Content |
The HK Audio LUCAS IMPACT Complete PA System the solution of choice for small to medium-sized venues: compact components, fabulous handling ease and big, bold sound at every volume level. The HK Audio LUCAS IMPACT Complete PA System leading-edge neodymium speakers and digital power amps. With L.U.C.A.S IMPACT, higher performance at a lower weight and smaller footprint is a reality. L.U.C.A.S IMPACT is endowed with the new DDO™ Controller, which dramatically improves upon the predecessorʼs already amazing performance. The patent-applied-for DDO™ technology is powered by an extremely potent 56-bit DSP engineered to effectively compensate errors in speakersʼ response and adjust the signal perfectly to human hearing at every volume. All this adds up to sound that is full and crystal clear at all levels. Specs for each unit seperately: Product Class L.U.C.A.S - The next Generation Model L.U.C.A.S Impact Satellite Power-handling nominal (RMS) 250 W RMS Frequency response +/- 3 dB 130Hz-19kHz Nominal impedance 8 ohms Sensitivity 1W 103 dB Maximum SPL, @ 10% THD 125 dB@10% (Half space) Connections 1 x Speakon NL4 Low/ Mid Speaker 1 x 8" Neodym HF Driver 1" Horn characteristics 60° x 40° CD horn HF protection (passive) dynamic protective circuit Crossover frequency 2,2 kHz, 12 dB / oct. Pole mount MonoTilt, 36 mm Handles 1, integrated Enclosure MDF Grille metal grille with acoustic foam Finish acrylic painture, black Dimensions (WxHxD) 26 cm x 38,5 cm x 28,5 cm Weight 7,5 kg/ 16.5 lbs. Product Class L.U.C.A.S - The next Generation Model L.U.C.A.S IMPACT Subwoofer Frequency response +/- 3 dB 45 Hz - 130 Hz Sensitivity 1W 101 dB Maximum SPL, @ 10% THD 128 dB@10% THD (half space) subwoofer amplifier 1x 700 W / Class D Sat & Mid/high unit amp 2x 250 W / Class D Active protectiion circuits DDO™-Controller, Multiband-Limiter Connections 2x XLR Combi Line In, 2x XLR Through, 2x Speakon Satellite Outs LF Speaker 1x 15" Neodymium Pole mount M20-threaded plate Casters factory-equipped Handles 2, integrated Enclosure MDF Grille metal grille with acoustic foam Finish acrylic painture, black Dimensions (WxHxD) 47,5 cm x 47 cm x 58,5 cm Weight 32 kg/ 74.4 lbs. Title L.U.C.A.S Impact System Product Class L.U.C.A.S The next Generation Model L.U.C.A.S Impact Info Looking for something special in sound reinforcement? Do you wish to pamper your audience with unprecedented audio quality? Then opt for L.U.C.A.S IMPACT. It offers everything that has made L.U.C.A.S the solution of choice for small to medium-sized venues Headline The Sound Sensation Power Rating 1200 W Audience 300 Frequency response +/- 3 dB 45 Hz - 19 kHz subwoofer amplifier 1x 700 W / class D Sat & Mid/high unit amp 2x 250 W / class D Active protectiion circuits DDO™ Controller Connections 2x XLR Combi Line In, 2x XLR Through, 2x Speakon Satellite ou LF Speaker 1x 15" Low/ Mid Speaker 2x 8" Neodymium HF Driver 2x 1" Pole mount HK Audio MonoTilt Casters 15" subwoofer factory-equipped with casters Optional accessories HK Audio Speaker Stand Add-On, HK Audio Protection Covers Weight Total weight: 50 kg / 111 lbs
| LD Systems STINGER G3 EVENT SET A 2 x 10" powered PA Speaker + 2 x 15" powered Subwoofer
This set is the perfect all-round package for small to medium-sized gigs and functions providing a tight and punchy low end from the two subwoofers. We recommend this set for the following type of application: DJ, small bands and more. The STINGER G3 EVENT SET A is suitable for audiences of up to 300* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 10 A G3 – 10” Powered loudspeaker
2 x STINGER SUB 15 A G3 – 15” Powered subwoofer
2 x STINGER 10 G3 PC – Padded protective cover for loudspeaker
2 x STINGER SUB 15 G3 PC – Padded protective cover for subwoofer
2 x STINGER SUB 15 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment
General
Product type |
PA system |
Type |
Powered |
System output (RMS): |
1.500 W |
Frequency response |
40 - 20,000 Hz |
Dispersion (H x V) |
90 x 50° |
Weight |
91,782 kg |
LD Systems STINGER SUB 15 G3 PC Padded protective Cover for STINGER® G3 Subwoofer 15"
Product type |
PA Complete Systems Accessories |
Material |
birch multiplex |
Type |
castor boards |
Material thickness |
15 mm |
Surface |
Polyurea |
Color |
Black |
Number of casters |
4 |
Wheel diameter |
100 mm |
Manufacturer of castors |
Adam Hall |
number of drag castors |
2 |
Length |
624 mm |
Weight |
6 kg |
LD Systems STINGER SUB 15 G3 CB Dolly Board for Stinger G3 Subwoofer 15" Models
Product type |
PA loudspeaker |
Type |
active |
Low/mid driver dimensions |
10 " |
Woofer size |
254 mm |
Woofer magnet |
Ferrite |
Woofer brand |
Custom-made |
Woofer voice coil |
2 " |
Woofer voice coil (mm) |
50.8 mm |
Horn |
BEM optimized CD Horn |
HF driver dimensions |
1 " |
HF driver size |
25.4 mm |
HF driver magnet |
Ferrite |
HF driver brand |
BMS |
HF driver voice coil |
1 " |
HF driver voice coil |
25.4 mm |
Dispersion (H x V) |
90 x 50 ° |
RMS |
300 W |
Peak power |
600 W |
Frequency response |
65 - 20000 Hz |
Max. SPL (peak) |
127 dB |
Protection circuits |
thermal overload |
Input sensitivity |
-9 dBu |
Controls |
2 x Mic/Line |
Indicators |
Mic |
Line input connectors |
XLR |
Line outputs |
1 |
Operating voltage |
Switching power supply |
Cabinet material |
12 mm Plywood |
Monitor angle |
54 ° |
Width |
325 mm |
Height |
527 mm |
Depth |
318 mm |
Weight |
12,7 kg |
LD Systems STINGER 10 A G3 Active 10" 2-way bass-reflex PA Loudspeaker
Product type |
PA Loudspeakers Accessories |
Material |
Nylon 1680D |
Height |
530 mm |
Width |
350 mm |
Depth |
320 mm |
Weight |
0,5 kg |
LD Systems STINGER 10 G3 PC Padded protective cover for Stinger® G3 PA Loudspeaker 10"
Product type |
PA subwoofer |
Type |
Powered |
Low/mid driver dimensions |
15 " |
Woofer size |
381 mm |
Woofer magnet |
Ferrite |
Woofer voice coil |
3 " |
Woofer voice coil (mm) |
76.5 mm |
Amplifier |
Class D |
Input impedance |
30000 Ohm(s) |
Input sensitivity |
0.3 V |
RMS |
450 W |
Peak power |
900 W |
Frequency response |
40 - Low-Pass Hz |
Line inputs |
2 |
Line input connectors |
XLR |
Line output connectors |
XLR |
Max. SPL (peak) |
133 dB |
Protection circuits |
short circuit |
Power consumption (max.) |
600 W |
Operating Temperature |
0 - 40 °C |
Relative Humidity |
< 80% (non-condensing) |
Cabinet surface |
Polyurea |
Cabinet construction |
Bass Reflex |
Controls |
Mode |
Depth |
624 mm |
Indicators |
Signal |
Line outputs |
2 |
Operating voltage |
SMPS |
Cabinet material |
18 mm Plywood |
Height |
477 mm |
Weight |
31,9 kg |
LD Systems STINGER SUB 15 A G3 Active 15" bass-reflex PA subwoofer
Product type |
PA Subwoofer Accessories |
Color |
Black |
Material |
Nylon 1680D |
Type |
Covers |
Thickness of the padding |
8 mm |
Depth |
625 mm |
Width |
567 mm |
Height |
470 mm |
Weight |
1,191 kg |
| 800Wrms AMPLIFIED PA SYSTEM WITH TWO SUBWOOFERS AND TWO COLUMN SPEAKERS
- Media player with SD / USB / Bluetooth inputs
- Graphic equalizer
- Two MIC / LINE inputs with tone control
- Digital ECHO
- Stereo LINE input
- Monitor output
- RMS power: 800W
- Frequency response: 47-20000Hz
- Max. SPL (continued): 128Db
N. 2 Subwoofer
- Transducer: 12 "(320mm)
- Dimensions (L * W * H): 355*550*440mm
N. 2 Satellites
- Transducers: 4 x 4 "mids, 4 x 1" Neodymium tweeters
- Dimensions (L * W * H): 125*120*480mm
- Stands and cables included
| Even in the SMALL configuration, the smallest MAILA system is an extremely powerful, active full-range stereo system. The ground stack system consists of one MAILA SUB 2x15'' high-performance subwoofer with cardioid function, three MAILA SAT satellites and one MAILA SPA amplifier module, which drives the satellites, per stereo side.
