| Content |
The nano iDSD Black Label is for those who enjoy great music on-the go.
From your phone, amplify your Spotify, Apple Music or Tidal using an Apple CCK cable or OTG cable for Android.
At home or in the office, use the USB3.0 cable provided to connect to your PC.
Res’ing it up!
The nano iDSD Black Label plays Hi-Res audio up to DSD256
so you can enjoy your tunes in the original format just as the artists intended.
Getting into MQA The nano BL is MQA ready. Use it with Tidal Masters on your computer or mobile.
The mighty nano
The nano iDSD Black Label is small but mighty with 10x more amplification power than an iPhone.
It can drive most headphones and has our iEMatch technology built-in, so it can work with In-Ear-Monitors (IEMs).
The in-built iFi iPurifier means it delivers clean, quality music with no buzz, no hiss and no fuss!
Brilliant balancing act
The iFi exclusive S-Balanced circuit provides all the benefits of balanced outputs such as low-noise and less distortion when used with headphones and IEMs fitted with balanced wiring.
For single-ended headphones, S-Balanced cuts crosstalk in half. The benefits are ‘clearly’ audible.
Listen. Measure.
Fancy getting technical? The nano BL has a Listen option (Minimum Phase Bezier Filter) and a Measure option (Linear Phase Transient-Aligned Filter) for those who like to try a variation to the playback.
We say just switch it on, plug in your device, and listen away.
There is no going wrong with 10 hours of battery life.
The Burr-Brown True Native® chipset means file formats remain unchanged. Listen to music as the artist intended in the format in which it was recorded.
Hi-Res True Native® playback of all music formats from MP3 to DSD256, PCM384 and DXD384.
Listen to Master Quality Authenticated audio straight out of the box. Connect to Tidal Masters and check the option to stream MQA.
Our video tutorials on You Tube show you how.
iFi’s exclusive S-Balanced® circuit delivers maximum performance from single-ended and balanced headphones alike.
See our Tech Note to dig deeper.
This precise, analogue volume control is normally found on items at a much higher price point. Its transparent sonic nature delivers a smooth sound with no loss in music retrieval. It delivers the sonic goods.
Zero Jitter® equals good audio. Is it essential to have a very precisely buffered digital signal before it goes to a DAC.
We pushed the envelope even further by doing this not only with the nano iDSD BL\'s USB input, but the rest of the digital interfaces as well.
This unit has up to 10 hours of non-stop playing time. Always make sure you switch it on first and then plug in your device.
|
General
|
|
| Input(rear): |
USB2.0 type A ‘OTG’ Socket (with iPurifier® technology built-in) |
| Output(rear)； |
1 x audio fixed line out L+R 3.5mm |
| Digital Filter: |
2 positions. 2 filters |
| Outputs(front): |
2 x 3.5mm headphone audio outputs. ‘Direct’ and ‘iEMatch®’ |
|
DAC
|
|
| DAC: |
DSD, DXD, PCM DAC by Burr Brown Bit-Perfect DSD processing, Bit-Perfect DXD processing |
| Clock: |
Low-jitter crystal clock |
| Audio Formats: |
DSD 256/128/64/12.4/11.2/6.2/5.6/3.1/2.8 |
|
DXD 384/352.8kHz |
|
PCM 384/352.8/192/176.4/96/88.2/48/44.1kHz |
|
MQA 88.2/96/176.4/192kHz filters |
| Filter–PCM: |
Listen (transient optimised minimum phase) |
|
Measure (frequency response optmised) |
| –DSD: |
Listen (extended bandwidth transient optimised) |
|
Measure (narrow bandwidth, low output band noise optimised) |
| –DXD: |
Fixed Bit-Perfect Processing |
| –MQA: |
Fixed MQA Filter |
|
Headphone Amplifier
|
|
| Amplifier: |
Dual Mono 2 x 285mW Direct Drive, coupling capacitor free circuit for highest fidelity |
| Volume Control: |
3.5mm TRRS with Balanced compatible wiring |
| Dynamic Range(including DAC): |
> 109dB(A) @ 3v (Direct) |
|
> 107dB(A) @ 0.5V (iEMatch®) |
| THD &N (@ 125mW/30R): |
< 0.005% |
