Content |
The nano iDSD Black Label is for those who enjoy great music on-the go.
From your phone, amplify your Spotify, Apple Music or Tidal using an Apple CCK cable or OTG cable for Android.
At home or in the office, use the USB3.0 cable provided to connect to your PC.
Res’ing it up!
The nano iDSD Black Label plays Hi-Res audio up to DSD256 so you can enjoy your tunes in the original format just as the artists intended.
Getting into MQA The nano BL is MQA ready. Use it with Tidal Masters on your computer or mobile.
The mighty nano
The nano iDSD Black Label is small but mighty with 10x more amplification power than an iPhone.
It can drive most headphones and has our iEMatch technology built-in, so it can work with In-Ear-Monitors (IEMs).
The in-built iFi iPurifier means it delivers clean, quality music with no buzz, no hiss and no fuss!
Brilliant balancing act
The iFi exclusive S-Balanced circuit provides all the benefits of balanced outputs such as low-noise and less distortion when used with headphones and IEMs fitted with balanced wiring.
For single-ended headphones, S-Balanced cuts crosstalk in half. The benefits are ‘clearly’ audible.
Listen. Measure.
Fancy getting technical? The nano BL has a Listen option (Minimum Phase Bezier Filter) and a Measure option (Linear Phase Transient-Aligned Filter) for those who like to try a variation to the playback.
We say just switch it on, plug in your device, and listen away.
There is no going wrong with 10 hours of battery life.
The Burr-Brown True Native® chipset means file formats remain unchanged. Listen to music as the artist intended in the format in which it was recorded.
Hi-Res True Native® playback of all music formats from MP3 to DSD256, PCM384 and DXD384.
Listen to Master Quality Authenticated audio straight out of the box. Connect to Tidal Masters and check the option to stream MQA.
Our video tutorials on You Tube show you how.
iFi’s exclusive S-Balanced® circuit delivers maximum performance from single-ended and balanced headphones alike.
See our Tech Note to dig deeper.
This precise, analogue volume control is normally found on items at a much higher price point. Its transparent sonic nature delivers a smooth sound with no loss in music retrieval. It delivers the sonic goods.
Zero Jitter® equals good audio. Is it essential to have a very precisely buffered digital signal before it goes to a DAC.
We pushed the envelope even further by doing this not only with the nano iDSD BL\'s USB input, but the rest of the digital interfaces as well.
This unit has up to 10 hours of non-stop playing time. Always make sure you switch it on first and then plug in your device.
General
|
|
Input(rear): |
USB2.0 type A ‘OTG’ Socket (with iPurifier® technology built-in) |
Output(rear); |
1 x audio fixed line out L+R 3.5mm |
Digital Filter: |
2 positions. 2 filters |
Outputs(front): |
2 x 3.5mm headphone audio outputs. ‘Direct’ and ‘iEMatch®’ |
DAC
|
|
DAC: |
DSD, DXD, PCM DAC by Burr Brown Bit-Perfect DSD processing, Bit-Perfect DXD processing |
Clock: |
Low-jitter crystal clock |
Audio Formats: |
DSD 256/128/64/12.4/11.2/6.2/5.6/3.1/2.8 |
|
DXD 384/352.8kHz |
|
PCM 384/352.8/192/176.4/96/88.2/48/44.1kHz |
|
MQA 88.2/96/176.4/192kHz filters |
Filter–PCM: |
Listen (transient optimised minimum phase) |
|
Measure (frequency response optmised) |
–DSD: |
Listen (extended bandwidth transient optimised) |
|
Measure (narrow bandwidth, low output band noise optimised) |
–DXD: |
Fixed Bit-Perfect Processing |
–MQA: |
Fixed MQA Filter |
Headphone Amplifier
|
|
Amplifier: |
Dual Mono 2 x 285mW Direct Drive, coupling capacitor free circuit for highest fidelity |
Volume Control: |
3.5mm TRRS with Balanced compatible wiring |
Dynamic Range(including DAC): |
> 109dB(A) @ 3v (Direct) |
|
> 107dB(A) @ 0.5V (iEMatch®) |
THD &N (@ 125mW/30R): |
< 0.005% |
Max. Output ( 3.5V @ 600Ω Load (Direct) (20mW/600Ω) |
|
> 2.9V @ 30Ω Load (Direct) (285mW/30Ω) |
|
> 1.7V @ 15Ω Load (Direct) (200mW/15Ω) |
Output Impedance : |
< = 1Ω (Direct) |
|
< = 4Ω (iEMatchsup>®) |
Channel Separation: |
> 79dB @ 600Ω Load (Direct) |
|
> 79dB @ 15Ω Load (Direct) (1kHz, TRRS plug Balanced wiring) |
Line Output
|
|
Dynamic Range(Line): |
> 109dB(A) |
THD & N(0dBFS Line): |
< 0.004% |
Output Voltage(Line): : |
2.15V (+/-0.05V) |
Output Impedance: |
< 240Ω |
Channel Separation: |
> 99dB (@ 1kHz) |
Jitter(correlated): |
Below test set limit |
Dimensions: |
96(l) x 64(w) x 25.5(h)mm |
Weight: |
139g (0.31 Ibs) |
Warranty period: |
12 months |
|
Digital to Analogue Converter
Thanks to a Wolfson 24-bit DAC, a 24-bit/96kHz driverless USB Audio 1.0 input and S/PDIF and TosLink digital inputs, the DacMagic 100 takes the sound from your computer, iPod, TV and other digital devices and adds detail, depth and added clarity to give you a true audio experience.
