DAP AUDIO D4177 HP-1500 2x750W Amplifier

D4177_MANUAL_GB_V1.pdf

• Full protection circuits
• Efficient forced air cooling
• Stereo & Bridge mode

The DAP HP Series power amplifiers are the solution when true quality is needed in an affordable price range. The HP Series are 5 models representing output powers from stereo 200W until 1400W. All including the best protection circuits and built in a strong solid housing to achieve many years of reliable power. They are the best mobile choice  for musicians, DJs, and entertainers but also perfect for installations in discos, pubs or any kind of public areas.

The HP Series power amplifiers by DAP Audio are the obvious choice for musicians, DJs, and entertainers and also perfectly suited for permanent installation in discos, pubs or public areas.
The DAP Audio HP Series includes five power-amp models with outputs ranging from 200W to 1400W RMS stereo at 4 Ohms. The solid yet fashionable housings all hold forced air-cooling systems and the best protection circuits, ensuring many years of reliable amplification.

The HP-1500 and HP-2100 are the mid-range of the DAP Audio HP power amplifier series and are ideal for medium-sized events and clubs. Both with sufficient output to provide the audience with powerful basses and impressive highs.

These amplifiers truly are the best choice wherever quality and reliability at affordable prices are required. 

Output Power
Stereo 2Ohm: Not Allowed
Stereo 4Ohm: 2x 750 Watt RMS
Stereo 8Ohm: 2x 500 Watt RMS
Bridge 2Ohm: Not Allowed
Bridge 4Ohm: Not Allowed
Bridge 8Ohm: 1x1500 Watt RMS
Frequency Response: 10Hz - 20KHz, +/-1dB
THD: 100dB A-weighted
Crosstalk: >75dB
Damping Factor: >250 8 OHM
Gain: 34.5dB
Input Sensitivity: 0,775V (+/-1dBv)
Input Impedance: 20kOhm balanced, 10kOhm unbalanced
Output Mode: Stereo / Parallel / Bridge
Amp Technology: Class H
Protection: Clip Limiter (Fixed)
Short Circuit
Overheat
Overload
DC Voltage
Cooling: Forced-air by axial fan
Airflow: Front to side
Input Connectors: 3-pin XLR
Output Connectors: Speakon
Power Connector: IEC
Input Voltage: 210~240VAC, 50/60Hz
Dimensions: 483 x 360 x 88mm
Weight: 13 Kg

Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

HPS 2500 is a 2 channel power amplifier that delivers up to 2 x 1400 W RMS @ 2 Ω (2800 W RMS bridged @ 4 Ω).

XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.
A forced air cooling system maintains a low operating temperature.

Number of Channels: 2

Output Power: (per channel)

8 ohms 625W
4 ohms 1150W
2 ohms 2100w


Output Power: (bridged)

8 ohms 2300W
4 ohms 4200w


THD%: (@1dB below max output)

@ 1kHz 20Hz to 20kHz
Gain / Sensitivity:

Gain 32/36dB
Sensitivity (for max power) +7.5/3.5dBu (1.8/1.2V)


Frequency Response: 20Hz to 20kHz (+ 0/- 0.5dB)

Power Consumption:

Nominal @ 240v into 4 ohms 2.8A
Nominal @ 120v into 4 ohms 5.6A

Dimensions: (2U) (mm)

Amplifier 88(h) x 482(w) x 460(d)
Single Box (UK shipping) 230 x 580 x 560
Double Box (outside UK) 250 x 610 x 600

Weight:

Amplifier 20.4kg
Boxed (shipping weight) 22.2kg

User's Manual