STANDS ARE NOT INCLUDED!! Pool our entire R&D crewʼs collective expertise and what do you get? LUCAS Nano 300, a system that is more compact, efficient and flexible than any LUCAS to date. In fact, itʼs probably the worldʼs smallest, lightest and pound-for-pound loudest PA! Use it a fullrange PA for small gigs, […]
Pool our entire R&D crewʼs collective expertise and what do you get? LUCAS Nano 300, a system that is more compact, efficient and flexible than any LUCAS to date. In fact, itʼs probably the worldʼs smallest, lightest and pound-for-pound loudest PA! Use it a fullrange PA for small gigs, a keyboards or e-drums monitor or as a compact rig for DJs. But what whatever you do, know this: LUCAS Nano 300 always delivers clear, assertive sound and takes up minimum space. And handling is a cinch with the including mixer. Link mode connects two nano 300s to create a powerful twin stereo set. Both mixers remain enabled, so you also have twice as many channels.
Model
Satellite Double
Mid/high unit dispersion pattern, horizontal/vertical
60° x 40°
Max SPL peak
120 dB
Output power system
70 W @ 4 Ohm
Frequency response
190 Hz – 20 kHz
Maximum SPL, @ 10% THD
116 dB
Dimensions (WxHxD)
13 x 26 x 11,5 cm
Weight
2 kg
Model
Subwoofer
Max SPL peak
118 dB
Output power system
160 W @ 2 Ohm
Frequency response
44 Hz – fx
Maximum SPL, @ 10% THD
116 dB
Dimensions (WxHxD)
30 x 39 x 42 cm
Weight
8,3 kg
Model
Satellite Single
Mid/high unit dispersion pattern, horizontal/vertical
60° x 40°
Max SPL peak
116 dB
Output power system
35 W @ 8 Ohm
Frequency response
190 Hz – 20 kHz
Maximum SPL, @ 10% THD
112 dB
Dimensions (WxHxD)
13 x 13 x 11,5 cm
Weight
1 kg
Weight
7.00 kg
Reviews
There are no reviews yet.
Be the first to review “HK Audio LUCAS NANO 300 watt” Cancel reply
2 x 15" powered PA Speaker + 4 x 18" powered Subwoofer
For audiences up to 400* pax
For DJs, outdoor sound reinforcement for bands and large private use
Compact and easy to transport
Extensive and smart accessories for installation and transport
All-rounder for full-range, satellite and monitor applications
Practical presets for quick frequency response contouring
Highly efficient digital amplifier without fan
36 mm Dual-Tilt pole mount for 0° and 5° tilt angle
Birch plywood housing with ultra-robust Polyurea coating
Cardioid subwoofer array presets
Set includes protective covers and castor boards
For audiences up to 300* pax
For DJs, small bands and private use
Compact and easy to transport
Extensive and smart accessories for installation and transport
All-rounder for full-range, satellite and monitor applications
Practical presets for quick frequency response contouring
Highly efficient digital amplifier without fan
36 mm Dual-Tilt pole mount for 0° and 5° tilt angle
Birch plywood housing with ultra-robust Polyurea coating
Cardioid subwoofer array presets
Set includes protective covers and castor boards
Content
STANDS ARE NOT INCLUDED!!
Pool our entire R&D crewʼs collective expertise and what do you get? LUCAS Nano 300, a system that is more compact, efficient and flexible than any LUCAS to date. In fact, itʼs probably the worldʼs smallest, lightest and pound-for-pound loudest PA! Use it a fullrange PA for small gigs, a keyboards or e-drums monitor or as a compact rig for DJs. But what whatever you do, know this: LUCAS Nano 300 always delivers clear, assertive sound and takes up minimum space. And handling is a cinch with the including mixer. Link mode connects two nano 300s to create a powerful twin stereo set. Both mixers remain enabled, so you also have twice as many channels.