Generally the digital to analogue converter found in typical digital devices is pretty poor and won’t extract the truest quality of audio from your sources. The DacMagic 100 works by taking a direct digital audio signal from your device to bypass its soundcard or DAC. It then digitally processes the audio signal using our custom designed technology, dramatically improving sound quality and reducing distortion. This results in greater detail, sparkling clarity and a deeper scale to all of your audio.
Digital to analogue converter
Wolfson WM8742 24-bit DAC
Frequency response
20Hz to 20kHz (±0.1dB)
THD @ 1Khz 0dBFs
| High Grade DAC - Digital / Optical to Analogue Stereo Audio Converter - SPDIF - TOSlink / Coaxial to Stereo Left / Right RCA
This analog digital audio converter is designed for home and professional audio conversion. Converts Toslink coaxial or optical digital audio signals into analog L / R audio signals for connection to an external device such as an amplifier via standard RCA connectors. The main features that allow us to be used even in professional contexts are:
- Supports sampling rate at 32.44.1.48 and 96 KHz.
- 24-bit S / PDIF incoming bit stream on the left and right channels.
- Converts coaxial or Toslink digital audio signals into analog L / R audio.
- Provides transmission of signals free of electromagnetic disturbances.
- Easy to install and easy to use.
Content of the package
- Main unit (analog digital audio converter)
- 5V / DC power supply.
- User Manual
|
Portable USB-DAC and headphone amplifier DA-10 provides Denon's audio performance on par with top sound systems of separate devices in a compact size and equipped with high-capacity rechargeable lithium-ion battery of 3200 mAh, for many hours listening pleasure anywhere, even on the road.
Excellent audio performance from your digital music sources
With many mobile devices, headphone amplifier section is mostly designed for low power consumption for extending battery life. While this is satisfactory with normal headphones with top type headphones, the sound performance suffers.
The DA-10 features advanced analog output stage, with the possibility of treatment of a very wide range of types of headphones, including top type models headset and studio-quality headphones, which are often high impedance and require more power than the output stage.
A mounted sideways gain switch allows you to adjust the gain of the output stage for a perfect combination with your favorite top headphones, including high impedance models, and the final analog output module has a separate power cache circuit for perfect listening experience. There is also the possibility steady output for connection to an external audio system.
High quality audio technologies
Located in an elegant aluminum chassis with solid volume slider aluminum alloy, the DA-10 is equipped with Denon's exclusive technologies for superior music listening experience. With the most sophisticated converting digital signal to analog, the DA-10 is equipped with a heading reference Burr-Brown PCM-1795 32-bit high resolution DAC chip, that can treat multiple sampling frequencies up to 192 kHz, and bit depths up 24 bits. The DA-10 can also decode high-resolution DSD audio tracks (the type found on SACDs), and has the ability to decode DSD files 2.8 and 5.6 MHz.
The AL32 proprietary technology Denon using our inventive DSP digital filtering, sampling upwardly and processing algorithms for converting upwardly and patterning high-resolution digital audio noise at 32 bits, providing drastically improved low-level details and disappearance deformation.
Design Net for music lovers
Equipped with Class Reference Burr-Brown PCM-1795 DAC chip, the DA-10 has a leading manufacture for music lovers, including dual master clock crystals, each optimized for specific sampling frequencies and located right next to the DAC chip on the sound board for maximum reduction in distortion. The digital section features asynchronous treatment USB signal for maximum stability and sound quality, and the DA-10 is equipped with the exclusive Denon AL32 advanced DSP digital filtering and shaping-noise, providing the highest resolution possible with current HD tracks.
There are separate circuit cards for digital audio portion and the power portion for avoiding interference between the steps, and the portion of the D / A converter is capable of decoding the wider range of sampling frequencies (up to 192 kHz) and bit depths (up to 24 bits ).
Compatibility with a wide range of Mobile Devices
The DA-10 is available with many connecting cables for compatibility with the widest variety of portable music players and smartphones. The USB-30 pin cable is compatible with many devices of Apple, including iPod, iPod touch, iPhone and iPad. The USB-Lightning cable is compatible with newer devices of Apple, including the iPhone 5 and 6, iPad Air, and other models with the wiring Lighting.
There is also, USB-micro "B" connector for compatibility with other smart devices, and is also included analog stereo 3.5mm-3.5mm cable to connect to a headphone output of a player, the cables with angled plug for secure connection.
Add and digital connectivity to an existing Hi-Fi system
At home, the DA-10 can still make your analogue Hi-Fi digital-compatible system. Connect the constant-level analog output of the DA-10 to the analog input of your Hi-Fi amplifier, then digital streaming music from your PC via micro USB-B input at high resolution up to 192kHz / 24bit or DSD64 (2.8MHz ) and DSD128 (5.6 MHz).
