Content |
The HK Audio LUCAS IMPACT Complete PA System the solution of choice for small to medium-sized venues: compact components, fabulous handling ease and big, bold sound at every volume level. The HK Audio LUCAS IMPACT Complete PA System leading-edge neodymium speakers and digital power amps. With L.U.C.A.S IMPACT, higher performance at a lower weight and smaller footprint is a reality. L.U.C.A.S IMPACT is endowed with the new DDO™ Controller, which dramatically improves upon the predecessorʼs already amazing performance. The patent-applied-for DDO™ technology is powered by an extremely potent 56-bit DSP engineered to effectively compensate errors in speakersʼ response and adjust the signal perfectly to human hearing at every volume. All this adds up to sound that is full and crystal clear at all levels. Specs for each unit seperately: Product Class L.U.C.A.S - The next Generation Model L.U.C.A.S Impact Satellite Power-handling nominal (RMS) 250 W RMS Frequency response +/- 3 dB 130Hz-19kHz Nominal impedance 8 ohms Sensitivity 1W 103 dB Maximum SPL, @ 10% THD 125 dB@10% (Half space) Connections 1 x Speakon NL4 Low/ Mid Speaker 1 x 8" Neodym HF Driver 1" Horn characteristics 60° x 40° CD horn HF protection (passive) dynamic protective circuit Crossover frequency 2,2 kHz, 12 dB / oct. Pole mount MonoTilt, 36 mm Handles 1, integrated Enclosure MDF Grille metal grille with acoustic foam Finish acrylic painture, black Dimensions (WxHxD) 26 cm x 38,5 cm x 28,5 cm Weight 7,5 kg/ 16.5 lbs. Product Class L.U.C.A.S - The next Generation Model L.U.C.A.S IMPACT Subwoofer Frequency response +/- 3 dB 45 Hz - 130 Hz Sensitivity 1W 101 dB Maximum SPL, @ 10% THD 128 dB@10% THD (half space) subwoofer amplifier 1x 700 W / Class D Sat & Mid/high unit amp 2x 250 W / Class D Active protectiion circuits DDO™-Controller, Multiband-Limiter Connections 2x XLR Combi Line In, 2x XLR Through, 2x Speakon Satellite Outs LF Speaker 1x 15" Neodymium Pole mount M20-threaded plate Casters factory-equipped Handles 2, integrated Enclosure MDF Grille metal grille with acoustic foam Finish acrylic painture, black Dimensions (WxHxD) 47,5 cm x 47 cm x 58,5 cm Weight 32 kg/ 74.4 lbs. Title L.U.C.A.S Impact System Product Class L.U.C.A.S The next Generation Model L.U.C.A.S Impact Info Looking for something special in sound reinforcement? Do you wish to pamper your audience with unprecedented audio quality? Then opt for L.U.C.A.S IMPACT. It offers everything that has made L.U.C.A.S the solution of choice for small to medium-sized venues Headline The Sound Sensation Power Rating 1200 W Audience 300 Frequency response +/- 3 dB 45 Hz - 19 kHz subwoofer amplifier 1x 700 W / class D Sat & Mid/high unit amp 2x 250 W / class D Active protectiion circuits DDO™ Controller Connections 2x XLR Combi Line In, 2x XLR Through, 2x Speakon Satellite ou LF Speaker 1x 15" Low/ Mid Speaker 2x 8" Neodymium HF Driver 2x 1" Pole mount HK Audio MonoTilt Casters 15" subwoofer factory-equipped with casters Optional accessories HK Audio Speaker Stand Add-On, HK Audio Protection Covers Weight Total weight: 50 kg / 111 lbs
| Even in the SMALL configuration, the smallest MAILA system is an extremely powerful, active full-range stereo system. The ground stack system consists of one MAILA SUB 2x15'' high-performance subwoofer with cardioid function, three MAILA SAT satellites and one MAILA SPA amplifier module, which drives the satellites, per stereo side.
Like the larger MAILA configurations, MAILA S combines a variety of acoustic concepts to bring maximum power and sound quality from an exceptionally compact and versatile PA system. The 2.5 kW 2x15'' high-performance subwoofer uses a bandpass design and delivers a massive and powerful bass foundation with its newly developed SysCore® DSP.
The MAILA SAT satellites in the elegant unibody aluminium housing are based on the Advanced WaveAhead® technology. Here, five 1'' tweeters are placed in front of a 6.5'' midrange driver and coupled without interference via the SonicGuide® (two combined waveguides). Furthermore, despite the compact dimensions of the satellite, the integrated passive membrane provides extended punch down to 100 Hz. The result is a classic line array dispersion with impressive throw.
On the back of the housing of each MAILA SAT is a rotating handle which hides a groundbreaking innovation: via the patented EasySplay® mechanism, users can adjust the inclination of each individual satellite continuously from 0° to 8° in the blink of an eye. The angle can be adjusted with just one hand, even under load. In this way, every MAILA system offers a uniquely flexible concept for adapting the sound coverage to any sound reinforcement situation at any time.