Model
Satellite Double
Mid/high unit dispersion pattern, horizontal/vertical
60° x 40°
Max SPL peak
120 dB
Output power system
70 W @ 4 Ohm
Frequency response
190 Hz – 20 kHz
Maximum SPL, @ 10% THD
116 dB
Dimensions (WxHxD)
13 x 26 x 11,5 cm
Weight
2 kg
Model
Subwoofer
Max SPL peak
118 dB
Output power system
160 W @ 2 Ohm
Frequency response
44 Hz – fx
Maximum SPL, @ 10% THD
116 dB
Dimensions (WxHxD)
30 x 39 x 42 cm
Weight
8,3 kg
Model
Satellite Single
Mid/high unit dispersion pattern, horizontal/vertical
The new LD Systems DAVE 8XS is a portable 2.1 multimedia system with a high-performance 8" band pass subwoofer and two satellites (each 4" + 1“, with silk dome).
The system provides crystal-clear sound and was specifically designed for multimedia applications such as home PA or gaming; it is also suitable as a monitor for DJs or keyboardists or as a music system for smaller venues such as bars and cafés. The high-performance A/B amplifier built into the subwoofer provides for both the subwoofer and the satellites. The multimedia system LD DAVE 8XS has line inputs in XLR and RCA format and is equipped with all standard protections. The built-in limiter keeps the system safe from overload and ensures a long service life. On the side of the subwoofer, in addition to an ON/OFF switch and a phase reverse switch (180°), there is a separate subwoofer volume knob that allows you to find the perfect mix of brilliant treble, punchy mids, and powerful bass.
From serial number 130818000001, the satellite speakers are equipped with a 16 mm flange and are therefore compatible with the speaker stands from LDDAVE8SET2.
Product type
PA Complete Systems
Colour
white
Max. SPL (continuous)
117 dB
Frequency response
45 - 19000 Hz
Dispersion (H x V)
60 x 60 °
Weight
29 kg
Subwoofer
Low/mid driver dimensions
8 "
Woofer size
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Cabinet construction
Bandpass
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Subwoofer width
352 mm
Subwoofer height
430 mm
Subwoofer depth
434 mm
Mid/Hi System
Midrange size
2 x 4 "
Midrange size
2 x 101.6 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Speakon compatible
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
12 mm MDF
Mid/Hi system cabinet surface
texture paint
Mid/Hi system width
144 mm
Mid/Hi system height
350 mm
Mid/Hi system depth
170 mm
Mid/Hi system features
16 mm flange , 2 x M6 mounting points for wall mounting , Grilles for satellites included
Amplifier module (integrated in subwoofer)
Amplifier
Class A/B
Amplifier output system (RMS)
350 W
Amplifier output system (peak)
1400 W
Protection circuits
limiter , overload , short circuit
Cooling
Aluminium heat sink
Controls
Power , Sub level , Subwoofer Phase Reverse , volume
Indicators
Power
Operating voltage
transformer
Operating voltage
220 V AC - 240 V AC, 50-60 Hz
Line inputs
2
Line input connectors
6.3 mm jack , RCA , XLR
Loudspeaker outputs
2
Speaker output connections
Speakon compatible Left/Right
Delivering a massive low-end with punch and clarity, this set is ideal for outdoor sound reinforcement. With a quartet of subwoofers and two 15” tops, it easily covers medium-sized gigs at town fairs, street festivals and in marquees. We recommend this set for the following type of application: DJ, outdoor sound reinforcement for bands. The STINGER G3 IMPACT SET A is suitable for audiences of up to 400* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 15 A G3 – 15” Powered loudspeaker
4 x STINGER SUB 18 A G3 – 18” Powered subwoofer
2 x STINGER 15 G3 PC – Padded protective cover for loudspeaker
4 x STINGER SUB 18 G3 PC – Padded protective cover for subwoofer
4 x STINGER SUB 18 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment.