Long Lasting Battery Life with Battery Indicator
Featuring a high-capacity rechargeable lithium-ion battery of 3200 mAh, the DA-10 provides up to seven hours of continuous operation when connected to your portable music player or smartphone via USB. The multi-charging indicator function with LED lets you know the current battery charge level with the opening. When the battery is between 50% and 100%, flashing green. When the battery level falls between 20% and 49%, the LED blinks orange, and when the level falls below 20%, the LED changes to red, indicating that it is time to recharge.
When connected to a portable player through port 3.5mm, the battery life can be up to 24 hours. The recharge time can be short up to 3.5 hours when plugged into a USB charger with output of 1.5 A.
Sleek and Convenient Carrying Case
The included carrying case has a stylish design and includes two internal pockets for the DA-10 and your portable player or smartphone. The housing accommodates the portable device you have translucent plastic film, so that you can see and directly manipulate your device, there are safety belts to live everything in place. When folded closed, the carrying case also provides protection from mistreatment and even provides some protection against the elements.
With the portable USB-DAC and headphone amplifier DA-10 of Denon, your music will never sound better, and you can enjoy unchanged fidelity to the top headphones can provide. | Phono preamplifier with A/D converter and USB output
Record Box E: Pure vinyl listening pleasure plus recording functionality!
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
- Amplification and RIAA equalisation for MM & MC
- Design principle inspired by Dr. Sykora
- Digitalisation of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed
- Runs on Windows®, Mac OS® & Linux operating systems
- SMD circuitry with special low noise components
- Internal metal shielding
- Small size allows installation close to record player
- Gold plated RCA connection sockets
- Outboard power supply included
- Black or White casing
Input capacitance/input impedance |
MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC) |
Gain, MM / MC |
40 dB / 60 dB |
Output voltage typically |
300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC) |
Max. output |
9,5 V (1 kHz) |
Noise floor MM / MC |
94 dB (A weighted) / 75 dB (A weighted) |
THD MM / MC |
<0,01% / <0,05% |
RIAA-equalisation curve accuracy |
20 Hz - 20 kHz / max. 0.5 dB |
A/D converter |
Burr Brown PCM2904 16-Bit Delta Sigma |
Sampling rates |
32, 44,1 and 48 kHz |
USB output |
5 pin Mini b Buchse |
USB signal |
digital serial data protocol USB 1.1 |
Operating systems |
Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux |
Input / Line output |
1 pair RCA/Cinch sockets each |
Outboard power supply |
18 V / 500 mA DC, suitable for your country's mains supply |
Power consumption |
100 mA DC |
Dimensions W x H x D (D with sockets) |
120 x 32 x 100 (115) mm |
Weight |
250g without power supply |
|
ARTSOUND VD-238 VGA Video and RCA Audio Converter TO HDMI
This compact VGA with Audio to HDMI Converter enables you to convert a VGA video signal and separate RCA audio signal to an HDMI output, and in this way connect your VGA/RCA sources to an HDMI display for a full audiovisual experience.
On output, the converter supports resolutions up to Full HD 1080p and computer resolutions up to 1600 x 1200. It converts the input resolution to the closest output resolution.
Key Features
- Convert VGA and L/R RCA signals to an HDMI output
- VGA and L/R RCA inputs
- HDMI output
- Embeds L/R RCA audio into the HDMI output
- Supports output resolutions up to 1080p and 1600 x 1200
- Supports data rates up to 6.75 Gbps
Input |
1 x VGA 1 x L/R RCA |
Output |
1 x HDMI 1.2a |
Input Video Signal |
0.5 - 1.0 V p-p |
Input DDC Signal |
5 V p-p (TTL) |
Supported Input Resolutions |
640 x 480 at 60 / 75 Hz 800 x 600 60 / 75 Hz 1024 x 768 60 / 75 Hz 1280 x 720 60 / 75 Hz 1280 x 768 60 / 75 Hz 1280 x 960 60 / 75 Hz 1280 x 1024 60 / 75 Hz |
Supported Output Resolutions |
480i, 576i, 480p, 576p, 720p, 1080i, 1080p
Computer Resolutions: up to 1600 x 1200 (if available on the HDMI display)
*The input resolution is automatically converted to the closest output resolution. |
Frequency |
Up to 165 MHz |
Video Amplifier Bandwidth |
1.65 Gbps |
Power Supply |
5 VDC, 1 A |
Power Consumption |
5 W |
Operating Temperature |
32 to 158°F (0 to 70°C) |
Storage Temperature |
14 to 176°F (-10 to 80°C) |
Operating Humidity |
10 to 85% RH (no condensation) |
Storage Humidity |
5 to 95% RH (no condensation) |
Dimensions |
3.5 x 1 x 2.7" (8.9 x 2.5 x 6.9 cm) |
Weight |
0.24 lb (109 g) |
|
Reviews
There are no reviews yet.