| Content | Cute, compact and stylish
This superb hi-res USB DAC/headphone amp delivers a level of specification and performance that punches above its super-affordable price tag.
Compact enough to use as a USB DAC/amp on your work desk with your much-loved headphones.
Stylish enough to use in your home system as a USB DAC. Just add your favourite active speakers or amp.
DAC to the future
The ZEN DAC supports PCM and DXD to 32-bit/384kHz, DSD256 and MQA. DSD remains ‘bit-perfect’ thanks to the True Native Burr Brown chip design.
Our R&D maxes out the circuitry with bespoke, easy to install firmware to bring you the joyous musicality of hi-res. The ethereal music quality will leave you grinning ear to ear.
Brings balance (in more ways than one)
We’ve used a balanced design for the analogue stage – rare and not found at this price point. This makes it pretty special for the best sound quality. With super-low noise performance, it will remain quiet even in noisy situations such as yachts or RVs.
The ZEN DAC sports Pentaconn 4.4mm balanced outputs at both the front and back. On the front, there’s also the popular 6.3mm headphone socket. You get both headphone options.
So flexible it almost does yoga
Switch effortlessly between ‘variable’ and ‘fixed’.
Set to ‘Variable,’ use the ZEN DAC as a pre-amp to feed a power amp or active speakers.
On ‘Fixed’ to bypass the volume control. Connect to an external pre-amp or integrated amp.
Power. Drive. Performance.
Our headphone amp has PowerMatch – switchable gain to perfectly match your headphones.
IEMs are high-sensitivity, Leave PowerMatch at its lower setting for hiss-free listening.
On/over-ear types with relatively low impedance require more oomph – press PowerMatch to increase the level of drive.
Ace of Bass.
The ZEN DAC boasts TrueBass. This proprietary tech is a switchable ‘bass boost’ operating in the analogue domain. There’s no DSP with iFi gear.
TrueBass enhances the bass but does not muddy the mid-range. Perfect for use with IEMs or open-back headphones which often lose out on bass.
So, in the words of the great Eric Clapton and from the film Back to the Future, Heaven is One Step Away.
| Input |
USB3.0 B Socket (USB2.0 compatible) |
| Formats |
DSD256/128/64, Octa/Quad/Double/Single-Speed DSD DXD(384/352.8kHz), PCM(384/352.8/192/176.4/96/88.2/48/44.1kHz) MQA |
| DAC |
Bit-Perfect DSD & DXD DAC by Burr Brown |
|
Line Section
|
|
| Output |
Audio RCA (SE) — 2.1V fixed 1V / 3.3V max. (variable) 4.4mm Pentaconn (BAL) — 4.2V fixed 2V / 6.2V max. (variable) |
| Zout |
113dBA (6.2V BAL/3.3V SE) |
| Power consumption |
< 1.5W via USB power OR 5v DC (power supply not included) |
| Dimensions |
117(l) x 100(w) x 30(h)mm |
| Weight (Gross) |
0.8 kg (1.8 lbs) |
| Warranty period |
12 months |
| ARTSOUND VD-RK3036 Dongle HDMI Wireless Display Adapter to Connect Android & iOS to TV-Wifi Display Dongle HDMI MiraScreen G2
-WiFi frequency: 2.4GHz
-WiFi range: 10m and less
-WiFi module / version: 8188FTV
-Resolution: 1920 x 1080 ( max )
-Operating system: Linux
-CPU version / processor: AM8252B
-CPU speed: 600MHz
-RAM: DDR3 128Mb
-Internal flash: SLC 128MB
-Video format: AVI, DIVX, MKV, DAT, VOB, MPG, MPEG, MOV, MP4, RM, RMVB, WMV
-Picture format: JPEG, BMP
-Audio format: MP1 / 2 / 3, WMA, OGG, WAV, AAC
-File format: Adobe PDF, Microsoft Word / Excel / PowerPoint
MiraScreen G2 TV Stick Dongle Anycast Crome Cast HDMI WiFi Display Receiver Miracast
Google Chromecast 2 Mini PC Android TV
MiraScreen G2 wireless HDMI dongle has customized design which relaxes you from the tired
daily life.
With MiraScreen G2, you can enjoy your favorite videos, photos and movies on the best display
in the house.
Simply connect the tiny adapter to your HDTV and you can wirelessly display content from a
compatible laptop, tablet, or smartphone. Anything you can see on your laptop or tablet, you
can see on your HDTV.
Perfect for home or on-the-go, just take it with you to enjoy advanced technology.