Specifications
General
Product type
PA system
Type
Passive
System output (RMS):
3,400 W
Frequency response
35 – 20,000 Hz
Dispersion (H x V)
90 x 50°
Weight
260 kg
Items in this set
LD Systems STINGER SUB 18 G3 PC Padded protective Cover for Stinger® G3 Subwoofer 18"
Color
Black
Product type
PA Subwoofer Accessories
Type
Covers
Material
Nylon 1680D
Thickness of the padding
8 mm
Depth
625 mm
Width
567 mm
Height
470 mm
Weight
1,5 kg
LD Systems STINGER SUB 18 G3 CB Dolly Board for Stinger G3 Subwoofer 18" Models
Product type
PA Complete Systems Accessories
Material
Birch multiplex
Type
castor boards
Material thickness
15 mm
Surface
Polyurea
Color
Black
Number of casters
4
Wheel diameter
100 mm
Manufacturer of castors
Adam Hall
Number of drag castors
2
Length
650 mm
Width
540 mm
Weight
7 kg
LD Systems STINGER 15 A G3 Active 15" 2-way bass-reflex PA Loudspeaker
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
15 "
Woofer size
381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
3 "
Woofer voice coil (mm)
76.2 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF driver size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50 °
System Power (RMS)
500 W
Peak power
1000 W
Frequency response
50 - 20000 Hz
Max. SPL (peak)
133 dB
Protection circuits
Multiband limiter, over-current, thermal overload
Input sensitivity
-5 dBu
Controls
2 x gain, 2 x Mic/Line
Indicators
Mic
Line input connectors
6.3 mm jack, XLR
Line outputs
1
Operating voltage
Switching power supply
Cabinet material
15 mm Plywood
Monitor angle
54 °
Width
480 mm
Height
737 mm
Depth
455 mm
Weight
26,8 kg
LD Systems STINGER 15 G3 PC Padded protective Cover for Stinger® G3 PA Loudspeaker 15"
Product type
PA Loudspeakers Accessories
Material
Nylon 1680D
Height
700 mm
Width
510 mm
Depth
460 mm
Weight
1 kg
LD Systems STINGER SUB 18 A G3 Active 18" bass-reflex PA subwoofer
Product type
PA subwoofer
Low/mid driver dimensions
18 "
Woofer size
457.2 mm
Woofer magnet
Ferrite
Woofer voice coil
4 "
Woofer voice coil (mm)
101.6 mm
Amplifier
Class D
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
System Power (RMS)
800 W
Peak power
1600 W
Frequency response
35 - Low-Pass Hz
Line inputs
2
Line input connectors
6.3 mm jack, XLR
Line output connectors
XLR
Max. SPL (peak)
135 dB
Protection circuits
DC, limiter, over voltage, short circuit
Power consumption (max.)
600 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet surface
Polyurea
Cabinet construction
Bass Reflex
Controls
Main level, Mode
Depth
740 mm
Indicators
Limit, Mode, On, Protect (protection circuit engaged), Signal
Line outputs
2
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching), SMPS
Cabinet material
18 mm Plywood
Width
677 mm
Height
547 mm
Weight
42,6 kg
LD Systems STINGER G3 EVENT SET A 2 x 10" powered PA Speaker + 2 x 15" powered Subwoofer
This set is the perfect all-round package for small to medium-sized gigs and functions providing a tight and punchy low end from the two subwoofers. We recommend this set for the following type of application: DJ, small bands and more. The STINGER G3 EVENT SET A is suitable for audiences of up to 300* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 10 A G3 – 10” Powered loudspeaker
2 x STINGER SUB 15 A G3 – 15” Powered subwoofer
2 x STINGER 10 G3 PC – Padded protective cover for loudspeaker
2 x STINGER SUB 15 G3 PC – Padded protective cover for subwoofer
2 x STINGER SUB 15 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment
General
Product type
PA system
Type
Powered
System output (RMS):
1.500 W
Frequency response
40 - 20,000 Hz
Dispersion (H x V)
90 x 50°
Weight
91,782 kg
LD Systems STINGER SUB 15 G3 PC Padded protective Cover for STINGER® G3 Subwoofer 15"
Product type
PA Complete Systems Accessories
