| Content | Creating a well organized workspace in a recordingstudio, DJ-workfloor and every other situation where you need to patch equipment can be a frustrating experience. Lots of cables going everywhere and nowhere: from effects to mixers, from playback-gear to recorders, from mixers to amps and so on. No wonder you loose control and a clear sight. To help with this situation DAP-audio provides just the right tools: the studiosnakes. A studiosnake contains a couple of patchlines in just one cable, avoiding a huge amount of separate cables. Clear numbering and a professional quality are one of the features of these fine products. |
Product type
Pre-assembled Cables
Type
Power / Signal Cable
Connector 1-A
Earthing contact Type E+F (CEE 7/7)
Gender of connector 1-A
male
Gender of connector 1-B
female
Gender of connector 2-A
female
Surge Impedance
55 ohm/km
Gender of connector 2-B
male
Inner conductor 1 cross-section
1.5 mm²
Number of inner conductors 1
3
Inner conductor 2 cross-section
0.22 mm²
Inner conductor 2 material
bare copper
Inner conductor 2 construction
28 x 0.1 mm
Number of inner conductors 2
2
Shield material
Copper / aluminium foil
Capacitance Cond./Cond.
125 pF/m
Maximum Ambient Temperature
-20 - 70° °C
|
Eight-pair studio loom or subcore for stages with moderate stresses, featuring eight Adam Hall male XLR plugs and eight 6.3 millimetre stereo TRS plugs. Individually numbered with printed numbers on the sleeve and additional, coloured markings on the TRS plugs.
Product type
Pre-assembled Cables
Type
Multicore cable
Channels
8
Length
3 m
Colour
Black
Cable diameter
12.8 mm
Center conductor cross section
0.23000000000000001 mm²
Connector 1
XLR
Number of connectors connector 1
8
Gender of connector 1
male
Poles of connector 1
3
Contacts of connector 1
Nickel-silver
Manufacturer of connector 1
Adam Hall
Model number connector 1
Custom-made
Connector 2
6.3 mm jack
Number of connectors connector 2
8
Gender of connector 2
male
Poles of connector 2
3
Contacts of connector 2
Nickel-silver
Manufacturer of connector 2
Adam Hall
Model number connector 2
Custom-made
Weight
0,72 kg
| Eight-pair studio loom or subcore for stages with moderate stresses, featuring eight Adam Hall female XLR plugs and eight 6.3 millimetre stereo TRS plugs. Individually numbered with printed numbers on the sleeve and additional, coloured markings on the TRS plugs.
Product type
Pre-assembled Cables
Type
Multicore cable
Channels
8
Length
3 m
Colour
Black
Cable diameter
12.8 mm
Center conductor cross section
0.23000000000000001 mm²
Connector 1
XLR
Number of connectors connector 1
8
Gender of connector 1
female
Poles of connector 1
3
Contacts of connector 1
Nickel-silver
Manufacturer of connector 1
Adam Hall
Model number connector 1
Custom-made
Connector 2
6.3 mm jack
Number of connectors connector 2
8
Gender of connector 2
male
Poles of connector 2
3
Contacts of connector 2
Nickel-silver
Manufacturer of connector 2
Adam Hall
Model number connector 2
Custom-made
Weight
0,72 kg |
- With female protective contact/XLR to IEC/XLR male connector
- For parallel power transmission and balanced audio signal
- Length: 15 m
- Dual ended split length: 1 m
- Colour: Black
|
Fourfold insert multicord for stage and studio, available in lengths of three or five metres. Equipped with four 6.3 millimetre stereo TRS plugs on one end and eight 6.3 millimetre mono TRS plugs on the other, all colour coded.
Product type
Pre-assembled Cables
Type
Multicore cable
Channels
4
Length
3 m
Colour
Black
Cable diameter
12.8 mm
Center conductor cross section
0.23000000000000001 mm²
Connector 1
6.3 mm jack
Number of connectors connector 1
4
Gender of connector 1
female
Poles of connector 1
3
Contacts of connector 1
Nickel-silver
Manufacturer of connector 1
Adam Hall
Model number connector 1
Custom-made
Connector 2
6.3 mm jack
Number of connectors connector 2
8
Gender of connector 2
male
Poles of connector 2
2
Contacts of connector 2
Nickel-silver
Manufacturer of connector 2
Adam Hall
Model number connector 2
Custom-made
Weight
0,71 kg
|
Reviews
There are no reviews yet.