M-AUDIO Micro DAC Digital to Analog USB

Micro DAC is a USB digital-to-analog (DAC) converter with two outputs, one analog and one digital (optical). Itʼs ideal for converting the audio from your computer into a high-quality analog format without needing to carry anything larger than a flash drive. The sound quality available from the typical headphone jack on a portable device or coming from the standard-issue soundcard found in virtually every computer leaves a lot to be desired.  Micro DAC delivers a marked upgrade in sound quality, compared to just plugging your headphones directly into your unitʼs headphone jack.

Use the 1/8-inch analog output to connect any headphones, and enjoy vibrant high-fidelity sound. There is a gain switch that boosts the signal level, so you can drive even high-impedance headphones to a robust loudness level. And since virtually all high-quality audio equipment has an optical digital input, Micro DACʼs optical digital output is perfect for driving that equipment with a pure digital signal—especially valuable since most computers do not have a digital output.

Micro DAC has a rugged aluminum housing and is USB-bus-powered. Getting professional-quality audio from your computer couldnʼt be easier!

• Aluminum housing for ruggedness while traveling
• 1/8" headphone output
• 1/8" coaxial digital output
• Gain switch for high-impedance headphones, to easily drive any model
• Slim, small design for portability
• Professional audio quality
• 16-bit/48kHz audio conversion over a USB connection
• USB-bus-powered

• Windows 7 - Windows 10 Compatible
• OSx 10.7.5 - 10.11 Compatible

The ADI-2 is a both compact and extremely flexible 2-Channel Hi-End AD/DA-converter. The small 9.5' unit offers top notch AD/DA-conversion from/to SPDIF, AES and ADAT, at up to 192 kHz. Its ability to use SPDIF, AES and ADAT format provides outstanding compatibility. Whatever it is - simply get connected! Key features of this extraordinary flexible converter are balanced inputs and outputs, monitoring via headphone out, SteadyClock for optimal converter quality, 3-stage hardware input and output level control, and its capability to run on a wide range of power supplied.

The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.

Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?

• USB Bus power without using unwanted AC adapter
• Works with up to 24bit/96kHz audio source
• Exclusive PLL power supply is built in to reproduce the stable electrical supply
• High quality analog headphone amp to drive any type of headphones
• Equipped with hgih-grade AKM 32bit(*) DAC AK4390
• Condensers and OP amp designed exclusively for audio products
• USB / Digital (Optical) input selector
• Headphones / RCA (Analog) output selector
• Doubles as D/D converter from USB digital audio to Optical
• An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter

Note: When using the USB input, the sampling frequency is fixed at 96kHz.  Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.

Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)

Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)

General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g

Portable USB-DAC and headphone amplifier DA-10 provides Denon's audio performance on par with top sound systems of separate devices in a compact size and equipped with high-capacity rechargeable lithium-ion battery of 3200 mAh, for many hours listening pleasure anywhere, even on the road.

Excellent audio performance from your digital music sources
With many mobile devices, headphone amplifier section is mostly designed for low power consumption for extending battery life. While this is satisfactory with normal headphones with top type headphones, the sound performance suffers.
The DA-10 features advanced analog output stage, with the possibility of treatment of a very wide range of types of headphones, including top type models headset and studio-quality headphones, which are often high impedance and require more power than the output stage.
A mounted sideways gain switch allows you to adjust the gain of the output stage for a perfect combination with your favorite top headphones, including high impedance models, and the final analog output module has a separate power cache circuit for perfect listening experience. There is also the possibility steady output for connection to an external audio system.

High quality audio technologies
Located in an elegant aluminum chassis with solid volume slider aluminum alloy, the DA-10 is equipped with Denon's exclusive technologies for superior music listening experience. With the most sophisticated converting digital signal to analog, the DA-10 is equipped with a heading reference Burr-Brown PCM-1795 32-bit high resolution DAC chip, that can treat multiple sampling frequencies up to 192 kHz, and bit depths up 24 bits. The DA-10 can also decode high-resolution DSD audio tracks (the type found on SACDs), and has the ability to decode DSD files 2.8 and 5.6 MHz.
The AL32 proprietary technology Denon using our inventive DSP digital filtering, sampling upwardly and processing algorithms for converting upwardly and patterning high-resolution digital audio noise at 32 bits, providing drastically improved low-level details and disappearance deformation.

