DAP AUDIO D4530 Qi-4200 4 Channel installation amp 4x200W

520.79 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The Qi-amplifier range is developed for installation use to create a perfect match with the Xi installation speaker range. Due to the rugged steel housing it can also be applied for mobile use. With only 1U it gives power for 4 channels. All 4 channels are individual controllable and bridge mode can be set for […]

 

Read more

The Qi-amplifier range is developed for installation use to create a perfect match with the Xi installation speaker range. Due to the rugged steel housing it can also be applied for mobile use. With only 1U it gives power for 4 channels. All 4 channels are individual controllable and bridge mode can be set for each stereo pair. With the SMPS and Class-D amplification it is a light weight solution with a high efficiency power consumption / power output ratio. An advanced protection circuit will protect the amplifier and it’s connected speakers. It has a short circuit/ thermal, DC ,RF protection and a soft start system. The Qi-amplifiers are made with high-quality low deviation components to ensure a perfect sound quality and a long life time.

Specifications

Output power
Stereo 4Ohm: 4x 200W
Stereo 8Ohm: 4x 120W
Bridge 8Ohm: 2x 400W
Parameters
S/N Ratio: >90dB
Input sensitivity: 0,65V
Input impedance: 20kOhm Bal./10Kohm unbal.
Technology: Class-D
Protection: short circuit, DC, RF, Soft start
Cooling: Temp controlled fan
Power supply: SMPS

Connections
Input: 4x XLR
Output: 4x Speaker connector
Power: IEC

Physical
Dimensions: 388 x 435 x 44 (WxHxD)
Installation depth: 370 (excl. conn.)
Weight: 5.8Kg

Electrical
Input Voltage: 100~240VAC…50/60Hz
Power consumption: 500W

 

Weight 6.00 kg

Reviews

There are no reviews yet.

Be the first to review “DAP AUDIO D4530 Qi-4200 4 Channel installation amp 4x200W”

Your email address will not be published. Required fields are marked *

Quick Comparison

DAP AUDIO D4530 Qi-4200 4 Channel installation amp 4x200W removeCROWN CT-475 POWER POWER AMPLIFIER 4X75W removeINTERM QD-4240 AMPLIFIER 4X60W removeRAM AUDIO T-2408 Power Amplifier 8x300 Watts removeINTER-M SP-100 SYSTEM DIGITAL AMPLIFIER 60W 6 Channel removeINTERM QD-4960 4Channel AMPLIFIER 4X240W 4 OHM remove
NameDAP AUDIO D4530 Qi-4200 4 Channel installation amp 4x200W removeCROWN CT-475 POWER POWER AMPLIFIER 4X75W removeINTERM QD-4240 AMPLIFIER 4X60W removeRAM AUDIO T-2408 Power Amplifier 8x300 Watts removeINTER-M SP-100 SYSTEM DIGITAL AMPLIFIER 60W 6 Channel removeINTERM QD-4960 4Channel AMPLIFIER 4X240W 4 OHM remove
Imageinter-m sp-100 digital amplifier 6ch 60w
SKUD4530CT-475QD-4240T-2408SP-100QD-4960
Rating
Price 520.79 incl. GR VAT 1,160.00 incl. GR VAT 717.00 incl. GR VAT 1,488.00 incl. GR VAT 573.29 incl. GR VAT 1,075.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Available on backorder

In stock

Only 1 left in stock

AvailabilityAvailable on backorderAvailable on backorderIn stockAvailable on backorderIn stockOnly 1 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe Qi-amplifier range is developed for installation use to create a perfect match with the Xi installation speaker range. Due to the rugged steel housing it can also be applied for mobile use. With only 1U it gives power for 4 channels. All 4 channels are individual controllable and bridge mode can be set for each stereo pair. With the SMPS and Class-D amplification it is a light weight solution with a high efficiency power consumption / power output ratio. An advanced protection circuit will protect the amplifier and it's connected speakers. It has a short circuit/ thermal, DC ,RF protection and a soft start system. The Qi-amplifiers are made with high-quality low deviation components to ensure a perfect sound quality and a long life time. Specifications Output power Stereo 4Ohm: 4x 200W Stereo 8Ohm: 4x 120W Bridge 8Ohm: 2x 400W Parameters S/N Ratio: >90dB Input sensitivity: 0,65V Input impedance: 20kOhm Bal./10Kohm unbal. Technology: Class-D Protection: short circuit, DC, RF, Soft start Cooling: Temp controlled fan Power supply: SMPS Connections Input: 4x XLR Output: 4x Speaker connector Power: IEC Physical Dimensions: 388 x 435 x 44 (WxHxD) Installation depth: 370 (excl. conn.) Weight: 5.8Kg Electrical Input Voltage: 100~240VAC...50/60Hz Power consumption: 500W  

Model    CT475
Product Type    Amplifier
Channels    4
Sensitivity    1.4V
Rated Power Output    75W per Channel into 8 ohms
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted    110dB
Total Harmonic Distortion (THD) (full rated power, 20Hz - 20kHz)    Intermodular Distortion (from 0dB down to -40dB)    Frequency Response (at 1W into 4/8 ohms)    ± 0.5dB
Crosstalk (below rated power 20Hz to 1kHz)    > 70dB
Common Mode Rejection (20Hz to 1kHz)    > 55dB, typically > 70dB
Dimension (H x W x D)    1.75" x 19" x 14.25“
Weight    10 lbs (4.5 kg)


