| Price | €60.40 €57.39 incl. GR VAT | €5,250.00 €5,125.00 incl. GR VAT | €633.80 €469.00 incl. GR VAT | €49.50 €29.00 incl. GR VAT | €378.56 €319.00 incl. GR VAT | €4,960.00 €4,255.00 incl. GR VAT |
| Content |
Flexible gooseneck lamp. It is bright enough for DJ & professional users to work in dimly lit areas
Specifications Lightsource: 4x 5mm Led's
Color: Cool White
Length: 13“
Beam: 20°
Voltage: 12V DC
Current: 65 mA
Connection: 3p XLR type
| Professional Automation for Multi-microphone Mixing
The Dugan-MY16 is an automatic mixing card for Yamaha digital mixers that employs advanced technology from Dan Dugan Sound Design. When multiple microphone inputs need to be mixed without a script or pre-planned gain changes, the Dugan-MY16 can automatically optimize gain distribution over multiple faders so that the engineer is free to concentrate on the quality of the mix, rather than being chained to the faders. It's almost like having a talented assistant engineer keeping track of fader levels, lightening the overall workload and maximizing efficiency.
Features
- 24bit resolution, 16-in/16-out automatic mixing (8-in/8-out at 96 kHz)
- 2x Optical connectors, 1x RJ-45 connector
- Up to 8 cards can be used simultaneously to handle up to 128 channels at 48 kHz, or 64 channels at 96 kHz
- Automatic detection of active mics with automatic control of individual channel and overall gain
- No speech cutoff due to late fader activation, for smooth, uninterrupted sound
- Effective background noise and feedback suppression without the need for noise-gate type threshold level settings
- Easy setup: simply insert on the appropriate mixer input channels and raise the faders
- Channels can be grouped to make up to three independent automatic mixers
- Dugan Control Panel software application provides remote control and level monitoring capability
- Can also function as an 8-channel auto-mixer + 8-channel ADAT interface
Specifications
| General Specifications |
| Operating Modes |
Standard: 16 channels of Dugan mixing at 44.1 or 48kHz, ADAT connectors link multiple Dugan units
High-rate: 8 channels of Dugan mixing at 88.2 or 96kHz sample rate, ADAT connectors link multiple Dugan units
Shared: 8 channels of Dugan mixing and 8 channels of general purpose ADAT I/O |
| Digital I/O |
ADAT optical, 24 bit, 44.2/48kHz (Shared mode only) |
| Gain |
Unity |
| Audio Latency |
0.2ms |
| Optical Linking |
Up to 8 units may be linked in a ring; links with Models D-2, D-3 , E, E-1 and Dugan-MY16 |
| Connectors |
10/100 BASE T: RJ-45
Linking and Digital I/O: ADAT optical |
| Recommended
Yamaha Mixers |
CL5/3/1, PM5D/-RH, DSP5D, M7CL-48ES/-48/-32, LS9-32/-16, DM2000, DM1000, 02R96, 01V96/96i, DME64N/24N |
| Dimensions |
H=4.0cm (1.57“)
W=12cm (4.72“)
D=17.6cm (6.91“) |
| Weight |
160g (5.6oz)
0.6kg (1lb 5oz) in shipping box |
|
High-Performance 32-Channel Audinate Dante Expansion Card for X32
- 32-channel 48 kHz, bi-directional audio interface for Dante* IP networks
- High-speed 24-bit signal transmission with sample-accurate synchronization and low latency
- Allows interfacing with standard 100 MBit/s or Gigabit network infrastructure with DSCP-based QoS
- Mixed sample and bit rates can coexist on the same network
- Full remote control of X32 possible using the integrated Ethernet switch
- Audinate* Dante Controller application with full control over configuration and signal routing among all Dante-enabled devices
- Dante Virtual Soundcard allows employing your PC or Mac* for IP-based multitrack recording and playback of up to 64 channels (license optionally available at www.audinate.com)
- Secondary connection can be configured for seamless redundant audio networking
- 3-Year Warranty Program**
- Conceived and designed by BEHRINGER Germany
|
- Allows 19" rack mounting of the MG102C and MG82CX
The MG82CX and MG102C can be rack-mounted using an optional rack-mounting kit for optimum integration with any system or installation. |
High-Performance 32-Channel MADI Expansion Card for X32
- 32-channel, bi-directional audio interface via MADI (AES10)
- Optical duplex SC-plugs (IEC874-19) to connect with fibre optic MADI devices
- Multimode fibre optic cable length of up to 2 km supported
- Dual BNC terminals for transmission via standard 75-Ohm coaxial cable of up to 100 m length
- BNC connectivity can be used as a redundancy network with fibre optic installations
- Console allows selecting a block of 32 out of up to 64 MADI channels
- Both MADI formats 56-channel (AES10-1991) and 64-channel (AES10-2003) supported
- 3-Year Warranty Program*
- Conceived and designed by BEHRINGER Germany
| 8-Channel AES/EBU I/O Card with REF Video Input
The MY8-AEB is an eight-channel digital input/output card that complies with the AES 3id-1995 standard. It provides video input jacks that allow the host device in which the MY8-AEB is installed to be synchronized to a video signal.
In addition to 8 BNC connectors (4 stereo inputs and 4 stereo outputs) the MY8-AEB has a REF Video input that can be used to receive a PAL or NTSC format Reference video (Black Burst) signal that will provide the synchronization word clock for the device into which the card is installed.
Features
- 24bit resolution, 8-in/8-out AES/EBU interface
- 9x BNC connetors: 4x IN, 4x OUT, 1x Reference video input
- “eXi-Clock" synchronization maintenance function
Specifications
| General Specifications |
| Channel Count |
8IN / 8OUT / 1REF Video IN |
| Format |
AES/EBU (AES-3id) |
| Resolution |
24 bit |
| Connector |
8 x BNC(4 x AES In, 4 x AES Out)
1 x BNC (Reference Video In with "eXi-Clock" sync capability) |
*“eXi-Clock" is a function that is capable of seamlessly continuing word clock generation even if the Reference video signal is interrupted. |
Reviews
There are no reviews yet.