2-way passive plastic vented speaker system,
including mounting/hanging brackets
Woofer: 5.25“, 16 Ohm, Rubber Edge
Tweeter: 12,6 mm Mylar Dome Tweeter
Nominal Impedance: 16 Ohm
Power Handling: 50 Watt Continuous
Freq. Range (-10 dB): 50 – 20.000 Hz
Dimensions (LxWxH): 185 x 175 x 250 mm
Net Weight: 2,5 kg
Weight
2.50 kg
Reviews
There are no reviews yet.
Be the first to review “DAP AUDIO D3504 PR-52 Passive Speaker 5.25” 50W White (Pair)” Cancel reply
2-way passive plastic vented speaker system,
including mounting/hanging brackets
Woofer: 5.25“, 16 Ohm, Rubber Edge
Tweeter: 12,6 mm Mylar Dome Tweeter
Nominal Impedance: 16 Ohm
Power Handling: 50 Watt Continuous
Freq. Range (-10 dB): 50 – 20.000 Hz
Dimensions (LxWxH): 185 x 175 x 250 mm
Net Weight: 2,5 kg
Specifications SR-H3S
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360W
Rated Impedance 8Ω
Sensitivity (1W,1m equivalent measured at 4m) 92dB
Frequency Response 90 – 17,000Hz (when using optional Digital processor)
Directivity Angle Horizontal: 90°, Vertical: 20° (within the range of speaker height)
Speaker Component 7cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish
Enclosure MDF, white, urethane paint
Front grille Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1177.2 (H) × 17 (D)mm (3.31" x 46.35" x 6.18“)
Weight 7.9kg (17.42 lb)
Option Extension plate: SR-EP3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Flying bracket: SR-FB3, Speaker stand adapter: SR-SA3, Speaker stand: ST-33B, Matching transformer: MT-S0301, Digital processor: DP-0206
Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.
Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish White 2-component paint Grille Powder coated steel, acoustic foam
Key Features:
- Ultra compact enclosure
- Dual 135 mm (5.25 in) LF transducers
- 90° x 90° waveguide with 25 mm
(1 in) dome tweeter
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 80 Hz - 20 kHz
Frequency Response (+/-3 dB): 90 Hz - 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7.5 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8.5 (avg 500 Hz - 16 kHz)
System Sensitivity1: 91 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 115 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 225 W / 450 W / 900 W
AES Standard Power Rating4: 300 W
Crossover: 3.3 kHz
Transducers:
Low Frequency Driver: 2 x JBL 225H, 135 mm (5.25 in) SFG™ driver with 38 mm (1.5 in)
edge wound voice coil
High Frequency Driver: 1 x JBL 201J, 25mm (1 in) voice coil dome tweeter
High-Frequency Waveguide: Constant Coverage 90° x 90°
Physical:
Enclosure: 12 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 4 x M8 points; 1 top, 1 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX not available for this model
Grille: Powder coated 18 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 377.8 x 150.3 x 177.8 mm
(14.9 x 5.9 x 7.0 in)
Weight: 7.5 kg (16.5 lb)
The cabinet of the SAT242G2 is made of 12mm MDF with adurable textured finish and is available in black and white. It is connected via spring terminals. M6 inserts and an included mounting bracket provide numerous possibilities for mounting; a universal joint mount is available as an accessory.
Specifications 2 x 4" Installation Monitor Passive:
Multi-purpose 2-way studio monitors ideally suited for fixed installation, multimedia, home recording studio, audio/video production and surround-sound systems
High power handling capability (100 W / IEC268-5) produces full-range output with extremely low distortion
Powerful 5 ½" woofer with extremely light-weight cellulose cone and high-resolution ½" tweeter
Ultra-linear frequency range from 60 Hz to 23 kHz
Phase-optimized and high-precision crossover for absolute phase linearity
Auto-overload protection prevents tweeter damage and resets automatically
Bracket for wall/ceiling mounting included
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Introducing the Stylish MONITOR 1C-BK Monitor Speakers from BEHRINGER
The MONITOR 1C-BK 2-way monitor speakers offer accurate sound reproduction combined with a great design to suit your fixed installations, stereo and surround applications, home recording studios as well as audio and video productions.
Each of these 100-Watt speakers has a powerful 5 ½" woofer with a lightweight cellulose cone, a high-resolution ½" tweeter plus a phase-optimized high-precision crossover for absolute phase linearity and auto-overload protection that resets automatically. The result: full-power, ultra-linear frequency response ranging from 60 Hz all the way up to 23 kHz. They come with convenient mounting brackets for easy installation.
Looking for great sound and style? The MONITOR 1C-BK speaker definitely got it!
SPECIFICATIONS
Connector type Clip terminal
Wire diameter
Power capacity (prg.) 100 W (IEC 268-5)
Impedance 4 Ω
Frequency range 60 Hz to 23 kHz (-10 dB)
Nominal sound pressure level (SPL) 86 dB*W/m (program, bandwidth 100 - 5000 Hz on axis, full space)
Max. short term acoustic output 112 dB @ 1m (on axis, half space)
Tweeter ½“
Woofer 5 ½“
Crossover frequency 5000 Hz
Dimensions (H x W x D) 8.9" x 5.9" x 5.6" (225 x 150 x 142 mm)
Weight approx. 4 lbs each (1.8 kg each)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.