Power Output Level: QD4240                     

8ohm (Quad Ch)      40W     
4ohm (Quad Ch)      60W                                                          

8ohm bridged mono 120W

Input Sensitivity (8ohm, 1kHz)  0.775Vrms
Input Impedance 20kohm Balanced 
Slew Rate (8ohm, Full Swing) ±30V/?sec
Frequency Response (±0.5dB) 20kHz ~ 50kHz 
T.H.D. (f=20Hz~20kHz, Half Power) 0.03% 
Signal to Noise Ratio 105dB
Damping Factor (8ohm, 1kHz)  100
Rasidual Noise  -85dB
Channel Separation (8ohm, 1kHz)  80dB
Voltage Gain (4ohm)  26dB 29dB 32dB
Power Source  100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
Power Consumption  300W 420W 770W
Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb
Dimensions  482(W) x 88(H) x 369(D) mm
/19(W) x 3.5(H) x 14.5(D) in

• Eight and four channel models with 300W and 150W per channel
• Minimal footprint and mass arround 200mm depth and 6 Kg
• Optional Add-on card to interface with third party alarm systems with GPIO connections
• FCM™ Faulty Channel Management system to avoid entire device shutdown
• State-of-the-art layout for maximum performance and reliability
• Highly oversized thermal dissipation design for maximum reliability
• Superb distortion and noise figures
• All channels bridgeable by pairs
• Selectable gain in four channel groups (26, 32 and 38dB)
• Subsonic filter per channel (35Hz user selectable)
• Temperature and signal dependant, intelligent cooling system for minimal
noise
• Optimal heat extraction due to the air tunneled enclosure and insulator-less
power device attachment to the heatsink
• Direct connector-less output for maximum quality loudspeaker control
• High grade engineering inside with the latest SMD technology
• Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection
• Critical electronic and mechanical parts selection
• Innovative protection systems, FCM™ Faulty Channel Management and SSP™
SOA Sentry Protection
• Detented and optionally tamper-proof volume potentiometers
• Hi efficiency, two steps Class H Audio topology
• Protection, Signal and Clip indicators per channel
• Power On and Standby general indicators
• Extremely compact, fully featured QuantaPulse Power supply
• Low current consumption and heat generation allowing less demanding
conditions for multiple amplifier installations
• Factory preset worldwide mains voltage power supply
• Laser cut four milimeters aluminium front panel
• Rugged 2U steel chasis

 

  OUTPUT POWER T-604 T-1204 T-1208 T-2408
RMS, 1kHz, 1.0% THD+N        
4 ohms 4x 160 W 4x 320 W 8x 150 W 8x 300 W
8 ohms 4x 115 W 4x 220 W 8x 100 W 8x 195 W
Bridge @ 8ohms 2x 320 W 2x 640 W 4x 300 W 4x 600 W
Pink Noise 12dB CF        
4 ohms 4x 210 W 4x 415 W 8x 180 W 8x 370 W

Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz

Phase Response (@1W 20Hz-20kHz): ±15deg

Total Harmonic Distortion (20Hz-20kHz):
Intermodulation Distortion (SMPTE):
Crosstalk (20Hz-20kHz): >70dB

Voltage Gain (selectable): 26/32/38 dB

Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V

Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB

Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A

Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches

Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs

Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™

- 6CH 60W DIGITAL AMPLIFIER - LIGHT WEIGHT - 6 BUS BROADCASTING FUNCTION WITH A UTP (CATEGORY 5) CABLE. - VOLUME AND 5 BAND EQ TUNING FUNCTION BY CHANNEL - AMP ID AUTO/MANUAL ALLOCATION FUNCTION - SELF-BROADCASTING FUNCTION USING A LOCAL INPUT - INTERFACE FUNCTION WITH OTHER EQUIPMENT USING A CONTROL INPUT/OUTPUT CONTACT
  • Manufacturer: INTER-M
  • Category: AMPLIFIERS
  • Use: POWER AMPLIFIERS 100V
  • Measurement Unit: Attribute34381
  • Warranty Months: 12
  • Depth (cm): 38.0
  • AC Line Voltage and Frequency Configurations Available: 220-240VAC DC24V
  • Height (cm): 8.8
  • Weight (Kg): 13.0
  • Order Quantity: 1
  • Power Output: 60
  • Rack Installation Possible: Yes
  • Channels: 6
  • Power Output W/4Ω: 60
  • Frequency Response (at 1W, 4/8Ω) (dB) ±: 80Hz-20KHz
  • Catalog: Professional
  • Amplifier Type: Power Amplifier
  • Load Impedance: Ohm
  • Group: Attribute49042, Attribute50583
  • Width (cm): 48.2
Power Output Level QD4960 : 8ohm (Quad Ch)        170W 4ohm (Quad Ch)        240W 8ohm bridged mono   480W Input Sensitivity (8ohm, 1kHz)  0.775Vrms Input Impedance 20kohm Balanced Slew Rate (8ohm, Full Swing) ±30V/?sec Frequency Response (±0.5dB) 20kHz ~ 50kHz T.H.D. (f=20Hz~20kHz, Half Power) 0.03% Signal to Noise Ratio 105dB Damping Factor (8ohm, 1kHz)  100 Rasidual Noise  -85dB Channel Separation (8ohm, 1kHz)  80dB Voltage Gain (4ohm)  26dB 29dB 32dB Power Source  100-120VAC or 220-240VAC ; 50/60Hz (supplied AC mains transformer depends on country requirements) Power Consumption  300W 420W 770W Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb Dimensions  482(W) x 88(H) x 369(D) mm /19(W) x 3.5(H) x 14.5(D) in
Weight6.00 kg4.50 kg11.50 kg6.20 kg13.00 kg17.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.00 kg
Weight 4.50 kg
Weight 11.50 kg
Weight 6.20 kg
Weight 13.00 kg
Weight 17.00 kg