| Max. Output ( 3.5V @ 600Ω Load (Direct) (20mW/600Ω) |
|
> 2.9V @ 30Ω Load (Direct) (285mW/30Ω) |
|
> 1.7V @ 15Ω Load (Direct) (200mW/15Ω) |
| Output Impedance : |
< = 1Ω (Direct) |
|
< = 4Ω (iEMatchsup>®) |
| Channel Separation: |
> 79dB @ 600Ω Load (Direct) |
|
> 79dB @ 15Ω Load (Direct) (1kHz, TRRS plug Balanced wiring) |
|
Line Output
|
|
| Dynamic Range(Line): |
> 109dB(A) |
| THD & N(0dBFS Line): |
< 0.004% |
| Output Voltage(Line): : |
2.15V (+/-0.05V) |
| Output Impedance: |
< 240Ω |
| Channel Separation: |
> 99dB (@ 1kHz) |
| Jitter(correlated): |
Below test set limit |
| Dimensions: |
96(l) x 64(w) x 25.5(h)mm |
| Weight: |
139g (0.31 Ibs) |
| Warranty period: |
12 months |
| The Audioengine D3 Premium 24-bit DAC (digital-toanalog converter) allows you to bypass your
computer's headphone output and send music
directly through a USB port for noticeably improved
fidelity and a higher output.
Portable USB audio converter for Mac or PC
Stream bit-perfect native 24/96 HD audio
High-performance headphone amp included
Plug-and-play, no drivers or software to install
Connect headphones or any music system
Easily drives low impedance headphones
Computer OS volume control
Asynchronous data transfer with dual master clocks
HD indicator for sample rates above 48K
Metal injection molded (MIM) aluminum case |
The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.
Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?
32bit D/A Converter USB Bus power without using unwanted AC adapterWorks with up to 24bit/96kHz audio sourceHigh quality analog headphone amp to drive any type of headphonesEquipped with high-grade AKM 32bit DAC AK4390 - USB Bus power without using unwanted AC adapter
- Works with up to 24bit/96kHz audio source
- Exclusive PLL power supply is built in to reproduce the stable electrical supply
- High quality analog headphone amp to drive any type of headphones
- Equipped with hgih-grade AKM 32bit(*) DAC AK4390
- Condensers and OP amp designed exclusively for audio products
- USB / Digital (Optical) input selector
- Headphones / RCA (Analog) output selector
- Doubles as D/D converter from USB digital audio to Optical
- An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter
Note: When using the USB input, the sampling frequency is fixed at 96kHz. Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.
Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)
Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)
General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g
|
- With 2.4G WiFi, Mirascreen G7M wireless display dongle is powered by brand-new chipset AM8268. Provides faster reaction speed and stable performance.
- Support mirroring and streaming your mobile devices to TV or projector or any HD display wirelessly. Turn your HDTV into a smart TV, use your mobile devices as the controller.
- Works with smartphones and tablet, suitable for Android and iOS OS. You can enjoy wireless display with your smart devices.
- Suitable for Miracast, DLNA, for Airplay to sync cast photo, video, music, office files, web browser, live camera from for iPhone and Android smart phone or tablet PC to large screen TV or Projector via WiFi, designed for PowerPoint presentation and video meeting.
- With HD interface, supports 1080P ultra HD wireless video transmission. Bring you ultra-clear visual enjoyment.
| 4K Digital Media HD HDR Video Streamer Player HDTV WiFi HDMI For Chromecast Chrome Cast Ultra
- EASY TO USE: No application or driver required. Only 3 steps to enjoy the media on the big screen: Plug-> Connect-> Mirroring/casting. Support DLNA / Airplay / Miracast / Chrome.
- POWERFUL MULT-COMPATIBILITY: Absolutely casted/mirrored with photos, video, radio, music, office document, live camera, online chat, movies, games to HDTV, projector or monitor which has HD input socket from IPhone, laptop, IPad, Macbook, tablets, Android smart phones.
