT - AMP IN makes it possible to insert an external signal processor or to add
|
Power Output Level R-300 PLUS
STEREO
8ohm(T.H.D 0.05%) 170W+170W
4ohm(T.H.D 0.05%) 250W+250W
BRIDGED MONO
8ohm(T.H.D 0.05%) 460W
8ohm(T.H.D 0.5%) 500W
Frequency Response 20Hz- 20kHz, ±0.5dB
Convection Cooled
SoftStart Protection System
Balanced 10kΩ@0.775V Inputs
|
- 3 zones with routing facility of all input channels as desired
- 5 input channels with recessed gain controls on the rear panel, signal LED and super smooth dual-rail channel faders
- 2 microphone channels with level control, LED level meter, 3-way equalizer and talkover button
- Talkover level and response time adjustable
- Pre-fader listening (CUE) to the stereo input channels via adjustable headphone output
- Color illuminated rotary controls and rubber buttons
- Zone outputs with level control, 3-way equalizer and 10-digit stereo LED level meter
- 2 record outputs (independent of the master channels) with routing facility of all zone outputs as desired
- Inputs: 8 x line (stereo RCA), 2x line/phono (stereo RCA), switchable; 2 x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
- Outputs: 3 x master (optionally 3-pin XLR or stereo RCA) and 2 x record (stereo RCA)
- Operation via supplied power unit
- Rack installation, 2 U
- Ideal for restaurants, bars, theme parks, hotels and all applications where microphones need to be mixed with music (e.g. karaoke)
| Power supply: |
230 V AC, 50 Hz |
| Protection class: |
Protection class II |
| Power connection: |
Power supply cord with Euro plug (provided) |
| Frequency range: |
20 - 20000 Hz |
| S/N ratio: |
>60 dB line
>70 dB phono |
| THD: |
Line/phono <0,02 % at 1 kHz |
| Gain: |
Microphone 52 dB
Line 17 dB
Phono 53 dB |
| Housing color: |
Black |
| Zone output: |
3 adjustable zones |
| Control elements: |
Power switch, regular talkover, source selector |
| Status LED: |
Signal, chanal level meter, master level meter, peak, chanal source; CUE, Talkover, ON AIR, Routing |
| Connections: |
Input: Microphone via 2 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version)
Input: line/phono via 2 x stereo RCA
Input: line via 8 x stereo RCA
Output: master via 3 x 3-pin XLR
Output: master via 3 x stereo RCA
Output: rec. via 2 x stereo RCA
Output: headphones via 1 x 6.3-mm-jack (bal.) |
| Channels: |
Input chanel: 2 x stereo with Line-Line/Phono switch via RCA, channel control via fader, 3-band tone control EQ, Routing master bus switch, gain control, source selector, CUE switch
Input chanel: 3 x stereo with Line-line switch via RCA, channel control via fader, Routing master bus switch, gain control, source selector, CUE switch
Microphon chanal: 2 x mono via Combination socket (XLR/jack), channel control via Rotary dial, ON AIR switch, Routing master bus switch, Talkover switch,
Master output: 3 x stereo via XLR or RCA, channel control via Rotary dial, 3-band tone control EQ
Rec. output: 1 x stereo via RCA, Routing master bus switch,
Headphones output: 1 x stereo via Jack, channel control via Rotary dial, Cue-mix-function, |
| Housing design: |
(19") 48.3 cm rack installation 2 U |
| Dimensions: |
Width: 48,3 cm
Depth: 14,8 cm
Height: 8,9 cm |
| Weight: |
3,10 kg |
| The MA125 is a very compact, professional PA mixing amplifier for commercial and industrial applications. The MA125 can drive 8 Ohm or constant voltage loudspeakers. The MA125 has 4 microphone inputs with integrated speech filters, 4 selectable line inputs and one emergency line / telephone input. MIC input 1 is meant to be the main microphone paging input. Its signal can be fed via the front jack or via the XLR3, DIN5 or Euroblock connector at the back. When needed, two APart paging microphones (MIC-PAT-D) can be wired in parallel on each microphone input.
The MA125 has a 3-level priority system. The emergency line / telephone input at the back has the highest priority. MIC1 has the second priority level and the third priority level can be activated by a dry contact at the back of the amplifier. This dry contact mutes all background music inputs. It also activates the integrated chime. The level of the chime can be adjusted at the back of the amplifier. Activation of the dry contact, releases a 24V output power? this can be used to switch the relays of loudspeaker attenuators or other devices. When needed the signals mixed via your MA125 mixing amplifier can be recorded or distributed via the record output. Further the MA125 is supplied with detachable 19” brackets.
The MA125 is the device to built professional industrial applications. You can insert an extra EQ (such as the APart PXQ2215) into the signal path or add extra power amps (e.g. PA240P), using the pre-amp out / power amp in RCA connectors. |
Reviews
There are no reviews yet.