| Content |
• Mic- volume adjustable on backside
• Chime volume adjustable on backside
• Talk button on upside
• Build-in four tone Chime
The PM-160 announcement microphone is designed to be connected directly to a amplifier input ore a mixer input. The unit features a clear sound and low feedback sensibility.
Specifications
Microphone unit: Condenser
Freq response: 22 Hz – 23 KHz
Sensitivity: 29dB @ 1kHz
Balanced output: 230mV
Unbalanced output: 110mV
Dimensions: 132x155x380mm
Weight: 0,7Kg
|
- Unidirectional Dynamic Microphone
- Remote Chime Switch
- Mic ON/OFF Switch
- 2 Push Buttons for Easy Operation
| | | |
|
RM-01
| | Input Sensitivity / Impedance |
75dB±3dB (0dB=1V/µber at 1,000Hz), 600ohm
| | Frequency Response |
100Hz~18kHz
| | Type |
Moving Coil Dynamic
| | Directional Characteristic |
Unidirectional
| | Weight |
3lbs.
1.4kg
| | Dimensions |
3.5(W) X 1.8(H) X 5.2(D) inches
90(W) x 45(H) x 133(D) mm
| |
*Specifications and design subject to change without notice for improvements.
| |
|
The APM series are digital paging microphones equipped with a condenser microphone with cardiologic characteristics, mounted on a 30 cm long gooseneck. By means of a built-in compressor / limiter, the output level of the microphone signal is constantly maintained. The status of the reproduced signal is indicated on the front panel, to ensure the speaker that the message is clear and audible in all situations. Each console has 3 standard buttons (except the APM01 which has only PTT) with pre assigned functions: PTT (Push To Talk), Select all and Clear. All other buttons can be freely programmed, using the free APM configuration software. |
Professional table microphone, high sensitivity condenser microphone capsule, flexible gooseneck, illuminated ring to indicate operating condition, and on/off switch.
Perfect for all PA applications, such as conference and paging. It can be powered by battery or as by Phantom power. The base is equipped with 8 meters of cable XLRF-XLRM and XLRF-mono jack adapter.
|
t is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in-line or plate mount preamps, MX202 Microflex® Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.
Cartridge polar pattern indicated by model number suffix:
C = Cardioid, S = Supercardioid, N = No cartridge
Available Options
MX202B/C Black mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapter
MX202B/S Black mini-condenser Supercardioid mic, w/cable, in-line preamp, stand adapter
MX202W/C White mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapter
MX202W/S White mini-condenser Supercardioid mic, w/cable, in-line preamp, stand adapter
MX202W/N White mini-condenser mic, w/cable, in-line preamp, stand adapter, No Cartridge
MX202BP/C Black mini-condenser Cardioid mic; includes cable and plate-mounted preamplifier
MX202BP/S Black mini-condenser Supercardioid mic; includes cable and plate-mounted preamplifier
MX202BP/N Black mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge
MX202WP/C White mini-condenser Cardioid mic; includes cable and plate-mounted preamplifier.
MX202WP/S White mini-condenser Supercardioid mic; includes cable and plate-mounted preamplifier.
MX202WP/N White mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge |
Unidirectional cardoid-pattern microphone with high sensitivity and extended frequency response.
Factory-fitted for direct connection to the AM4000 series, PR4092, EL2126 CD sintoamplifier and 1000 series amplifiers.
General Specs
- Plastic body with 320 mm gooseneck
- Pushbutton for momentary microphone activation
- Connections on screw terminals inside
Specifications
- Type:Desktop paging microphone with dinamyc capsule
- Directivity:Unidirectional - Cardioid
- Frequency Response:100Hz ÷ 12 kHz
- Microphone Sensitivity:- 71 dB ± 3
- Output impedance:500Ω
- Signal/noise ratio:40dB
- Connector:3 pole XLR
Size/Weight
- Height:270 / 10.62mm/inch
- Width:200 / 7.87mm/inch
- Depth:132 / 5.20mm/inch
- Net Weight:6 / 3.53kg/lbs
|
Reviews
There are no reviews yet.