- HIGH DEFINITION OUTPUT: HDMI port support 1080P video output and High-quality Sound Effect output. You can connect PC, smartphone or iPad to TV or projector, whatever you see on your mobile device's display, you can mirror onto the HDTV or projector, create your own exclusive cinema, enjoy different audio-visual feast.
- ONLINE UPGRADE: If dongle is on network mode, it will upgrade automatically when there is a new version on the dongle server.
- Android Support Chrome for Netflix/Youtube/ Hulu/ Spotify/ HBONOW/ CBS/ PANDORA/ JUST DANCE by screen mirroring ,Other apps can be worked by casting or mirroring.
Enjoy ultra-high-resolution content with the Ultra 4K Streaming player. This device plugs into your TV or home theater receiver’s HDMI port, enabling you to stream media from your mobile device or the web. It supports video with 4K Ultra HD (3840 x 2160) resolution for use with compatible displays. It connects to your home network via 802.11ac Wi-Fi or the included Ethernet adapter. Set it up with the free mobile app, then send your favorite online shows, movies, music, and more to your TV using your smartphone, tablet, or laptop. 4K and HDR Support
4K UHD’s high resolution enables improved clarity over 1080p Full HD while HDR provides deep, rich colors. Note: To view content in 4K or HDR, a 4K- or HDR-capable display and reliable broadband internet connection are also required. Remote Control from Your Device
Just tap the Cast button in mobile apps and websites you already use to start casting right to your TV. Use your phone, tablet, or laptop to play, pause, and adjust the volume; all without draining your battery Entertainment Apps
Works with popular apps you like Netflix, YouTube, Google Play, Pandora, and more, enabling you to choose your favorite movies, TV shows, songs, sporting events, and games. Note: 4K not available on all apps. Some apps require subscriptions. Mirror Your Android Phone or Browser
See anything on your Android phone or tablet on your TV’s larger screen, or use your laptop to cast any website from the browser. If it’s online, you can cast it. Dual-Band Wi-Fi Connectivity
Designed to keep video resolution high and buffering low thanks to integrated 2.4 and 5 GHz Wi-Fi support and a built-in 1×2 SIMO antenna system. Size:Diameter 56 mm*Thickness 10 mm*Line length 8 cm |
Super DAC is a USB digital to analog converter with stereo RCA analog outputs and both coaxial and optical digital outputs. With audiophile-grade Wolfson DAC/ADCs, the M-Audio Super DAC performs 24-bit/192kHz high-definition audio conversion over a USB 2.0 connection. This results in the highest possible audio quality, which is critical for users who want to connect their audio equipment to their computer but are not satisfied with the sound quality of the typical computer sound card or the compression limitations of a Bluetooth connection. Six sampling rates between 44.1 and 192kHz are user selectable so you can achieve the exact performance level needed for any given circumstance.
Super DAC has a built-in high quality headphone amplifier with both ¼-inch and 1/8-inch jacks, for connecting any headphones directly without the need for an adapter. It also features analog stereo RCA line outs and coaxial and optical digital output connections, so you can easily connect a wide array of external equipment. Since virtually all high-quality audio equipment has a digital input, Super DACʼs optical and coaxial digital outputs are perfect for driving that equipment with a pure digital signal—especially valuable since most computers do not have a digital output.
Super DAC is USB-bus-powered or can use an optional AC wall adapter (not included). The M-Audio Super DAC is the answer when you require reference-quality sound from your computer.
Features - 24-bit/192kHz high-definition audio conversion over a USB 2.0 connection
- High-quality headphone amplifier with 1/4" and 1/8" outputs
- Stereo analog line in
- Stereo analog RCA line outputs
- Coaxial and optical digital outputs
- Wolfson digital conversion
- USB-bus-powered
Requirements - Windows XP - Windows 10 Compatible
- OSx 10.7.5 - 10.11 Compatible
|
Reviews
There are no reviews yet.