Content | Mini audio mixer
4 channel ( 4xIN 1xOUT )
* 4xIN Jack 6,3mm to 1xOUT Jack 6,3mm
* Power supply included
- 4x 6.3 mm Mono jack inputs
- 1x 6.3 mm Mono jack outputs
| The NUO 2.0 is a 2 channel analogue mixer addressed to the professional DJ of any kind, in despite of the music style.
It features the professional characteristics that made its predecessors acclaimed worldwide, and it equips the best analogue components available in the market place in order to obtain the highest sound performance.
Whether you play house, techno or hip hop, perform smoothly or as a scratch DJ, the NUO 2.0 will please all your needs thanks to its versatility and plenty of features, such as the precise and ergonomic full cut EQ, FX Send control per channel in pre or post fader mode, faders curve adjustments and suitability for the awarded magnetic ETERNAL crossfader for the professional scratch DJ.
Its superb sound quality and robust format, plus balanced XLR Master output and Booth output for monitoring make it also a perfect mixer for small installations.
_ 2 mixing channels
_ 1 MICRO/LINE channel
_ 2 PHONO inputs
_ 3 LINE inputs
_ Master output XLR and RCA
_ Booth output RCA
_ 3 band full cut EQ
_ Extra large ergonomic EQ knobs
_ 3 band EQ kill switches
_ FX Send control per channel
_ FX Pre/Post fader selector
_ 45mm long life VCA faders
_ 45mm long life VCA crossfader
_ Fader and crossfader shape adjustment
_ Crossfader Reverse and Cut-In
_ Crossfader suitable for ETERNAL | PowerMate 1000
SPECIFICATIONS
Order No.
F01U131113 (DC-PM1000-3-UNIV)
Channels (Mono + Stereo)
6 + 4
Auxiliaries (MON, FX, AUX)
2 Pre, 2 Post, 2 Pre/Post switchable
Maximum Midband Output Power,1 kHz, THD=1%, Dual Channel
into 2.66 Ohms
2 x 1350 W
into 4 Ohms
2 x 1000 W
into 8 Ohms
2 x 600 W
Rated Output Power,THD=0.1%, Single Channel
into 4 Ohms
2 x 900 W
into 8 Ohms
2 x 450 W
Maximum Output Voltage of power amplifier, no load
74 Vrms
THD at 1kHz, MBW=80kHz
MIC input to Master A L/R output, +16 dBu, typical
< 0.005%
POWER AMP INPUTS to Speaker L/R output
< 0.075%
DIM 30, power amplifier, 60Hz, 7kHz
< 0.05%
IMD-SMPTE, power amplifier, 60Hz, 7 kHz
< 0.015% CMRR, MIC input, 1 kHz > 80 dB
Equivalent Input Noise, MIC Input, A-weighted, 150 Ω
-130 dBu
Signal/Noise-Ratio, power amplifier, A-weighted, 4 Ohms
105 dB
Output Stage Topology, amplifier
Class D
Equalization
LO Shelving
+/- 15 dB / 60 Hz
MID Peaking, mono inputs
+/- 15 dB / 100 Hz .. 8 kHz
MID Peaking, stereo inputs
+/- 12 dB / 2.4 kHz
HI Shelving
+/- 15 dB / 12 kHz
Master EQ, 11-band (63, 125, 250, 400, 1k, 1.6k, 2.5k, 4k, 6.3k, 12k Hz)
+/- 10 dB / Q = 1.5-2.5
Filter
LO-CUT, mono inputs
f=80 Hz, 18 dB/oct
VOICE FILTER, mono inputs
FEEDBACK FILTER, MON1/2
70 Hz .. 7 kHz, Notch, -9 dB
Speaker Processing
LPN, switchable
Display
High Contrast OLED
Effects | * 6 Dual stereo inputs, 2 with mic inputs
* RIAA preamps for up to 4 turntables
* Input selectors with 2 colour indicators
* Smooth action level controls
* 2 Stereo aux sends with pre/post switching
* 4 band EQ - high definition of frequency bands, with ʽinfinite killʼ on HF and LF; wide Q for cut, narrow Q for boost
* MIDI output from VCF 1+2, crossfader, LFO 2 (MIDI clock), dedicated data control and start/stop button
* Large ʽlight-pipeʼ illuminated cue switches
* 9 led 3 colour channel ʽbulls eyeʼ LED meters
* Crossfader and Filter assign switches
* Either smooth travel 60mm VCA faders or rotary VCA faders (Linear or Rotary versions)
* Active Penny & Giles VCA crossfader allowing contour to be set from smooth to scratch mix
* Cue/Mix monitor balance control
* 2 Independent mix outputs
* 2 Rotary master level controls
* Dual stereo analogue VCF effects
* 3 Filter modes combine for more effects
* Independent frequency sweep controls
* Resonance control for subtle or wild effects
* Filter LFO Depth and tempo controls
* Illuminated Filter switches punch effect in or out
* Powerful headphones monitor with auto cue
* Headphones split cue and Aux 1 & 2 monitoring
* Stereo music only booth monitor output
* Booth mono and mute switching
* 9 led 3 colour main ʽbulls eyeʼ LED meters
* Balanced +4dBu XLR stereo Mix 1 output
* Impedance balanced Line stereo Mix 2 output
* Pre-fade recording output
Technical Data
Outputs:
2 Independent mix outputs
Mix 1:Balanced 0dBu XLR stereo Mix 1
Mix 2:Impedance balanced Line stereo Mix 2 output
Booth monitor: Stereo music only
MIDI output from VCF 1+2
2 Headphone (6,3 mm/ 3,5 mm) |
- 3 MIC (JACK ¼”) / stereo LINE (RCA) input channel mixer
- Input signal pushbutton selector (MIC/LINE) on back panel
- Independent internal assignable phantom power for all MIC inputs
- Direct MIX input allows straight forward connection of further mixers
- Triple tone control (accessible only with screwdriver)
- 2 stereo OUTPUTS (XLR3 / RCA)
- 3 LED OUTPUT level meter
- 2 additional stereo REC outputs (REC1, REC2)
- Mono mode pushbutton
- Headphones general MIX monitoring
- Remote MUTE control (EUROBLOCK) allows connection with fire detection systems
The SAM mixer series has been specially designed for all public address and communication systems requiring a minimum risk of unwanted external manipulation.
Frequently used controls are easily accessible. Specific adjustments remain only accessible by the installer for precise and permanent settings.
SAM SERIES are very easy to use, even for non-technical users. All this is packed into a compact, 1 unit high, 19'' rack unit.
SAM series general KEY features
- Universal 1 RU, 19” installation mixers
- Excellent frequency response
- Balanced MIC and stereo LINE inputs and main outputs
- Reliable proprietary power supply
- Ideal for any application requiring a trouble free mixer
| Χαρακτηριστικά:Inputs:Gain-Sharing Automatic Mic Mixing Eight XLR Inputs with Level controls & Sig/OL indicators Each can be Mic, Mic with 48V phantom, or Line-level Add up to 64 more gain-sharing inputs by cascading AM2 Automixers Add other audio sources, line inputs and remote controls by connecting to HAL systemOutputs (all mono)XLR Main with Mic/Line switch, Level control & Sig/OL Rane RAD and Cascade IN RJ-45 Ports Cascade In Port connects up to seven additional Rane AM2 mixers, (eight units total) RAD Port may send Output to HAL (DSP/control). It is possible to cascade the AM2 mix into Halogen's Gain-Sharing Auto Mixer or Room Combine Processor DSP, so that all mics connected to HAL may gain-share |
Reviews
There are no reviews yet.