ifi Audio nano iDSD BL (Black Label) Portable DAC/ Headphone amplifier

No longer available!

239.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
The nano iDSD Black Label is for those who enjoy great music on-the go. From your phone, amplify your Spotify, Apple Music or Tidal using an Apple CCK cable or OTG cable for Android. At home or in the office, use the USB3.0 cable provided to connect to your PC. Res’ing it up! The nano […]

 

Read more

The nano iDSD Black Label is for those who enjoy great music on-the go.

From your phone, amplify your Spotify, Apple Music or Tidal using an Apple CCK cable or OTG cable for Android.

At home or in the office, use the USB3.0 cable provided to connect to your PC.

Res’ing it up!

The nano iDSD Black Label plays Hi-Res audio up to DSD256
so you can enjoy your tunes in the original format just as the artists intended.

Getting into MQA The nano BL is MQA ready.  Use it with Tidal Masters on your computer or mobile.

The mighty nano

The nano iDSD Black Label is small but mighty with 10x more amplification power than an iPhone.

It can drive most headphones and has our iEMatch technology built-in, so it can work with In-Ear-Monitors (IEMs).

The in-built iFi iPurifier means it delivers clean, quality music with no buzz, no hiss and no fuss!

Brilliant balancing act

The iFi exclusive S-Balanced circuit provides all the benefits of balanced outputs such as low-noise and less distortion when used with headphones and IEMs fitted with balanced wiring.

For single-ended headphones, S-Balanced cuts crosstalk in half. The benefits are ‘clearly’ audible.

Listen. Measure.

Fancy getting technical? The nano BL has a Listen option (Minimum Phase Bezier Filter) and a Measure option (Linear Phase Transient-Aligned Filter) for those who like to try a variation to the playback.

We say just switch it on, plug in your device, and listen away.

There is no going wrong with 10 hours of battery life.

The Burr-Brown True Native® chipset means file formats remain unchanged. Listen to music as the artist intended in the format in which it was recorded.

Hi-Res True Native® playback of all music formats from MP3 to DSD256, PCM384 and DXD384.

Listen to Master Quality Authenticated audio straight out of the box. Connect to Tidal Masters and check the option to stream MQA.

Our video tutorials on You Tube show you how.

iFi’s exclusive S-Balanced® circuit delivers maximum performance from single-ended and balanced headphones alike.

See our Tech Note to dig deeper.

This precise, analogue volume control is normally found on items at a much higher price point. Its transparent sonic nature delivers a smooth sound with no loss in music retrieval. It delivers the sonic goods.

Zero Jitter® equals good audio. Is it essential to have a very precisely buffered digital signal before it goes to a DAC.

We pushed the envelope even further by doing this not only with the nano iDSD BL\’s USB input, but the rest of the digital interfaces as well.

This unit has up to 10 hours of non-stop playing time. Always make sure you switch it on first and then plug in your device.

General
Input(rear): USB2.0 type A ‘OTG’ Socket (with iPurifier® technology built-in)
Output(rear); 1 x audio fixed line out L+R 3.5mm
Digital Filter: 2 positions. 2 filters
Outputs(front): 2 x 3.5mm headphone audio outputs. ‘Direct’ and ‘iEMatch®’
DAC
DAC: DSD, DXD, PCM DAC by Burr Brown Bit-Perfect DSD processing, Bit-Perfect DXD processing
Clock: Low-jitter crystal clock
Audio Formats: DSD 256/128/64/12.4/11.2/6.2/5.6/3.1/2.8
DXD 384/352.8kHz
PCM 384/352.8/192/176.4/96/88.2/48/44.1kHz
MQA 88.2/96/176.4/192kHz filters
Filter–PCM: Listen (transient optimised minimum phase)
Measure (frequency response optmised)
       –DSD: Listen (extended bandwidth transient optimised)
Measure (narrow bandwidth, low output band noise optimised)
       –DXD: Fixed Bit-Perfect Processing
       –MQA: Fixed MQA Filter
Headphone Amplifier
Amplifier: Dual Mono 2 x 285mW Direct Drive, coupling capacitor free circuit for highest fidelity
Volume Control: 3.5mm TRRS with Balanced compatible wiring
Dynamic Range(including DAC): > 109dB(A) @ 3v (Direct)
> 107dB(A) @ 0.5V (iEMatch®)
THD &N (@ 125mW/30R): < 0.005%
Max. Output ( 3.5V @ 600Ω Load (Direct) (20mW/600Ω)
> 2.9V @ 30Ω Load (Direct) (285mW/30Ω)
> 1.7V @ 15Ω Load (Direct) (200mW/15Ω)
Output Impedance : < = 1Ω (Direct)
< = 4Ω (iEMatchsup>®)
Channel Separation: > 79dB @ 600Ω Load (Direct)
> 79dB @ 15Ω Load (Direct) (1kHz, TRRS plug Balanced wiring)
Line Output
Dynamic Range(Line): > 109dB(A)
THD & N(0dBFS Line): < 0.004%
Output Voltage(Line): : 2.15V (+/-0.05V)
Output Impedance: < 240Ω
Channel Separation: > 99dB (@ 1kHz)
Jitter(correlated): Below test set limit
Dimensions: 96(l) x 64(w) x 25.5(h)mm
Weight: 139g (0.31 Ibs)
Warranty period: 12 months
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “ifi Audio nano iDSD BL (Black Label) Portable DAC/ Headphone amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