MAILA is not just "one" product, but a scalable sound reinforcement system that sets new standards in its diversity and flexibility. If required, the MAILA SPA module with its SysCore® DSP can control up to eight MAILA SAT and, in addition to the ground stack variant, also enables flown configurations with a separately placed subwoofer. In this way, MAILA S covers small conferences and lectures just as effortlessly and precisely as DJ performances at festivals and corporate events or a small live band.
Directly on the device or via the free MAILA app (iPadOS), every MAILA system can be adjusted quickly, easily and in detail and supplied with software updates wirelessly. Based on the integrated LogoLink® Wireless Connection, operating ranges of up to 30 metres are no problem for MAILA under practical conditions. Once connected, the app automatically detects the available MAILA components and enables the system to be set up quickly and easily - including calculation of the SAT angles - in the run-up to an event. The highlight: the wireless antennas are invisibly integrated into the LD logos (LogoLink®).
With MAILA, LD Systems presents a new sound reinforcement concept with which users do not need to commit to one system only. MAILA has many faces.
Scope of delivery includes: 6x MAILA SAT satellite, 2x MAILA SPA amplifier module, 2x MAILA SUB subwoofer, 2 x MAILA POLE DB distance rod, 2 x MAILA FC1, 2 x MAILA SUB CB, 2 x MAILA SUB PC and 4 x power cable.
Product type
PA Complete Systems Accessories
Components
2 x MAILA SPA, 2 x MAILA SUB, 6 x MAILA SAT
Total Height
2502mm (Vertikal subwoofer)
Dispersion (H x V)
100° x Curvature dependent
Accessories (included)
2 x Distance bar, 2 x MAILA FC1, 2 x MAILA SUB CB, 2 x MAILA SUB PC, 4 x power cable
System Power (RMS)
7500 W
Frequency response (-6dB)
34 Hz - 20 kHz
|
LD Systems MAUI 28 G2
Compact Column A System with Mixer and Bluetooth black
- All-in-one column speaker for PA and monitor applications
- 2,000 watts peak Class-D system power offer high performance with a low weight
- Powerful bass reproduction with 2 x 8" woofers
- Balanced mids thanks to the 16 x 3" full-range speakers
- Precise and silky highs with 2 x 1" high-frequency drivers
- Increased range and wider coverage through the array arrangement
- Homogeneous dispersion pattern through a BEM-optimised tweeter wave guide
- Distortion-free sound even at the highest volume thanks to LD Systems DynX® DSP technology
- Full control through a 4-channel mixer including Bluetooth® Stereo Audio Streaming
- Two-piece column for compact transport
- Secure plug-and-play connection thanks to the wireless multi-pin mechanism
- A wide range of application options through dismountable columns
- Easy operation with presets for mono or stereo configuration
- Extensive and smart accessories for installation and transport
A complete sound system that you can carry together with your instrument: introducing the MAUI 28 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 28 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed with year-long experience in the design of the column systems as a user-friendly solution for medium sized gigs and fixed installations.
The MAUI 28 G2 is equipped with two 8" woofers, sixteen 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier with an enormous 2,000 watts peak power and produce a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides a top-class performance every time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way crossover with run time correction.
The design of the MAUI 28 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer, DJ or musician in a small band, you will be thrilled with the extraordinary sound and portability of the MAUI 28 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 28 G2 is a well thought out overall solution, down to the last details.
Product type
PA Complete Systems
Frequency response
45 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Low/mid driver dimensions
2 x 8 "
Woofer voice coil (mm)
50.8 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Midrange size
16 x 76.2 mm
Midrange brand
Custom-made
Midrange voice coil
25.4 mm
Tweeter dimensions
2 x 1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil (mm)
25.4 mm
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
780 / 795 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.6 / 5.6 kg
Amplifier module (integrated in subwoofer)
Amplifier output system (RMS)
1000 W
Amplifier output system (peak)
2000 W
Protection circuits
DC protection , Multiband limiter , short circuit , thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch , Hi-Z Level , Line level , Main level , Mono/stereo switch , MP3/Bluetooth Level , Power , Sub level
Indicators
Limit , mono , On , Protect (protection circuit engaged) , Setup , Signal , stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Power consumption Off / On / Max.
0/11/600 W
Line input connectors
RCA , XLR/6.3 mm jack
Line outputs
2 (1x System Out, 1x Sub Out)
Line output connectors
XLR
Mic inputs
XLR/6.3 mm jack
MP3 input connectors
3.5 mm jack
Hi-Z input connectors
6.3 mm jack
Speaker output connections
Custom-made multipin
Bit depth AD/DA converter
24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
|
Although we refer to it as a "column” loudspeaker, the INSPIRE iP2000 delivers the powerful, high-quality sound and optimised dispersion inspired by our award-winning line array products – in a surprisingly lightweight and easy to use, allin-one form factor. Thanks to an on-board 3-channel digital mixer and multichannel 1,000-Watt Class-D amplifi er driving a customengineered 12" subwoofer, 16 x 2.75" neodymium drivers, and a horn loaded super tweeter, the iP2000 is ideally-suited for small to mediumsized performance venues, houses of worship, boardroom presentations, nightclubs, and much more. The iP2000 is lightweight: only 30.7 kg (67.7 lbs) and features industryleading KLARK TEKNIK Digital Sound Processing (DSP), Class-D amplifi er and Spatial Sound technologies – plus convenient Bluetooth stereo audio streaming and iPhone/iPad remote control.
