DAP AUDIO D6322 PST-215 Bi Direction Projector Speaker 15W incl.100V Line Transformer

64.45 incl. GR VAT

Only 2 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.   Technical Info Input power: RMS 15W Output power: 3.75, 7.5, 15W […]

 

Read more

100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.

 

Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: Two 5.5″ paper
/plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 K Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V-666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz
S.P.L: 94 dB (1W/M)
Material: ABS resin

 

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “DAP AUDIO D6322 PST-215 Bi Direction Projector Speaker 15W incl.100V Line Transformer”

Your email address will not be published. Required fields are marked *

Quick Comparison

DAP AUDIO D6322 PST-215 Bi Direction Projector Speaker 15W incl.100V Line Transformer removeTOA BS-1034S 10W Wall-Mount Speaker removeTOA BS-633AT Wall mount speaker removeJBL CONTROL 25AV - 5.25'' 2-way Monitor Speaker 120W (Black) removeTOA F-1000BTWP 100V weather proof line full range speaker removeTOA F-1300BTWP/WTWP Installation Speaker 50 Watts remove
NameDAP AUDIO D6322 PST-215 Bi Direction Projector Speaker 15W incl.100V Line Transformer removeTOA BS-1034S 10W Wall-Mount Speaker removeTOA BS-633AT Wall mount speaker removeJBL CONTROL 25AV - 5.25'' 2-way Monitor Speaker 120W (Black) removeTOA F-1000BTWP 100V weather proof line full range speaker removeTOA F-1300BTWP/WTWP Installation Speaker 50 Watts remove
Image
SKUD6322BS-1034SBS-633ATCONTROL 25AVF-1000BTWPF-1300BTWP/WTWP
Rating
Price 64.45 incl. GR VAT 61.07 incl. GR VAT 29.19 incl. GR VAT 274.99 incl. GR VAT 146.00 incl. GR VAT 157.16 incl. GR VAT
Stock

Only 2 left in stock

In stock

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityOnly 2 left in stockIn stockAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.

 

Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: Two 5.5" paper
/plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 K Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V-666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz
S.P.L: 94 dB (1W/M)
Material: ABS resin

 

The BS-1034 and BS-1034S are wall-mount speakers matched with a supplied plug-in speaker bracket, for easy installation. The BS-1034/1034S combine a low-frequency 5" (12cm) cone-type speaker and a high-frequency balanced dome-type speaker. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible. Enclosure and grille net colour is off-white, except on the BS-1034S, which comes with a silver net grille.
Speaker components: 5" (12cm) cone-type + Balanced dome tweeter.
Rated Input: 100V Line 10W
Impedance: 100V LINE: 1kΩ (10W),2kΩ (5W) 3.3kΩ (3W),10kΩ (1W)
Sensitivity: (1W 1m)9odB
Frequency Responce: 120-20,000Hz
Input Terminal: Push-in terminal
Finish: Cabinet: HIPS resin, off white, paintable.Grill: SECC, metallic paint.BS-1034S is finished silver metallic paint

The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.

BS-33AT  
Rated Input: 6W (100V line), 3W (70V line)
Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W)
Sensitivity: (1W, 1m): 91dB
Frequency Response: 120 – 15,000Hz (–20dB)
Speaker Component: 5" (12cm) cone-type
Applicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)
Connetion: Push-in connector (bridging terminal)
Attenation Level: 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB)
Operating Temperature: –10°C to 50°C (14°F to 122°F)
Finish: Case: ABS resin, off-white
Rear bord: Hard board
Dimensions: 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control)
Wall Mounting Case front mount: 184mm (7.24“)
Dimensions: Fixing hole mount: 120mm (4.72“)
Weight: 810g (1.79 lb)
Accessory: Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2

 

PRICE IS PER PIECE AND NOT PER PAIR

  • 70 Hz to 23 kHz frequency range (-10 dB)
  • 200 watts continuous program power capacity
  • 87 dB sensitivity (1W/1m)
  • 100° x 100° nominal dispersion
  • 60W, 30W, 15W, 7.5W taps at 70V
  • 60W, 30W, 15W taps at 100V
  • 8 ohms bypass
  • 3 kHz crossover frequency
  • High-Impact Polystyrene (HIPS) enclosure
  • Video shielded for use near video monitors
  • Stainless steel grille for harsh environments
  • Zinc-plated screw down input terminal strip
  • Available in black or white (Control 25AV-WH)
  • Dimensions (HxWxD):  236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
  • Net Weight:  4.0 kg (9 lb)

F-1000BTWP: 100V weather proof line full range speaker

Weather Proof version of the F-1000BT

IPX4 Water rated

Specification Model F-100BTWP
Enclosure Type Bass-reflex type
Rated Input 15W
Impedance 100V line 670Ω(14W), 2kΩ(5W),33kΩ(3W),10kΩ(1W)
Sensitivity 87dB (1w,1m)
Frequency Responce 85-20,000Hz
Crossover Frequency 5kHz
Directivity Angle Horizontal 90°, vertical 90°
Speaker Componenrs Low frequency 10 cm cone type. High Frequency, Balanced dome tweeter
Input Terminals Push-in terminal
Finish HIPS, black
Dimensions 130(W) × 202(H) × 131(D)mm
Weight 2 kg (3.97 lb) (including the supplied brackets)
Accessories Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set, Terminal covers x 1, Terminal cover mounting screws.

FEATURES
Compact box speakers for music and voice paging distribution
Excellent sound quality
Twelve new models:
Black or white
Indoor
Outdoor (IPX4)
Low impedance (8 ohm) or 70/100V versions
Octagonal horn design for smooth coverage
Adjustable high frequency dispersion (F-2000 models)
Extruded cabinet design improves low frequency performance
Individual protection circuit on each component
Screwdriver-adjustable power taps (70/100V models)
Paintable grille and enclosure
Wall/ceiling-mount bracket included
Optional board, cluster and pole-mount brackets
OmniMount-compatible (F-2000 models only, Series 20.5CA/WA)
Optional subwoofers, model HB-1, FB-100 or FB-120
Five year warranty

F-1300 Series
LF Driver: 5” cone woofer
HF Driver: 1” dome tweeter
Crossover: 2kHz
Power Handling: 150W (cont. PGM)
50W (pink noise)
30W (70V transformer version)
Sensitivity (1W, 1m): 90dB SPL
Dispersion: 110° H x 100 ° V

F-1300B (indoor, black, 8 ohm)
F-1300W (indoor, white, 8 ohm)
F-1300BT (indoor, black, 70V)
F-1300WT (indoor, white, 70V)
F-1300BTWP (outdoor, black, 70V)
F-1300WTWP (outdoor, white, 70V)

Weight1.00 kg6.00 kg0.81 kg4.00 kg2.00 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 6.00 kg
Weight 0.81 kg
Weight 4.00 kg
Weight 2.00 kg
Weight 2.00 kg