Content | 1 LAST PIECE ON STOCK
15W/20W 100V Projectors. Uni directional sound projectors with a position selector for adjusting the sound power. They are recommended for music or speech reproduction and suitable for public addressing. Weather-proof and suitable for indoor and outdoor use.
Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: One 5.5" paper/
plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V 666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz 94dB (1W/M)
Material: ABS resin |
PRICE IS PER PIECE AND NOT PER PAIR!
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
F-1000BTWP: 100V weather proof line full range speaker
Weather Proof version of the F-1000BT
IPX4 Water rated
Specification | Model F-100BTWP | Enclosure Type | Bass-reflex type | Rated Input | 15W | Impedance | 100V line 670Ω(14W), 2kΩ(5W),33kΩ(3W),10kΩ(1W) | Sensitivity | 87dB (1w,1m) | Frequency Responce | 85-20,000Hz | Crossover Frequency | 5kHz | Directivity Angle | Horizontal 90°, vertical 90° | Speaker Componenrs | Low frequency 10 cm cone type. High Frequency, Balanced dome tweeter | Input Terminals | Push-in terminal | Finish | HIPS, black | Dimensions | 130(W) × 202(H) × 131(D)mm | Weight | 2 kg (3.97 lb) (including the supplied brackets) | Accessories | Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set, Terminal covers x 1, Terminal cover mounting screws. |
|
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
SPECIFICATIONS |
| BS-633A | | Rated Input: | 6W (100V line), 3W (70V line) | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ(1W) | Sensitivity | (1W, 1m): 91dB | Frequency Response: | 120 – 15,000Hz (–20dB) | Speaker Component: | 5" (12cm) cone-type | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | Connetion: | Push-in connector (bridging terminal) | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | Finish: | Case: ABS resin, off-white | Rear bord: | Hard board | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) | Wall Mounting Case front mount: | 184mm (7.24“) | Dimensions: | Fixing hole mount: 120mm (4.72“) | Weight: | 780g (1.72 lb) | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16(0.16" x 0.63“)) × 2 |
|
FEATURES
Compact box speakers for music and voice paging distribution
Excellent sound quality
Twelve new models:
Black or white
Indoor
Outdoor (IPX4)
Low impedance (8 ohm) or 70/100V versions
Octagonal horn design for smooth coverage
Adjustable high frequency dispersion (F-2000 models)
Extruded cabinet design improves low frequency performance
Individual protection circuit on each component
Screwdriver-adjustable power taps (70/100V models)
Paintable grille and enclosure
Wall/ceiling-mount bracket included
Optional board, cluster and pole-mount brackets
OmniMount-compatible (F-2000 models only, Series 20.5CA/WA)
Optional subwoofers, model HB-1, FB-100 or FB-120
Five year warranty
F-1300 Series
LF Driver: 5” cone woofer
HF Driver: 1” dome tweeter
Crossover: 2kHz
Power Handling: 150W (cont. PGM)
50W (pink noise)
30W (70V transformer version)
Sensitivity (1W, 1m): 90dB SPL
Dispersion: 110° H x 100 ° V
F-1300B (indoor, black, 8 ohm)
F-1300W (indoor, white, 8 ohm)
F-1300BT (indoor, black, 70V)
F-1300WT (indoor, white, 70V)
F-1300BTWP (outdoor, black, 70V)
F-1300WTWP (outdoor, white, 70V)
|
100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.
Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: Two 5.5" paper
/plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 K Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V-666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz
S.P.L: 94 dB (1W/M)
Material: ABS resin
|
Reviews
There are no reviews yet.