Manufacturer |
TURBOSOUND |
Application |
Installation, Portable PA |
Speaker Type |
Active |
Speaker Category |
Satellite (full range) |
Color |
Μαύρο |
DSP |
Yes |
Speaker Material |
Wooden Cabin |
Speaker Power (Watt) |
1000 |
Weight (kg) |
30,9 |
Woofer (inches) |
12 |
Tweeter / Driver (inches) |
16 x 2,75 - 1 |
dB (max spl) |
123 |
Frequency Response (Hz) |
38-20000 |
Series |
iNSPIRE series |
Model |
iNSPIRE iP2000 |
Part Number |
000-BKX |
Warranty |
3 Years Warranty |
|
Get legendary sound quality with the EON208P all-in-one portable PA system, complete with an 8-channel mixer and Bluetooth audio. With a convenient suitcase-style design, the EON208P makes it easy to get great sound for performances, meetings and events. The 8-channel detachable mixer provides professional connections for mics, instruments and line-level sources, while the 8? two-way stereo speakers deliver best-in-class audience coverage. Bluetooth connectivity also allows you to stream audio from your mobile device. With 300 watts, youʼll have more than enough volume to be heard. Plus, the compact and lightweight form factor means you can carry the entire system with one hand. |
LD Systems DAVE 12 G3 - Active PA-System with DSP
The new LD Systems DAVE 12 G3 is the perfect active PA system for high-powered live gigs, multimedia presentations, and permanent installations in bars and clubs. A 12" bass reflex subwoofer and the satellites with 6.5" drivers and HF horns ensure a good sound with driving, defined bass, natural mids, and clear treble. The 2.1 power amp stage is built into the subwoofer and provides the system components with 2000 W Peak power.
The soul of the DAVE 12 G3 is the LD LECC DSP digital signal processor, which controls all important system functions. It includes specially amplitude and low-latency optimised crossovers, separate equalisers and limiters for the bass, mid, and treble frequency ranges, and a dynamic compressor that controls the subwoofer according to volume and provides for increased punch at low volumes.
The professional full range of features of the DAVE 12 G3 includes sturdy multiplex cabinets, all important protection circuits, RCA, XLR/jack combo and Speakon-compatible connectors, and ergonomically shaped, recessed handles. The LD "Evolutive" handles of the subwoofer are an important innovation with a metal ring handle that permits a secure and convenient grip from all sides. For accurate vertical orientation of the satellites, the speaker supports are vertically adjustable by ± 13,5° max. in seven increments.
Protection covers for the system components and a castor board with a lashing strap for easy transport are available as accessories. Matching speaker stands, spacer tubes, and mounting forks are also available separately.
The DAVE 12 G3 system is ideally suited for portable use and also makes a great impression in permanent installations.
Product type
PA Complete Systems
Colour
Black
Max. SPL (continuous)
119 dB
Max. SPL (peak)
130 dB
Frequency response
40 - 19000 Hz
Dispersion (H x V)
90 x 40 °
Weight
48,5 kg
Subwoofer
Low/mid driver dimensions
12 "
Woofer size
304.8 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2.5 "
Woofer voice coil (mm)
63.5 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
435 mm
Subwoofer height
500 mm
Subwoofer depth
540 mm
Subwoofer features
LD Systems "Evolutive" handles , threaded flange M20
Mid/Hi System
Midrange size
6.5 "
Midrange size
165.1 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1.75 "
Midrange voice coil
44.5 mm
Horn
CD horn
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Speakon compatible
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
15 mm Plywood
Mid/Hi system cabinet surface
texture paint
Mid/Hi system width
250 mm
Mid/Hi system height
400 mm
Mid/Hi system depth
250 mm
Mid/Hi system features
ergonomically shaped insert handles , SM707 stand mount 36 mm
Amplifier module (integrated in subwoofer)
Amplifier
Class A/B
Amplifier output system (RMS)
500 W
Amplifier output system (peak)
2000 W
Protection circuits
limiter , overload , short circuit
Cooling
volume-controlled fan
Controls
Power , Sub level , Subwoofer Phase Reverse , volume
Indicators
Limit , on/off , Protect (protection circuit engaged) , Signal
Operating voltage
transformer
Operating voltage
220 V AC - 240 V AC
Line inputs
2
Line input connectors
6.3 mm jack , RCA , XLR
Line output connectors
XLR
Loudspeaker outputs
2
Speaker output connections
Speakon compatible
Internal sampling frequency
1000 kHz
|
Reviews
There are no reviews yet.