Content | • IP 54 Protection Rate
• Multi angled Brackets
• Fast and easy installation
• High power handling
The DAP Audio EVO series loudspeaker range is designed for fixed audio installations and a wide range of applications. EVO series combines an elegant design with high fidelity audio in a wide variety of cabinet sizes. This range of 2-way cabinets are available as low impedance or with line transformer to serve both small and large installs. 100V models have an easy accessible power tap switch to select your desired power (including low impedance option) before and after installation. The included multi angled bracket offers a fast and easy installation and gives optimal orientation for both horizontal and vertical mounting. DAP audio Evo series is the perfect solution to fulfill installations in environments such as restaurants, retail stores, pubs, or even clubs thanks to their high performance components and extremely wide coverage.
Specifications
Speaker system: 2-way Full Range
Continues power: 70 Watt
Peak power: 140 Watt
Impedance: 8 Ohm
Sensitivity W/m: 90dB
LF Driver: 6,5“
HF Driver: 1" Dome Tweeter
Dispersion: 110 x90° HxV
Frequency Response: 50Hz-20.000Hz (-3dB)
Mounting: 60° Multi angled bracket
Connection: Terminals
Construction: ABS
Grill material: Steel
Dimensions: 302 x 196 x 193mm
Weight: 3,7 Kg
Approvals: CE
IP Rating: 54 |
The SR-H2L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 92 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 80 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 668.4 (H) × 115 (D) mm (3.31" × 26.31" × 4.53“)
Weight 4.4 kg (9.7 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
|
FEATURES
Compact box speakers for music and voice paging distribution
Excellent sound quality
Twelve new models:
Black or white
Indoor
Outdoor (IPX4)
Low impedance (8 ohm) or 70/100V versions
Octagonal horn design for smooth coverage
Adjustable high frequency dispersion (F-2000 models)
Extruded cabinet design improves low frequency performance
Individual protection circuit on each component
Screwdriver-adjustable power taps (70/100V models)
Paintable grille and enclosure
Wall/ceiling-mount bracket included
Optional board, cluster and pole-mount brackets
OmniMount-compatible (F-2000 models only, Series 20.5CA/WA)
Optional subwoofers, model HB-1, FB-100 or FB-120
Five year warranty
F-1300 Series
LF Driver: 5” cone woofer
HF Driver: 1” dome tweeter
Crossover: 2kHz
Power Handling: 150W (cont. PGM)
50W (pink noise)
30W (70V transformer version)
Sensitivity (1W, 1m): 90dB SPL
Dispersion: 110° H x 100 ° V
F-1300B (indoor, black, 8 ohm)
F-1300W (indoor, white, 8 ohm)
F-1300BT (indoor, black, 70V)
F-1300WT (indoor, white, 70V)
F-1300BTWP (outdoor, black, 70V)
F-1300WTWP (outdoor, white, 70V)
|
Key Features:
- Ultra compact enclosure
- Dual 135 mm (5.25 in) LF transducers
- 90° x 90° waveguide with 25 mm
(1 in) dome tweeter
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 80 Hz - 20 kHz
Frequency Response (+/-3 dB): 90 Hz - 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7.5 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8.5 (avg 500 Hz - 16 kHz)
System Sensitivity1: 91 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 115 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 225 W / 450 W / 900 W
AES Standard Power Rating4: 300 W
Crossover: 3.3 kHz
Transducers:
Low Frequency Driver: 2 x JBL 225H, 135 mm (5.25 in) SFG™ driver with 38 mm (1.5 in)
edge wound voice coil
High Frequency Driver: 1 x JBL 201J, 25mm (1 in) voice coil dome tweeter
High-Frequency Waveguide: Constant Coverage 90° x 90°
Physical:
Enclosure: 12 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 4 x M8 points; 1 top, 1 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX not available for this model
Grille: Powder coated 18 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 377.8 x 150.3 x 177.8 mm
(14.9 x 5.9 x 7.0 in)
Weight: 7.5 kg (16.5 lb)
| PRICE PER Pair
EVID 6.2EVID Seri es Twin 6" Surface Mount Speaker System
Comprised of dual 6-inch LF drivers and a 1-inch Ti/waveguide, the EVID 6.2 is
perfect for applications that require exemplary audio and the capability to fill large
areas with sound. Additionally, the flexible Strong-Arm-Mount? (SAM?) system
provides the versatility to accommodate any installation challenge. EV's unique 6-
inch dual woofer design delivers crisp and clean program for the utmost in listening
experience regardless of the location. Great for larger areas that demand higher SPL
levels, the 6.2 delivers the outstanding, full bass output required for shopping malls,
stadiums, airports, etc.
Specifications
Max. SPL / 1m (calc); full space 122 dB
System Power Handling (continuous/program/peak) 150/300/600 Watts
Coverage (nominal -6dB) H° 100 °
Coverage (nominal -6dB) V° 80 °
Nominal Impedance 8 Ohms
Minimum Impedance 6 Ohms
Frequency Response (-10dB) 62 - 20000 Hz
Input Connections Spring Terminal
Sensitivity 1W/1m 94 dB
Transformer Taps (Transformer Version Only) 70V/100V:15W, 30W, 60W
Chassis Size 6 inches
Weight Net 5.3 kg ( 11.68 lbs )
Dimensions (HxWxD) 419 x 228 x 298 mm
(16.5" x 8.98" x 11.73“) |
The AC15 is an ultra-compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive. The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting. The high frequency device is a 1" dome tweeter integrated
into a 90° x 90° waveguide that provides even coverage throughout the intended usage area. The AC15 utilizes a 5.25" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 1.5" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket. The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.
Features:
1" Dome Tweeter with 90° x 90° Coverage.
5.25" (135 mm) LF transducer
Ultra compact enclosure
300W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket
Specifications:
Frequency Range (-10 dB): 80 Hz -20 kHz
Frequency Response (±3 dB): 90 Hz -18 kHz
Power Rating:
150W Cont. Pink Noise
300W Program
600W Peak
Impedance: 16 Ohms
Coverage Pattern: 90° x 90°
Dimensions: 9.5" H x 5.9" W x 7" D (241.3 x150.3 x 177.8mm)
Weight: 10.5 lbs. (4.7 kg)
|
Reviews
There are no reviews yet.