| Content |
• Mic- volume adjustable on backside
• Chime volume adjustable on backside
• Talk button on upside
• Build-in four tone Chime
The PM-160 announcement microphone is designed to be connected directly to a amplifier input ore a mixer input. The unit features a clear sound and low feedback sensibility.
Specifications
Microphone unit: Condenser
Freq response: 22 Hz – 23 KHz
Sensitivity: 29dB @ 1kHz
Balanced output: 230mV
Unbalanced output: 110mV
Dimensions: 132x155x380mm
Weight: 0,7Kg
|
t is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in-line or plate mount preamps, MX202 Microflex® Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.
Cartridge polar pattern indicated by model number suffix:
C = Cardioid, S = Supercardioid, N = No cartridge
Available Options
MX202B/C Black mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapter
MX202B/S Black mini-condenser Supercardioid mic, w/cable, in-line preamp, stand adapter
MX202W/C White mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapter
MX202W/S White mini-condenser Supercardioid mic, w/cable, in-line preamp, stand adapter
MX202W/N White mini-condenser mic, w/cable, in-line preamp, stand adapter, No Cartridge
MX202BP/C Black mini-condenser Cardioid mic; includes cable and plate-mounted preamplifier
MX202BP/S Black mini-condenser Supercardioid mic; includes cable and plate-mounted preamplifier
MX202BP/N Black mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge
MX202WP/C White mini-condenser Cardioid mic; includes cable and plate-mounted preamplifier.
MX202WP/S White mini-condenser Supercardioid mic; includes cable and plate-mounted preamplifier.
MX202WP/N White mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge |
Designed to operate exclusively with the PAM-340A the RM-05A will allow either individual selection of any combination of paging zones or the all-all facility. A flexible gooseneck microphone is supplied together with a three metre lead, complete with multiway connectors to connect the RM-05A to the host amplifier. Power: Supplied by the host PAM-340A. Dimensions: 195mm(w) x 60mm(h) x 205mm(d). Weight: 1.2 kg including microphone. | MASTER AUDIO – CM238
Pen-type microphone
- Directivity: condenser – ultra cardioid
- Frequency response.: 100Hz – 16Khz
- Sensitivity: -44db +/- 2db for short distance – -23db +/- 2db for long distance
- Output impedance: 1K Ohm for short distance – 2.3K Ohm for long distance
- Power supply: 1.5V / phanthom 48V
- Dimensions: Ø 23 x 360 mm.
- Windscreen, microphone holder and cable (4,5 m.) included
|
Shure MX202B-C Microflex Overhead Cardioid Condencer Microphone
It is hard to believe that such small, unobtrusive microphones can produce such great sound,
but it's true. Available in black or white finishes, and with in line or plate mount preamps, the
Microflex? Overhead condenser microphones capture Shure quality sound in a compact, adjustable
package. Each model features a choice of interchangeable cardioid, supercardioid and omnidirectional
condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.
The preamp options available offer easy installation in ceilings or microphone stands, and when combined
with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound
reproduction with a minimum of RF interference or electromagnetic hum.
Features:
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal polar pattern choice for each application
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
White or black finish that blends unobtrusively with most surroundings
Frequency Response
50 to 17,000 Hz
Output Impedance
180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*)
Cardioid: -35.0 dBV/Pa (17.8 mV)
Supercardioid: -33.5 dBV/Pa (21.1 mV)
Omnidirectional: -27.5 dBV/Pa (42.2 mV)
All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
Cardioid: 124.2 dB
Supercardioid: 122.7 dB
Omnidirectional: 116.7 dB
All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted)
Cardioid: 28.0 dB SPL
Supercardioid: 26.5 dB SPL
Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL)
Cardioid: 66.0 dB
Supercardioid: 67.5 dB
Omnidirectional: 73.5 dB
Dynamic Range at 1 k ohm load
96.2 dB
100 dB at 0 gain
Common Mode Rejection
45.0 dB minimum
Preamplifier Output Clipping Level (1% THD)
-6.0 dBV (0.5 V)
-12 dBV at 0 gain
Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements
11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements
Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
Relative Humidity: 0 to 95% |
Designed for paging calls and general announcements, the PM-660D desk-top microphone comes with a large talk switch and a lock lever for easy and convenient operation. Its robust anti-vibration construction and balanced output render the microphone resistive to noise. In addition, the PM-660U microphone is equipped with a remote control switch (interlocked with the talk switch) for amplifier power on/off operation or chime activation.
| Type | Moving coil microphone | | Polar Pattern | Unidirectional | | Rated Impedance | 600 Ω, Balanced | | Rated Sensitivity | -58 dB (1 kHz, 0 dB=1 V/Pa) | | Frequency Response | 100 - 10,000 Hz | | Output | φ5.0 (φ0.2) | | Talk Switch | 1-push-to-talk switch, 1-locking lever, Short-off type | | Remote Control | 500 mA or less at 30 V DC | | Finish | Microphone head: Zinc plated steel wire, gray baked paint
Main unit: ABS resin, gray | | Dimensions | 100 (W) × 215 (H) × 150 (D) mm (3.94 × 8.46" × 5.91“)“ | | Weight | 440 g (0.97 lb) (cord excluded) | ※ Do not keep the lock lever placed in the locked state (ON position) for a long period of time.Doing so may cause poor conductivity in the lever switch due to deterioration with age, resulting in unit malfunction.
|
Reviews
There are no reviews yet.