Material
birch multiplex
Type
castor boards
Material thickness
15 mm
Surface
Polyurea
Color
Black
Number of casters
4
Wheel diameter
100 mm
Manufacturer of castors
Adam Hall
number of drag castors
2
Length
624 mm
Weight
6 kg
LD Systems STINGER SUB 15 G3 CB Dolly Board for Stinger G3 Subwoofer 15" Models
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF driver size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50 °
RMS
300 W
Peak power
600 W
Frequency response
65 - 20000 Hz
Max. SPL (peak)
127 dB
Protection circuits
thermal overload
Input sensitivity
-9 dBu
Controls
2 x Mic/Line
Indicators
Mic
Line input connectors
XLR
Line outputs
1
Operating voltage
Switching power supply
Cabinet material
12 mm Plywood
Monitor angle
54 °
Width
325 mm
Height
527 mm
Depth
318 mm
Weight
12,7 kg
LD Systems STINGER 10 A G3 Active 10" 2-way bass-reflex PA Loudspeaker
Product type
PA Loudspeakers Accessories
Material
Nylon 1680D
Height
530 mm
Width
350 mm
Depth
320 mm
Weight
0,5 kg
LD Systems STINGER 10 G3 PC Padded protective cover for Stinger® G3 PA Loudspeaker 10"
Product type
PA subwoofer
Type
Powered
Low/mid driver dimensions
15 "
Woofer size
381 mm
Woofer magnet
Ferrite
Woofer voice coil
3 "
Woofer voice coil (mm)
76.5 mm
Amplifier
Class D
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
RMS
450 W
Peak power
900 W
Frequency response
40 - Low-Pass Hz
Line inputs
2
Line input connectors
XLR
Line output connectors
XLR
Max. SPL (peak)
133 dB
Protection circuits
short circuit
Power consumption (max.)
600 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet surface
Polyurea
Cabinet construction
Bass Reflex
Controls
Mode
Depth
624 mm
Indicators
Signal
Line outputs
2
Operating voltage
SMPS
Cabinet material
18 mm Plywood
Height
477 mm
Weight
31,9 kg
LD Systems STINGER SUB 15 A G3 Active 15" bass-reflex PA subwoofer
Product type
PA Subwoofer Accessories
Color
Black
Material
Nylon 1680D
Type
Covers
Thickness of the padding
8 mm
Depth
625 mm
Width
567 mm
Height
470 mm
Weight
1,191 kg
LD Systems DAVE 12 G3 - Active PA-System with DSP
The new LD Systems DAVE 12 G3 is the perfect active PA system for high-powered live gigs, multimedia presentations, and permanent installations in bars and clubs. A 12" bass reflex subwoofer and the satellites with 6.5" drivers and HF horns ensure a good sound with driving, defined bass, natural mids, and clear treble. The 2.1 power amp stage is built into the subwoofer and provides the system components with 2000 W Peak power.
The soul of the DAVE 12 G3 is the LD LECC DSP digital signal processor, which controls all important system functions. It includes specially amplitude and low-latency optimised crossovers, separate equalisers and limiters for the bass, mid, and treble frequency ranges, and a dynamic compressor that controls the subwoofer according to volume and provides for increased punch at low volumes.
The professional full range of features of the DAVE 12 G3 includes sturdy multiplex cabinets, all important protection circuits, RCA, XLR/jack combo and Speakon-compatible connectors, and ergonomically shaped, recessed handles. The LD "Evolutive" handles of the subwoofer are an important innovation with a metal ring handle that permits a secure and convenient grip from all sides. For accurate vertical orientation of the satellites, the speaker supports are vertically adjustable by ± 13,5° max. in seven increments.
Protection covers for the system components and a castor board with a lashing strap for easy transport are available as accessories. Matching speaker stands, spacer tubes, and mounting forks are also available separately.
The DAVE 12 G3 system is ideally suited for portable use and also makes a great impression in permanent installations.