Main features:
-High-definition image
Support 1080P, you can connect PC, smartphone or iPad to TV or projector, whatever you see
on your mobile device`s display, you can mirror onto the HDTV or projector, create your own
exclusive cinema, enjoy different audio-visual feast
-Broad compatibility
Compatible with Android 4.2, Mac OS X 10.9, iOS 7.0, Windows 8.1. Play games or share photos
and videos with your family on big screen, without having to huddle around the tiny screen of
a mobile device. Also, support multiple formats of photos, videos and files, out of the shackles
of cable, the meeting has become intelligent and efficient
-Small and light design
Rounded cute size, just like a cookie, with a magnet connected the HDMI cable on the back,
which saves the space so that it is portable for you to use it anytime and anywhere
-Easy connection
Just plug and play, no needed any other drivers, and with a switching button, you could switch
Airplay mode or Miracast mode easily
Note: Smile The Tv Stick did not support Netflix. Thanks
In order the TV stick with a good performance ,please make sure use 5V2A Adapter for the TV
stick Power Supply!! | Analog to Digital Optical Toslink Audio RCA Converter/Adapter, With power adapter
The ARTSOUND new * Analog to Digital Audio Adapter/Converter * converts analog Left/Right RCA-style audio connections to digital S/PDIF coax or TOSLink outputs.The unit is compact, easy to install, and operates in a wide variety of operating conditions.
How it works:
Simply plug in your analog audio source into the RCA jacks, then connect your digital receiving device ...
So you’ve got your entire audio system running Digital (Coax or Toslink) audio, but you’ve got one old piece of equipment with analog output that is gumming up the works? No problem! Just get the Analog to Digital Audio Converter and bring your old equipment into the digital age!
This compact little converter has a set of right/left RCA analog audio input jacks. It will simultaneously convert the analog audio into Coax and Optical (Toslink) Digital signals. You can connect either or both outputs to an appropriate digital audio input on a TV, AV receiver, or anything else.
The converter has a digital sampling rate of 48 kHz and produces an LPCM stereo audio output signal. It is powered by a 5V DC power adapter, which is included. All the connectors are gold-plated.
Note that this converter only works one way – Analog to Digital. It will NOT convert digital signals to analog! |
The ADI-2 is a both compact and extremely flexible 2-Channel Hi-End AD/DA-converter. The small 9.5' unit offers top notch AD/DA-conversion from/to SPDIF, AES and ADAT, at up to 192 kHz. Its ability to use SPDIF, AES and ADAT format provides outstanding compatibility. Whatever it is - simply get connected! Key features of this extraordinary flexible converter are balanced inputs and outputs, monitoring via headphone out, SteadyClock for optimal converter quality, 3-stage hardware input and output level control, and its capability to run on a wide range of power supplied. |
- With 2.4G WiFi, Mirascreen G7M wireless display dongle is powered by brand-new chipset AM8268. Provides faster reaction speed and stable performance.
- Support mirroring and streaming your mobile devices to TV or projector or any HD display wirelessly. Turn your HDTV into a smart TV, use your mobile devices as the controller.
- Works with smartphones and tablet, suitable for Android and iOS OS. You can enjoy wireless display with your smart devices.
- Suitable for Miracast, DLNA, for Airplay to sync cast photo, video, music, office files, web browser, live camera from for iPhone and Android smart phone or tablet PC to large screen TV or Projector via WiFi, designed for PowerPoint presentation and video meeting.
- With HD interface, supports 1080P ultra HD wireless video transmission. Bring you ultra-clear visual enjoyment.
| ”It makes a handsome difference to your on-the-go sound.” ’What Hi-Fi?’ 2019 award-winner.
Improve the sound of your smartphone
The Cyrus soundKey uses a top quality DAC (Digital to Analogue Convertor) built into an ultra-low power circuit that lets you hugely improve the sound of your smartphone or tablet without rapidly draining the battery. Using a much better DAC than the one built into most smartphones and tablets means music sounds more dynamic, detailed and true-to-life.
Compatible with Hi-Res music files
A further bonus with the soundKey is that it’s compatible with Hi-Res music files up to 24 bit/96kHz. This means that, as well as MP3 and AAC files, it will also replay your Hi-Res FLAC files. Hi-Res makes the music sound more natural, with subtle detail easier to detect.
Ultra-low power consumption
A key advantage with this DAC over others is the extremely low power consumption. With a battery drain of less than 50 milliamps – under half the maximum recommended by Apple for use with their iOS devices – the soundKey is kind to your phone’s battery. What this means is a much longer phone battery life than when using other mini-DACs. The device itself is also battery-free.
Works with Windows 10, Android 5+ and iOS9+
Compatible with Windows, Android and Apple devices the soundKey is suitable for just about any smartphone. Simply make sure you have the correct USB OTG (On The Go) connection (Apple Camera Kit connection for Apple iOS devices) and you’re good to go.
Compact, robust and light
Crafted using high quality brushed aluminium, the soundKey is both lightweight and strong. Its sleek design combined with its compact dimensions and mere 18g weight make it perfect for music on the move.
Unlock the key to great sound from your smartphone, with the Cyrus soundKey.
Brand Cyrus
Colour Graphite
USB Yes
Weight (KG) 18.1g
Bluetooth No
Dimensions WxDxH (mm) 23 x 8 x 54
High Resolution Audio Yes
Power Consumption- Normal Use Under 50mA
Optical Digital Inputs No
DAC Texas Instruments PCM5102 |
Reviews
There are no reviews yet.