ifi Audio nano iDSD BL (Black Label) Portable DAC/ Headphone amplifier removePRO-JECT AUDIO BLUETOOTHE BOX E Receiver White removeARTSOUND VD-275 CONVERTER ANALOG AUDIO RCA TO DIGITAL COAXIAL/OPTICAL With power adapter removePro-Ject Audio Record box E MM-MC USB PHONO RIAA PREAMPLIFIER White removeNorth Star EXTREMO Digital Analog Converter removeRME ADI-2 Convertor AD/DA remove
Nameifi Audio nano iDSD BL (Black Label) Portable DAC/ Headphone amplifier removePRO-JECT AUDIO BLUETOOTHE BOX E Receiver White removeARTSOUND VD-275 CONVERTER ANALOG AUDIO RCA TO DIGITAL COAXIAL/OPTICAL With power adapter removePro-Ject Audio Record box E MM-MC USB PHONO RIAA PREAMPLIFIER White removeNorth Star EXTREMO Digital Analog Converter removeRME ADI-2 Convertor AD/DA remove
Imagepro-ject-audio-bluetooth-receiver-box-e-converter hi-fiproject audio record box e usb mm mc riaa preamplifier phono white
SKUnano iDSD BLBT BOX E WVD275Record Box E-WEXTREMOJ30RM00012
Rating
Price239.00 incl. GR VAT139.00 incl. GR VAT14.81 incl. GR VAT125.00 incl. GR VAT 2,440.48 incl. GR VAT 665.00 incl. GR VAT
Stock

Out of stock

Only 1 left in stock (can be backordered)

Only 5 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityOut of stockOnly 1 left in stock (can be backordered)Only 5 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Wireless music streaming with almost CD-quality
  • BT 2.1 + EDR
  • Supports aptX & SBC codecs
  • Easy to install and use
  • Fast auto pairing (3 to 5 seconds)
  • Up to 8 different BT sources are memorized
  • Works within a range of approximately 10 meters
  • RCA analogue and Toslink digital outputs (switchable)
  • Outboard power supply included
  • Black or White casing
  • Amplification and RIAA equalisation for MM & MC
  • Design principle inspired by Dr. Sykora
  • Digitalisation of vinyl for recording direct to USB with suitable recording programs
  • Automatic recognition, no additional drivers needed
  • Runs on Windows®, Mac OS® & Linux operating systems
  • SMD circuitry with special low noise components
  • Internal metal shielding
  • Small size allows installation close to record player
  • Gold plated RCA connection sockets
  • Outboard power supply included
  • Black or White casing
Content

The nano iDSD Black Label is for those who enjoy great music on-the go.


From your phone, amplify your Spotify, Apple Music or Tidal using an Apple CCK cable or OTG cable for Android.

At home or in the office, use the USB3.0 cable provided to connect to your PC.


Res’ing it up!

The nano iDSD Black Label plays Hi-Res audio up to DSD256
so you can enjoy your tunes in the original format just as the artists intended.

Getting into MQA The nano BL is MQA ready.  Use it with Tidal Masters on your computer or mobile.


The mighty nano

The nano iDSD Black Label is small but mighty with 10x more amplification power than an iPhone.

It can drive most headphones and has our iEMatch technology built-in, so it can work with In-Ear-Monitors (IEMs).

The in-built iFi iPurifier means it delivers clean, quality music with no buzz, no hiss and no fuss!