Design Net for music lovers
Equipped with Class Reference Burr-Brown PCM-1795 DAC chip, the DA-10 has a leading manufacture for music lovers, including dual master clock crystals, each optimized for specific sampling frequencies and located right next to the DAC chip on the sound board for maximum reduction in distortion. The digital section features asynchronous treatment USB signal for maximum stability and sound quality, and the DA-10 is equipped with the exclusive Denon AL32 advanced DSP digital filtering and shaping-noise, providing the highest resolution possible with current HD tracks.
There are separate circuit cards for digital audio portion and the power portion for avoiding interference between the steps, and the portion of the D / A converter is capable of decoding the wider range of sampling frequencies (up to 192 kHz) and bit depths (up to 24 bits ).

Compatibility with a wide range of Mobile Devices
The DA-10 is available with many connecting cables for compatibility with the widest variety of portable music players and smartphones. The USB-30 pin cable is compatible with many devices of Apple, including iPod, iPod touch, iPhone and iPad. The USB-Lightning cable is compatible with newer devices of Apple, including the iPhone 5 and 6, iPad Air, and other models with the wiring Lighting.
There is also, USB-micro "B" connector for compatibility with other smart devices, and is also included analog stereo 3.5mm-3.5mm cable to connect to a headphone output of a player, the cables with angled plug for secure connection.

Add and digital connectivity to an existing Hi-Fi system
At home, the DA-10 can still make your analogue Hi-Fi digital-compatible system. Connect the constant-level analog output of the DA-10 to the analog input of your Hi-Fi amplifier, then digital streaming music from your PC via micro USB-B input at high resolution up to 192kHz / 24bit or DSD64 (2.8MHz ) and DSD128 (5.6 MHz).

Long Lasting Battery Life with Battery Indicator
Featuring a high-capacity rechargeable lithium-ion battery of 3200 mAh, the DA-10 provides up to seven hours of continuous operation when connected to your portable music player or smartphone via USB. The multi-charging indicator function with LED lets you know the current battery charge level with the opening. When the battery is between 50% and 100%, flashing green. When the battery level falls between 20% and 49%, the LED blinks orange, and when the level falls below 20%, the LED changes to red, indicating that it is time to recharge.
When connected to a portable player through port 3.5mm, the battery life can be up to 24 hours. The recharge time can be short up to 3.5 hours when plugged into a USB charger with output of 1.5 A.

Sleek and Convenient Carrying Case
The included carrying case has a stylish design and includes two internal pockets for the DA-10 and your portable player or smartphone. The housing accommodates the portable device you have translucent plastic film, so that you can see and directly manipulate your device, there are safety belts to live everything in place. When folded closed, the carrying case also provides protection from mistreatment and even provides some protection against the elements.
With the portable USB-DAC and headphone amplifier DA-10 of Denon, your music will never sound better, and you can enjoy unchanged fidelity to the top headphones can provide.

Phono preamplifier with A/D converter and USB output

• Amplification and RIAA equalisation for MM & MC
• Design principle inspired by Dr. Sykora
• Digitalisation of vinyl for recording direct to USB with suitable recording programs
• Automatic recognition, no additional drivers needed
• Runs on Windows®, Mac OS® & Linux operating systems
• SMD circuitry with special low noise components
• Internal metal shielding
• Small size allows installation close to record player
• Gold plated RCA connection sockets
• Outboard power supply included
• Black or White casing

•  With 2.4G WiFi, Mirascreen G7M wireless display dongle is powered by brand-new chipset AM8268. Provides faster reaction speed and stable performance.
• Support mirroring and streaming your mobile devices to TV or projector or any HD display wirelessly. Turn your HDTV into a smart TV, use your mobile devices as the controller.
• Works with smartphones and tablet, suitable for Android and iOS OS. You can enjoy wireless display with your smart devices.
• Suitable for Miracast, DLNA, for Airplay to sync cast photo, video, music, office files, web browser, live camera from for iPhone and Android smart phone or tablet PC to large screen TV or Projector via WiFi, designed for PowerPoint presentation and video meeting.
•  With HD interface, supports 1080P ultra HD wireless video transmission. Bring you ultra-clear visual enjoyment.