D4176_MANUAL_GB_V1.pdf HP-900 • Full protection circuits• Efficient forced air cooling• Stereo & Bridge mode The DAP HP Series power amplifiers are the solution when true quality is needed in an affordable price range. The HP Series are 5 models representing output powers from stereo 200W until 1400W. All including the best protection circuits and built […]
• Full protection circuits • Efficient forced air cooling • Stereo & Bridge mode
The DAP HP Series power amplifiers are the solution when true quality is needed in an affordable price range. The HP Series are 5 models representing output powers from stereo 200W until 1400W. All including the best protection circuits and built in a strong solid housing to achieve many years of reliable power. They are the best mobile choice for musicians, DJs, and entertainers but also perfect for installations in discos, pubs or any kind of public areas.
The HP Series power amplifiers by DAP Audio are the obvious choice for musicians, DJs, and entertainers and also perfectly suited for permanent installation in discos, pubs or public areas. The DAP Audio HP Series includes five power-amp models with outputs ranging from 200W to 1400W RMS stereo at 4 Ohms. The solid yet fashionable housings all hold forced air-cooling systems and the best protection circuits, ensuring many years of reliable amplification.
The HP-500 and HP-900 are ideal for pubs, bars, and parties. These class AB power amps deliver enough output to make everyone sing along and dance to their favorite tunes.
These amplifiers truly are the best choice wherever quality and reliability at affordable prices are required.
SPECIFICATIONS
Output Power Stereo 2Ohm: Not Allowed Stereo 4Ohm: 2x 450 Watt RMS Stereo 8Ohm: 2x 350 Watt RMS Bridge 2Ohm: Not Allowed Bridge 4Ohm: Not Allowed Bridge 8Ohm: 1×900 Watt RMS Frequency Response: 10Hz – 20KHz, +/-1dB THD: 100dB A-weighted Crosstalk: >75dB Damping Factor: >100 8 OHM Gain: 32dB Input Sensitivity: 0,85V (+/-1dBv) Input Impedance: 20kOhm balanced, 10kOhm unbalanced Output Mode: Stereo / Parallel / Bridge Amp Technology: Class AB Protection: Clip Limiter (Fixed) Short Circuit Overheat Overload DC Voltage Cooling: Forced-air by axial fan Airflow: Front to side Input Connectors: 3-pin XLR Output Connectors: Speakon Power Connector: IEC Input Voltage: 210~240VAC, 50/60Hz Dimensions: 483 x 310 x 88mm Weight: 10Kg
Weight
10.00 kg
Reviews
There are no reviews yet.
Be the first to review “DAP AUDIO D4176 HP-900 2x450W Amplifier” Cancel reply
• Full protection circuits • Efficient forced air cooling • Stereo & Bridge mode
The DAP HP Series power amplifiers are the solution when true quality is needed in an affordable price range. The HP Series are 5 models representing output powers from stereo 200W until 1400W. All including the best protection circuits and built in a strong solid housing to achieve many years of reliable power. They are the best mobile choice for musicians, DJs, and entertainers but also perfect for installations in discos, pubs or any kind of public areas.
The HP Series power amplifiers by DAP Audio are the obvious choice for musicians, DJs, and entertainers and also perfectly suited for permanent installation in discos, pubs or public areas. The DAP Audio HP Series includes five power-amp models with outputs ranging from 200W to 1400W RMS stereo at 4 Ohms. The solid yet fashionable housings all hold forced air-cooling systems and the best protection circuits, ensuring many years of reliable amplification.
The HP-500 and HP-900 are ideal for pubs, bars, and parties. These class AB power amps deliver enough output to make everyone sing along and dance to their favorite tunes.
These amplifiers truly are the best choice wherever quality and reliability at affordable prices are required.
