DAP AUDIO D3503 PR-52 Passive Speaker 2-Way 5.25” 50W Black (Pair)

No longer available!

81.64 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
PR-52 50W – This set contains 2 pcs. Black 2-way passive plastic vented speaker system, including mounting/hanging brackets Woofer: 5.25“, 16 Ohm, Rubber Edge Tweeter: 12,6 mm Mylar Dome Tweeter Nominal Impedance: 16 Ohm Power Handling: 50 Watt Continuous Freq. Range (-10 dB): 50 – 20.000 Hz Dimensions (LxWxH): 185 x 175 x 250 mm […]

 

Read more

PR-52
50W – This set contains 2 pcs. Black

2-way passive plastic vented speaker system,
including mounting/hanging brackets
Woofer: 5.25“, 16 Ohm, Rubber Edge
Tweeter: 12,6 mm Mylar Dome Tweeter
Nominal Impedance: 16 Ohm
Power Handling: 50 Watt Continuous
Freq. Range (-10 dB): 50 – 20.000 Hz
Dimensions (LxWxH): 185 x 175 x 250 mm
Net Weight: 2,5 kg

Weight 3.50 kg

Reviews

There are no reviews yet.

Be the first to review “DAP AUDIO D3503 PR-52 Passive Speaker 2-Way 5.25” 50W Black (Pair)”

Your email address will not be published. Required fields are marked *

Quick Comparison

DAP AUDIO D3503 PR-52 Passive Speaker 2-Way 5.25'' 50W Black (Pair) removeJBL AC 25 Passive Speaker 2-Way 450W (Black) removeDYNACORD VariLine VL62W Fullrange 2-Way Speaker 150W (White) removeLD Systems LDSAT242W G2 INSTALLATION SERIES 2 x 4" Installation Monitor Passive White 100W removeTOA SR-H3L Line Array Loudspeaker 360W (White) removeTOA F-160WP 2-Way Loudspeaker Weatherproof Speaker 30W 100V remove
NameDAP AUDIO D3503 PR-52 Passive Speaker 2-Way 5.25'' 50W Black (Pair) removeJBL AC 25 Passive Speaker 2-Way 450W (Black) removeDYNACORD VariLine VL62W Fullrange 2-Way Speaker 150W (White) removeLD Systems LDSAT242W G2 INSTALLATION SERIES 2 x 4" Installation Monitor Passive White 100W removeTOA SR-H3L Line Array Loudspeaker 360W (White) removeTOA F-160WP 2-Way Loudspeaker Weatherproof Speaker 30W 100V remove
Imagef-160wp_toa_loudspeaker
SKUD3503AC 25E009310LDSAT242WG2SR-H3LF-160WP
Rating
Price 81.64 incl. GR VAT 1,066.00 incl. GR VAT 1,399.00 incl. GR VAT 173.90 incl. GR VAT 783.00 incl. GR VAT 134.90 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

PR-52
50W - This set contains 2 pcs. Black

2-way passive plastic vented speaker system,
including mounting/hanging brackets
Woofer: 5.25“, 16 Ohm, Rubber Edge
Tweeter: 12,6 mm Mylar Dome Tweeter
Nominal Impedance: 16 Ohm
Power Handling: 50 Watt Continuous
Freq. Range (-10 dB): 50 – 20.000 Hz
Dimensions (LxWxH): 185 x 175 x 250 mm
Net Weight: 2,5 kg

Key Features:
- Ultra compact enclosure
- Dual 135 mm (5.25 in) LF transducers
- 90° x 90° waveguide with 25 mm
(1 in) dome tweeter
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility

Specifications:
System:
Frequency Range (-10 dB): 80 Hz - 20 kHz
Frequency Response (+/-3 dB): 90 Hz - 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7.5 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8.5 (avg 500 Hz - 16 kHz)
System Sensitivity1: 91 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 115 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 225 W / 450 W / 900 W
AES Standard Power Rating4: 300 W
Crossover: 3.3 kHz
Transducers:
Low Frequency Driver: 2 x JBL 225H, 135 mm (5.25 in) SFG™ driver with 38 mm (1.5 in)
edge wound voice coil
High Frequency Driver: 1 x JBL 201J, 25mm (1 in) voice coil dome tweeter
High-Frequency Waveguide: Constant Coverage 90° x 90°
Physical:
Enclosure: 12 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 4 x M8 points; 1 top, 1 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX not available for this model
Grille: Powder coated 18 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 377.8 x 150.3 x 177.8 mm
(14.9 x 5.9 x 7.0 in)
Weight: 7.5 kg (16.5 lb)

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.

Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish White 2-component paint Grille Powder coated steel, acoustic foam

LDSAT42G2 Usermaximum sound-level pressure of 108 dB. The LD SAT242G2 is rated for 100 W continuous power can can be used alone as a full-range speaker or with a subwoofer in the in the LD installation series for bass expansion.

The cabinet of the SAT242G2 is made of 12mm MDF with adurable textured finish and is available in black and white. It is connected via spring terminals. M6 inserts and an included mounting bracket provide numerous possibilities for mounting; a universal joint mount is available as an accessory.

Specifications 2 x 4" Installation Monitor Passive:
  • Components:
    • Woofer: 2 x 4" Woofer
    • Compression Driver: 1" Tweeter
  • Dispersion: 60° x 60°
  • Rated System Power (Cont./Peak): 100 W / 180 W
  • Frequency Range: 75 Hz - 20 kHz
  • SPL (1 W / 1 m): 88 dB
  • Max SPL: 108 dB
  • Impedance: 8 ohms
  • Connectors: Clamp - type
  • Cabinet Material: 12 mm MDF
  • Dimensions (W x H x D): 140 x 378 x 135 mm
  • Features: M6 rigging / mounting points, mounting brackets

The SR-H3L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.

Specification  Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360 W
Rated Impedance 8 Ω
Sensitivity 95 dB (1 W, 1 m equivalent, measured at 8 m)
Frequency Response 110 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜
Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1186.4 (H) × 115 (D) mm (3.31" × 46.71" × 4.53“)
Weight 7.6 kg (16.75 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206

  • Weatherproof 2-way bass-reflex 100V/70V constant voltage loudspeaker system.
  • Drip-proof 13cm cone woofer with 90mm magnetic circuit and 3cm film diaphragm dome tweeter with 70mm magnetic circuit.
  • High 30W rated input power and 91 dB output sound pressure level.
  • Durable, acoustically efficient polypropylene enclosure.
  • Optional wall/under-eaves mounting bracket.
Specification
Enclosure Type Bass-reflex type
Speaker Component Low Frequency; 13cm cone speaker (drip-proof)/High Frequency; 3cm dome speaker (film diaphragm)
Impedance 100V Line; 330 Ω (30W), 500 Ω (20W), 1k Ω (10W), 2k Ω (5W)/70V Line; 170 Ω (30W), 330 Ω (15W), 500 Ω (10W), 1k Ω (5W), 2k Ω (2.5W)
Rated Input Power 30W
Output Sound Pressure Level 91 dB (1W/1m)**
Crossover Frequency 4kHz (passive network)
Frequency Response 100-20,000Hz (-10dB), 150-13,000Hz (-3dB)
Input Connector Push terminal
Enclosure Material Polypropylene resin
Color Dark gray
Dimensions (W x H x D): 250 x 157 x 169mm
Weight approx. 3.9kg
** Pink noise of 330~3,300Hz
Weight3.50 kg7.50 kg10.00 kg4.80 kg7.60 kg4.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.50 kg
Weight 7.50 kg
Weight 10.00 kg
Weight 4.80 kg
Weight 7.60 kg
Weight 4.00 kg