Like the larger MAILA configurations, MAILA S combines a variety of acoustic concepts to bring maximum power and sound quality from an exceptionally compact and versatile PA system. The 2.5 kW 2x15'' high-performance subwoofer uses a bandpass design and delivers a massive and powerful bass foundation with its newly developed SysCore® DSP.
The MAILA SAT satellites in the elegant unibody aluminium housing are based on the Advanced WaveAhead® technology. Here, five 1'' tweeters are placed in front of a 6.5'' midrange driver and coupled without interference via the SonicGuide® (two combined waveguides). Furthermore, despite the compact dimensions of the satellite, the integrated passive membrane provides extended punch down to 100 Hz. The result is a classic line array dispersion with impressive throw.
On the back of the housing of each MAILA SAT is a rotating handle which hides a groundbreaking innovation: via the patented EasySplay® mechanism, users can adjust the inclination of each individual satellite continuously from 0° to 8° in the blink of an eye. The angle can be adjusted with just one hand, even under load. In this way, every MAILA system offers a uniquely flexible concept for adapting the sound coverage to any sound reinforcement situation at any time.
MAILA is not just "one" product, but a scalable sound reinforcement system that sets new standards in its diversity and flexibility. If required, the MAILA SPA module with its SysCore® DSP can control up to eight MAILA SAT and, in addition to the ground stack variant, also enables flown configurations with a separately placed subwoofer. In this way, MAILA S covers small conferences and lectures just as effortlessly and precisely as DJ performances at festivals and corporate events or a small live band.
Directly on the device or via the free MAILA app (iPadOS), every MAILA system can be adjusted quickly, easily and in detail and supplied with software updates wirelessly. Based on the integrated LogoLink® Wireless Connection, operating ranges of up to 30 metres are no problem for MAILA under practical conditions. Once connected, the app automatically detects the available MAILA components and enables the system to be set up quickly and easily - including calculation of the SAT angles - in the run-up to an event. The highlight: the wireless antennas are invisibly integrated into the LD logos (LogoLink®).
With MAILA, LD Systems presents a new sound reinforcement concept with which users do not need to commit to one system only. MAILA has many faces.
Scope of delivery includes: 6x MAILA SAT satellite, 2x MAILA SPA amplifier module, 2x MAILA SUB subwoofer, 2 x MAILA POLE DB distance rod, 2 x MAILA FC1, 2 x MAILA SUB CB, 2 x MAILA SUB PC and 4 x power cable.
Product type
PA Complete Systems Accessories
Components
2 x MAILA SPA, 2 x MAILA SUB, 6 x MAILA SAT
Total Height
2502mm (Vertikal subwoofer)
Dispersion (H x V)
100° x Curvature dependent
Accessories (included)
2 x Distance bar, 2 x MAILA FC1, 2 x MAILA SUB CB, 2 x MAILA SUB PC, 4 x power cable
System Power (RMS)
7500 W
Frequency response (-6dB)
34 Hz - 20 kHz
| MAUI 11 G2 W Portable Column PA System with Mixer and Bluetooth white
A complete sound system that you can carry together with your instrument: introducing the MAUI 11 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as a PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 11 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed after years of experience in the design of the column systems as a user-friendly solution for small to medium-sized gigs and fixed installations.
The MAUI 11 G2 is equipped with three 6.5" woofers, eight 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier boasting 1,000 watts of peak power and producing a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides top-class performance each time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way-crossover with run time correction.
The design of the MAUI 11 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer or DJ, you will be thrilled with the extraordinary sound and portability of the MAUI 11 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 11 G2 is a well thought out overall solution, down to the last details.