Brilliant balancing act

The iFi exclusive S-Balanced circuit provides all the benefits of balanced outputs such as low-noise and less distortion when used with headphones and IEMs fitted with balanced wiring.

For single-ended headphones, S-Balanced cuts crosstalk in half. The benefits are ‘clearly’ audible.


Listen. Measure.

Fancy getting technical? The nano BL has a Listen option (Minimum Phase Bezier Filter) and a Measure option (Linear Phase Transient-Aligned Filter) for those who like to try a variation to the playback.

We say just switch it on, plug in your device, and listen away.

There is no going wrong with 10 hours of battery life.



The Burr-Brown True Native® chipset means file formats remain unchanged. Listen to music as the artist intended in the format in which it was recorded.

Hi-Res True Native® playback of all music formats from MP3 to DSD256, PCM384 and DXD384.

Listen to Master Quality Authenticated audio straight out of the box. Connect to Tidal Masters and check the option to stream MQA.

Our video tutorials on You Tube show you how.

iFi’s exclusive S-Balanced® circuit delivers maximum performance from single-ended and balanced headphones alike.

See our Tech Note to dig deeper.

This precise, analogue volume control is normally found on items at a much higher price point. Its transparent sonic nature delivers a smooth sound with no loss in music retrieval. It delivers the sonic goods.

Zero Jitter® equals good audio. Is it essential to have a very precisely buffered digital signal before it goes to a DAC.

We pushed the envelope even further by doing this not only with the nano iDSD BL\'s USB input, but the rest of the digital interfaces as well.

This unit has up to 10 hours of non-stop playing time. Always make sure you switch it on first and then plug in your device.

General
Input(rear): USB2.0 type A ‘OTG’ Socket (with iPurifier® technology built-in)
Output(rear); 1 x audio fixed line out L+R 3.5mm
Digital Filter: 2 positions. 2 filters
Outputs(front): 2 x 3.5mm headphone audio outputs. ‘Direct’ and ‘iEMatch®’
DAC
DAC: DSD, DXD, PCM DAC by Burr Brown Bit-Perfect DSD processing, Bit-Perfect DXD processing
Clock: Low-jitter crystal clock
Audio Formats: DSD 256/128/64/12.4/11.2/6.2/5.6/3.1/2.8
DXD 384/352.8kHz
PCM 384/352.8/192/176.4/96/88.2/48/44.1kHz
MQA 88.2/96/176.4/192kHz filters
Filter–PCM: Listen (transient optimised minimum phase)
Measure (frequency response optmised)
       –DSD: Listen (extended bandwidth transient optimised)
Measure (narrow bandwidth, low output band noise optimised)
       –DXD: Fixed Bit-Perfect Processing
       –MQA: Fixed MQA Filter
Headphone Amplifier
Amplifier: Dual Mono 2 x 285mW Direct Drive, coupling capacitor free circuit for highest fidelity
Volume Control: 3.5mm TRRS with Balanced compatible wiring
Dynamic Range(including DAC): > 109dB(A) @ 3v (Direct)
> 107dB(A) @ 0.5V (iEMatch®)
THD &N (@ 125mW/30R): < 0.005%
Max. Output ( 3.5V @ 600Ω Load (Direct) (20mW/600Ω)
> 2.9V @ 30Ω Load (Direct) (285mW/30Ω)
> 1.7V @ 15Ω Load (Direct) (200mW/15Ω)
Output Impedance : < = 1Ω (Direct)
< = 4Ω (iEMatchsup>®)
Channel Separation: > 79dB @ 600Ω Load (Direct)
> 79dB @ 15Ω Load (Direct) (1kHz, TRRS plug Balanced wiring)
Line Output
Dynamic Range(Line): > 109dB(A)
THD & N(0dBFS Line): < 0.004%
Output Voltage(Line): : 2.15V (+/-0.05V)
Output Impedance: < 240Ω
Channel Separation: > 99dB (@ 1kHz)
Jitter(correlated): Below test set limit
Dimensions: 96(l) x 64(w) x 25.5(h)mm
Weight: 139g (0.31 Ibs)
Warranty period: 12 months