Product type
PA Complete Systems
Colour
Black
Max. SPL (continuous)
119 dB
Max. SPL (peak)
130 dB
Frequency response
40 - 19000 Hz
Dispersion (H x V)
90 x 40 °
Weight
48,5 kg
Subwoofer
Low/mid driver dimensions
12 "
Woofer size
304.8 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2.5 "
Woofer voice coil (mm)
63.5 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
435 mm
Subwoofer height
500 mm
Subwoofer depth
540 mm
Subwoofer features
LD Systems "Evolutive" handles , threaded flange M20
Mid/Hi System
Midrange size
6.5 "
Midrange size
165.1 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1.75 "
Midrange voice coil
44.5 mm
Horn
CD horn
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Speakon compatible
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
15 mm Plywood
Mid/Hi system cabinet surface
texture paint
Mid/Hi system width
250 mm
Mid/Hi system height
400 mm
Mid/Hi system depth
250 mm
Mid/Hi system features
ergonomically shaped insert handles , SM707 stand mount 36 mm
Amplifier module (integrated in subwoofer)
Amplifier
Class A/B
Amplifier output system (RMS)
500 W
Amplifier output system (peak)
2000 W
Protection circuits
limiter , overload , short circuit
Cooling
volume-controlled fan
Controls
Power , Sub level , Subwoofer Phase Reverse , volume
Indicators
Limit , on/off , Protect (protection circuit engaged) , Signal
Operating voltage
transformer
Operating voltage
220 V AC - 240 V AC
Line inputs
2
Line input connectors
6.3 mm jack , RCA , XLR
Line output connectors
XLR
Loudspeaker outputs
2
Speaker output connections
Speakon compatible
Internal sampling frequency
1000 kHz
The DAVE 15 G3 is a powerful active compact system. A bass reflex subwoofer with a 15" driver constitutes the massive, powerful foundation. The satellites with 8" drivers and HF horns are responsible for a natural sounding, assertive midrange and transparent treble. The subwoofer incorporates a 2.1 power amp module that drives the components of the DAVE 15 G3 with 2800W of Peak power.
The LD LECC DSP digital processor ensures perfectly tuned functioning of the system. It includes specially amplitude and low-latency optimised crossovers, separate equalisers and limiters for the bass, mid, and treble frequency ranges, and a dynamic compressor that controls the subwoofer according to volume and provides for increased punch at low volumes.
The thoroughly professional features of the DAVE 15 G3 active PA system include sturdy multiplex cabinets, all important protection circuits, RCA, XLR/jack combo and Speakon-compatible connectors, and ergonomically shaped, recessed handles. The LD "Evolutive" handles of the subwoofer are especially worthy of mention: the innovative design with a metal ring handle permits secure, convenient handling from all sides. For accurate vertical orientation, the speaker supports of the satellites are vertically adjustable by ± 13,5° max. in seven increments.
Speaker protection covers and a castor board with a lashing strap for simple transport are available as accessories. Matching speaker stands, spacer tubes, and mounting forks are also available separately.
Like all systems in the DAVE series, the DAVE 15 G3 is suitable for portable use and for permanent installation.
Product type
PA Complete Systems
Colour
Black
Max. SPL (continuous)
121 dB
Max. SPL (peak)
132 dB
Frequency response
35 - 19000 Hz
Dispersion (H x V)
90 x 40 °
Weight
60,9 kg
Subwoofer
Low/mid driver dimensions
15 "
Woofer size
381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
3 "
Woofer voice coil (mm)
76.2 mm
Cabinet construction
vented
Cabinet material
18 mm Plywood
Cabinet surface
texture paint
Subwoofer width
480 mm
Subwoofer height
570 mm
Subwoofer depth
635 mm
Subwoofer features
LD Systems "Evolutive" handles , threaded flange M20
Mid/Hi System
Midrange size
8 "
Midrange size
203.2 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1.5 "
Midrange voice coil
38.1 mm
Horn
CD horn
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Speakon compatible
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
15 mm Plywood
Mid/Hi system cabinet surface
texture paint
Mid/Hi system width
275 mm
Mid/Hi system height
430 mm
Mid/Hi system depth
260 mm
Mid/Hi system features
ergonomically shaped insert handles , SM707 stand mount 36 mm
Amplifier module (integrated in subwoofer)
Amplifier
Class A/B
Amplifier output system (RMS)
700 W
Amplifier output system (peak)
2800 W
Protection circuits
limiter , overload , short circuit
Cooling
volume-controlled fan
Controls
Power , Sub level , Subwoofer Phase Reverse , volume
Indicators
Limit , on/off , Protect (protection circuit engaged) , Signal
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.