Content |
Specifications Power taps: 100 Volt: 5W/10W/20W/40W, 70 Volt: 2,5W/5W/10W/20W/40W
Impedance: 4Ohm
Frequency response: 90-20KHZ
Sensitivity: 90dB
Material: ABS
Colour: White
IP rating: IP-40
Dimensions ( LxWxH): 350 x 135 x 260mm
Weight: 3Kg | The JBL Control 128W premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch wooer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs.
JBL Control 128W at a Glance:
- 30 Hz - 20 kHz frequency range.
- 120W continuous program (60W cont. pink, 240W cont. peak).
- 90 dB sensitivity (1W/1m).
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.
|
- For Shower Room / Pool.
- Low Input BGM / FGM (in compliance with IP-X4).
- Splashproof 360° Rotatable 5W Full-Range Sealed 10cm Speaker for Rainy or High Humidity Areas.
Specification |
| Type | Sealed type | Speaker | 10cm dynamic speaker | Rated Power | 5W
Impedance 2k Ω (5W), 3.3k Ω (3W), 5k Ω (2W) | Output Sound Pressure Leve | 90dB / W / M | Frequency Response | 120 ~ 18,000Hz | Operating Temperature Range | -20 ~ +55°C | Speaker Component | 12cm dynamic cone type speaker | Finish | Enclosure; Polypropylene, Grey / Grill; Aluminium, Grey. | Dimensions | (W x H x D) 198 x 177 x 159mm | Weight | 1.4kg |
| The BS-1034 and BS-1034S are wall-mount speakers matched with a supplied plug-in speaker bracket, for easy installation. The BS-1034/1034S combine a low-frequency 5" (12cm) cone-type speaker and a high-frequency balanced dome-type speaker. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible. Enclosure and grille net colour is off-white, except on the BS-1034S, which comes with a silver net grille.
Speaker components: |
5" (12cm) cone-type + Balanced dome tweeter. |
Rated Input: |
100V Line 10W |
Impedance: |
100V LINE: 1kΩ (10W),2kΩ (5W) 3.3kΩ (3W),10kΩ (1W) |
Sensitivity: |
(1W 1m)9odB |
Frequency Responce: |
120-20,000Hz |
Input Terminal: |
Push-in terminal |
Finish: |
Cabinet: HIPS resin, off white, paintable.Grill: SECC, metallic paint.BS-1034S is finished silver metallic paint |
|
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
BS-33AT | | Rated Input: | 6W (100V line), 3W (70V line) | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W) | Sensitivity: | (1W, 1m): 91dB | Frequency Response: | 120 – 15,000Hz (–20dB) | Speaker Component: | 5" (12cm) cone-type | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | Connetion: | Push-in connector (bridging terminal) | Attenation Level: | 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB) | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | Finish: | Case: ABS resin, off-white | Rear bord: | Hard board | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control) | Wall Mounting Case front mount: | 184mm (7.24“) | Dimensions: | Fixing hole mount: 120mm (4.72“) | Weight: | 810g (1.79 lb) | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2 |
|
PRICE IS PER PIECE AND NOT PER PAIR
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
Reviews
There are no reviews yet.