Bluetooth Receiver

  • Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box E
Effective range of wireless signal up to 10m in case of direct visibility
Line-level output: 1 x RCA/Cinch
Output voltage: 2Vrms
Digital outputs: 1 x optical (TOSlink®)
BT version: 2.1 + EDR
Supported codecs: aptX, SBC, A2DP BT profile
Frequency: 2402 ~ 2480 MHz
Sensitivity: - 84dBm
Maximum TX power +4dBm
Outboard power supply: 9V/300mA DC
Power consumption: 100mA/9V DC,<1W in standby
Dimensions W x H x D (D with sockets): 120 x 32 x 100 mm
Weight: 250g without power supply
Analog to Digital Optical Toslink Audio RCA Converter/Adapter, With power adapter The ARTSOUND new * Analog to Digital Audio Adapter/Converter * converts analog Left/Right RCA-style audio connections to digital S/PDIF coax or TOSLink outputs.The unit is compact, easy to install, and operates in a wide variety of operating conditions. How it works: Simply plug in your analog audio source into the RCA jacks, then connect your digital receiving device ... So you’ve got your entire audio system running Digital (Coax or Toslink) audio, but you’ve got one old piece of equipment with analog output that is gumming up the works? No problem! Just get the Analog to Digital Audio Converter and bring your old equipment into the digital age! This compact little converter has a set of right/left RCA analog audio input jacks. It will simultaneously convert the analog audio into Coax and Optical (Toslink) Digital signals. You can connect either or both outputs to an appropriate digital audio input on a TV, AV receiver, or anything else. The converter has a digital sampling rate of 48 kHz and produces an LPCM stereo audio output signal. It is powered by a 5V DC power adapter, which is included. All the connectors are gold-plated. Note that this converter only works one way – Analog to Digital. It will NOT convert digital signals to analog!

Phono preamplifier with A/D converter and USB output

Record Box E: Pure vinyl listening pleasure plus recording functionality!
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
  • Amplification and RIAA equalisation for MM & MC
  • Design principle inspired by Dr. Sykora
  • Digitalisation of vinyl for recording direct to USB with suitable recording programs
  • Automatic recognition, no additional drivers needed
  • Runs on Windows®, Mac OS® & Linux operating systems
  • SMD circuitry with special low noise components
  • Internal metal shielding
  • Small size allows installation close to record player
  • Gold plated RCA connection sockets
  • Outboard power supply included
  • Black or White casing
Input capacitance/input impedance MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC)
Gain, MM / MC 40 dB / 60 dB
Output voltage typically 300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC)
Max. output 9,5 V (1 kHz)
Noise floor MM / MC 94 dB (A weighted) / 75 dB (A weighted)
THD MM / MC <0,01% / <0,05%
RIAA-equalisation curve accuracy 20 Hz - 20 kHz / max. 0.5 dB
A/D converter Burr Brown PCM2904 16-Bit Delta Sigma
Sampling rates 32, 44,1 and 48 kHz
USB output 5 pin Mini b Buchse
USB signal digital serial data protocol USB 1.1
Operating systems Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux
Input / Line output 1 pair RCA/Cinch sockets each
Outboard power supply 18 V / 500 mA DC, suitable for your country's mains supply
Power consumption 100 mA DC
Dimensions W x H x D (D with sockets) 120 x 32 x 100 (115) mm
Weight 250g without power supply

The Extremo DAC can be connected via S/PDIF
or AES/EBU to any existing digital source like
CD-player, DAT, CD-transport.
A I2S digital input allows a direct link with
M192 CD-transport for the best audio performance.
CS8416 - a very low jitter 192kHz digital receiver from
Cirrus Logic.
AD1896 - an high dynamic 192/24 upsampler from
Analog
Devices 2 x PCM1792 - 140 dB, 192/24 DAC from Texas

The ADI-2 is a both compact and extremely flexible 2-Channel Hi-End AD/DA-converter. The small 9.5' unit offers top notch AD/DA-conversion from/to SPDIF, AES and ADAT, at up to 192 kHz. Its ability to use SPDIF, AES and ADAT format provides outstanding compatibility. Whatever it is - simply get connected! Key features of this extraordinary flexible converter are balanced inputs and outputs, monitoring via headphone out, SteadyClock for optimal converter quality, 3-stage hardware input and output level control, and its capability to run on a wide range of power supplied.

Weight0.50 kg300 kg0.08 kg350 kg6.50 kg3.00 kg
DimensionsN/A12 × 3.2 × 10 cmN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 300 kg
Dimensions 12 × 3.2 × 10 cm
Weight 0.08 kg
Weight 350 kg
Weight 6.50 kg
Weight 3.00 kg