SPECIFICATIONS
Output Power Stereo 2Ohm: Not Allowed Stereo 4Ohm: 2x 450 Watt RMS Stereo 8Ohm: 2x 350 Watt RMS Bridge 2Ohm: Not Allowed Bridge 4Ohm: Not Allowed Bridge 8Ohm: 1x900 Watt RMS Frequency Response: 10Hz - 20KHz, +/-1dB THD: 100dB A-weighted Crosstalk: >75dB Damping Factor: >100 8 OHM Gain: 32dB Input Sensitivity: 0,85V (+/-1dBv) Input Impedance: 20kOhm balanced, 10kOhm unbalanced Output Mode: Stereo / Parallel / Bridge Amp Technology: Class AB Protection: Clip Limiter (Fixed) Short Circuit Overheat Overload DC Voltage Cooling: Forced-air by axial fan Airflow: Front to side Input Connectors: 3-pin XLR Output Connectors: Speakon Power Connector: IEC Input Voltage: 210~240VAC, 50/60Hz Dimensions: 483 x 310 x 88mm Weight: 10Kg
BASIC Series - Intelligent Power
BASIC - that's meeting the tightest budgets and professional requirements in reliability, flexibility and sound. Alone or in combination with the other products of the Bittner portfolio. The consequent realisation of the Bittner quality standards indicates once more our understanding of the contracting business. It underlines our philosophy that cost consciousness has nothing to do with giving up standards. Compromise is a word unknown to Bittner Audio! The incorporation of detent potentiometers, clip limiter, protection circuits for any imaginable situation, as well as a first-class production process using only highest-quality components made the BASIC series the choice of most contractors.
Certainly more than basic!
High Tech SMT design Excellent sound and superior impulse response Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay XLR Inputs Speakon and Binding Posts Clip Limiter Toroidal transformers LED Indicators for SIGNAL, CLIP, PROTECT, POWER Temperature controlled, variable speed, low noise fans Detent potentiometers Stereo / Bridged / Parallel Mode Ground Lift Robust Steel Chassis 3 Year Warranty
TECHNICAL DATA: Basic 200: 2x 100 W @ 4 Ohm Class: AB Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB) THD: < 0.03% Signal-to-Noise Ratio: < -102 dB Channel Seperation: > 85 dB Input Sensitivity: +6 dBu Input Clipping: 22 dBu Input Impedance: 20 kOhm Damping Factor: > 400 @ 4 Ohm Cooling: 2x Fan (temp. reg. variable speed) Weight: 10 kg. Dimensions : 2 RU/483x89x265 mm (19" x 3.5" x 12.6“)
L1400 450W-450W 4ohm (280W-280W8ohm)
COMPACT MODERN DESIGN
Compact size (2U-Rack Height) with up to 1200W per channel@2ohms
these amps save valuable rack space without compromising power output.
HIGH CURRENT TOROIDAL TRANSFORMER
A high-current toroidal transformer saves rack space
and minimizes hum and noise.
EXCELLENT SOUND QUALITY
The low T.H.D.(0.05%) and high damping factor (400 or higher)
gives excellent sound quality.
2 STAGE POWER SUPPLY
The high-power units (L1800 and L2400) have a 2-Stage Class-H design
that maximizes their performance.
EQUIPPED WITH 30Hz or 50Hz HPF
All amplifiers are equipped with high-pass filters on each channel to
help maintain sound quality, yet help protect the loudspeakers.
EXTENSIVE PROTECTION CIRCUITS
Extensive protection circuits monitor over voltage/current conditions, overheating,
output shorts, and DC voltage to improve performance and reliability.
CLIP-LIMITER CIRCUITS
Clip-limiters on each channel are provided to help prevent
distortion due to excessive signal levels.
L.E.D FUNCTION DISPLAYS
Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged)
LEDs on the front panel indicate the status of the unit in operation.
2Χ350W 8Ω 2x500W 4Ω 2x650W STEREO MODE
BRIDGE 2000W 4 Ω
16Kg
2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)
Precise Power, Signal and Clip LEDs to monitor performance
XLR and 1/4" TRS input connectors for compatibility with any source
Professional speaker connectors and "touch-proof” binding posts support most speaker wiring systems
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Solid DYNACORD technology for fixed installations at very competitive prices. DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.