General
Product type
PA Complete Systems
Frequency response
50 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Woofer characteristics
Low/mid driver dimensions
3 x 6.5 "
Woofer voice coil (mm)
38.1 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Mid/Hi System
Midrange size
8 x 76.2 mm
Midrange brand
Custom-made
Midrange voice coil
25.4 mm
Tweeter dimensions
2 x1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil (mm)
25.4 mm
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
Aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
620 / 730 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.4 / 2.6 kg
Amplifier module (integrated in subwoofer)
Amplifier output system (RMS)
500 W
Amplifier output system (peak)
1000 W
Protection circuits
DC protection, Multiband limiter, short circuit, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch, Hi-Z Level, Line level, Main level, Mono/stereo switch, MP3/Bluetooth Level, Power, Sub level
Indicators
Limit, mono, On, Protect (protection circuit engaged), Setup, Signal, stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Power consumption Off / On / Max.
0/11/600 W
Line input connectors
RCA, XLR/6.3 mm jack
Line outputs
1 x direct out
Line output connectors
XLR
Mic inputs
XLR/6.3 mm jack
MP3 input connectors
3.5 mm jack
Hi-Z input connectors
6.3 mm jack
Speaker output connections
Custom-made multipin
DSP characteristics
Bit depth AD/DA converter
24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
|
- All-in-one column speaker for PA and monitor applications
- 1,000 watts peak Class-D system power offer high performance with a low weight
- Powerful bass reproduction with 3 x 6.5" woofers
- Balanced mids thanks to the 8 x 3" full-range speakers
- Precise and silky highs with 2 x 1" high frequency drivers
- Increased range and wider coverage through the array arrangement
- Homogeneous dispersion pattern through a BEM-optimised tweeter wave guide
- Distortion-free sound even at the highest volume thanks to LD Systems DynX® DSP technology
- Full control through a 4-channel mixer including Bluetooth® Stereo Audio Streaming
- Two-piece column for compact transport
- Secure plug-and-play connection thanks to the wireless multi-pin mechanism
- A wide range of application options through dismountable columns
- Easy operation with presets for mono or stereo configuration
- Extensive and smart accessories for installation and transport
A complete sound system that you can carry together with your instrument: introducing the MAUI 11 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as a PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 11 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed after years of experience in the design of the column systems as a user-friendly solution for small to medium-sized gigs and fixed installations.
The MAUI 11 G2 is equipped with three 6.5" woofers, eight 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier boasting 1,000 watts of peak power and producing a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides top-class performance each time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way-crossover with run time correction.
The design of the MAUI 11 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer or DJ, you will be thrilled with the extraordinary sound and portability of the MAUI 11 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 11 G2 is a well thought out overall solution, down to the last details.
Product type
PA Complete Systems
Type
active
Colour
Black
Max. SPL (peak)
124 dB
Frequency response
50 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Overall height
2030 mm
Weight
24,9 kg
Woofer characteristics
Low/mid driver dimensions
3 x 6.5 "
Woofer size
3 x 165.1 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
1.5 "
Woofer voice coil (mm)
38.1 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
285 mm
Subwoofer height
650 mm
Subwoofer depth
373 mm
Subwoofer weight
16.9 kg
Mid/Hi System
Midrange size
8 x 3 "
Midrange size
8 x 76.2 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Horn
Waveguide
Tweeter dimensions
2 x1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Neodymium
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
620 / 730 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.4 / 2.6 kg
Amplifier module (integrated in subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
500 W
Amplifier output system (peak)
1000 W
Protection circuits
DC protection , Multiband limiter , short circuit , thermal overload
Cooling
Convection
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch , Hi-Z Level , Line level , Main level , Mono/stereo switch , MP3/Bluetooth Level , Power , Sub level
Indicators
Limit , mono , On , Protect (protection circuit engaged) , Setup , Signal , stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Power consumption Off / On / Max.
0/11/600 W
Line inputs
2 x stereo
Line input connectors
RCA , XLR/6.3 mm jack
Line outputs
1 x direct out
Line output connectors
XLR
Mic inputs
1
Mic inputs
XLR/6.3 mm jack
MP3 inputs
1
MP3 input connectors
3.5 mm jack
Hi-Z inputs
1
Hi-Z input connectors
6.3 mm jack
Loudspeaker outputs
1
Speaker output connections
Custom-made multipin
DSP characteristics
Bit depth AD/DA converter
24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
|
Reviews
There are no reviews yet.