| Content |
The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.
FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling
SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz) 106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)
|
The TX1181 is the perfect companion sub to the TX1122 and TX1152 for compact and portable performance. Using the proven EVS18S woofer, the TX1181 effortlessly provides the low-frequency energy needed to keep up with Tour X boxes, as well as many other EV loudspeaker products. The integrated, low-pass input filter allows for single amp drive, and the high-sensitivity and excellent power handling don\'t require a large, expensive amplifier to generate high SPL.
The TX1181\'s unique Backbone grille not only looks great, but also provides greater strength and damage resistance than simple grille block designs. Proprietary, ergonomically correct handles and angled input panels, and integrated, screw-in-style pole-mount make the TX1181 easy to transport and employ in a variety of applications.
Specifications
| Frequency Response (-3dB) |
50 - 160 Hz |
| Frequency Response (-10dB) |
45 - 700 Hz |
| Recommended High-Pass Frequency |
30 Hz |
| Sensitivity 1W/1m |
100 dB |
| Max. SPL / 1m (calc) |
132 dB |
| System Power Handling (continuous/program/peak) |
500/1000/2000 Watts |
| LF Transducer |
EVS18S |
| Nominal Impedance (Passive) |
8 Ohms |
| Minimum Impedance |
7.5 Ohms |
| Enclosure Material |
Plywood and MDF with EVCOAT |
| Color |
Black |
| Flying |
No |
| Input Connections |
Parallel Neutrik® NL4 |
| Internal Crossover |
Yes |
| Speaker Type |
Subs |
| Weight Net |
33.8 kg ( 74.52 lbs ) |
| Dimensions (HxWxD) |
769 x 439 x 591 mm
(30.28" x 17.28" x 23.27“) |
| Info
The first in JBLʼs new 7 Series line, the 705i and 708i models answer the call for next generation multi-channel monitoring in post rooms, broadcast facilities and trucks. Leveraging patented technologies developed for our flagship M2 Master Reference Monitor, 7 Series deliver detailed imaging, extended frequency response and remarkable output from compact enclosures. Centrally amplified and tuned, and easily installed, 705i and 708i are the heart of an elegant, scalable system for broadcast and post facilities working in immersive audio formats. |
The new Yamaha CW218V features a super durable, paintable, elastomeric-sprayed coating with foam lined acoustically transparent steel grilles. Gives a great professional look much preferred over carpeted enclosures. Assembled by hand in the US by skilled technicians, each cabinet is designed for better low-end response and includes heavy steel handles and sturdy pole sockets to make moving and positioning easy.
The custom drivers from Eminence feature high-strength curvilinear cones and Kapton® voice coil formers, plus oxygen-free copper voice coils and oversize strontium ferrite magnets to provide high power handling and long life. 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex, and dissipate heat. The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection.
Connections are dual Neutrik Speakon® and 1/4" jacks. With professional features, excellent sonic performance, and great value, Club Concert Series loudspeakers deliver premium quality night after night. The CW218V reigns supreme with 2 cast-frame 18" woofers and 30Hz-2kHz frequency response (-10dB). It features 1,220W program handling with 2,400W peak. Sensitivity: 98dB. 48“W x 23“H x 26“D.
| Powerful, dynamic 2 x 8" Bandpass Subwoofer. Its compact dimensions permit unobtrusive placement of the subbass anywhere, either vertically or horizontally. A 2-channel power amplifier is all that is required to operate e.g. a subbass with up to 4 satellites. Sturdy MDF housing with textured finish.
Specifications 2 x 8" Bandpass Subwoofer:
- Model Name: LDSUB88
- Type: Bandpass
- Components:
- Woofer: 2 x 8" Custom Made
- Power Capacity (Cont./Peak): 2 x 100 W / 2 x 180 W
- Frequency Range: 40 Hz - 120 Hz
- SPL 1 W / 1 m: 92 dB
- Max SPL: 115 dB
- Impedance: 2 x 8 ohms
- Connectors:
- Input: Clamp-type
- Output: Clamp-type
- Cabinet Material: 15 mm MDF
- Cabinet Surface: Painting
- Dimensions: 450 x 500 x 520 mm
|
This 2-way passive full range studio monitor loudspeaker which incorporates
an 8? low frequency transducer and a 0.75 inch aluminium dome high frequency
transducer. The system's low frequency driver is mounted as a direct radiator
in a bass-reflex cabinet constructed of MDF wood, with solid Iroko side panels.
The tuning port is located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure. The acoustically
transparent cloth grille system is detachable.
FEATURES:
2-way near/mid-field studio monitor
8" low frequency speaker
1" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
125 W power handling
SPECIFICATIONS:
RMS (Average) Power HandlingR:125 W
Program Power HandlingP:250 W
Peak Power HandlingK: >500 W
Recommended Amplifier:125 W to 250 W at 8 Ω
On-axis Frequency RangeF:38 Hz - 33 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI:3.2 Ω (at 15 kHz)
On-axis Sensitivity 1W / 1 mS: 89 dB SPL
Rated Peak SPL at Full Power: 116 dB
Nominal -6 dB BeamwidthsB:120° Horizontal
(average, 500 Hz to 8 kHz) 95° Vertical
Enclosure Material:MDF with Iroko wood side panels
Color:Black/Iroko wood
Connectors:Binding posts
Dimensions (H x W x D):42 x 28 x 29 cm(16.5 x 11 x 11.5 in)
Mounting:2 x M6 points
Weight: 12.8 kg (28 lbs)
Shipping Weight: 14 kg (31 lbs) |
Reviews
There are no reviews yet.