MC2 Audio E45 POWER AMPLIFIER 2x2500W 4ohm 230V

The E Series is a range of lightweight, high-power switch mode amplifiers designed to the highest standards of reliability and sound quality. Developed for the touring market, E Series retain the sonic integrity of the benchmark MC and T Series amplifiers, without the physical weight.

The switch mode power supply is capable of delivering high peaks without any perceptible bass 'sag' at very low distortion and is kept within its safe operating area by the new, sophisticated MC² Audio 'intelligent' limiter. The E15, E25, E45 and E4-75 feature MC² Audioʼs proprietary current driven output stages for ultra-high definition sound, delivered over the entire audio bandwidth.

The E90 and the E100 are Class D amplifiers designed to meet the demands for higher power with increased efficiency whilst still maintaining the renowned MC² Audio sonic qualities and unsurpassed reliability.

All MC² Audio products are covered by a 5 year warranty.


Number of Channels: 2

Frequency Response:

20Hz to 20kHz
(+/- 0.3dB)


Output Power: (per channel)

8 ohms 1250W
4 ohms 2500W
2 ohms 4200W

Output Power: (bridged)

8 ohms 5000W
4 ohms 8400W

THD%: (@1dB below max output)

@ 1kHz 20Hz to 20kHz
Gain / Sensitivity:

Gain 26/32/33dB

Sensitivity (for max power) dBu +15.7/9.7/5.7 (4.7/2.4/1.5V)



Power Consumption:

Nominal @ 240v into 4 ohms 4.5A

Nominal @ 120v into 4 ohms 9.0A


Dimensions: (2U) (mm)

Amplifier 88(h) x 482(w) x 428(d)
Single Box (UK shipping) 230 x 580 x 560
Double Box (outside UK) 250 x 610 x 600

Weight:

Amplifier 11.4kg
Boxed (shipping weight) 13.4kg

Απαιτήσεις ισχύος: 1/8 ισχύος στα 4Ω

• -100V AC: 6.2A
• -120V AC: 5.6A
• -230V AC: 3.2A

Dynamic Headroom (4Ω): 2.73 dB
Damping Factor (8Ω): 100
Απόκριση Συχνότητας (20 Hz-20 kHz): +0.7 dB, -0.8 dB
Αντίσταση εισόδου: 20 kΩ (balanced), 10 kΩ (unbalanced)
Maximum Input Level: +23.5 dBu

Συνδέσεις ανά κανάλι:

• 3-pin XLR θυληκο
• 1/4" TRS, balanced
  
  Υπάρχει επιπλεόν είσοδος USB type B, χρήση μόνο για την ενημέρωση του λογισμικού του ενισχυτή.
  

Έξοδοι ανά κανάλι :

• Speakon binding posts
• Speakon pinout: Channel A on 1+, 1-; Channel B on 2+, 2; Channel B on 1+, 1-

Προστασίες ενισχυτή και υπερφόρτωσης: short circuit, open circuit, υπερθέρμανσης, RF και DC faults.

'Ελεγχοι:

• 2 x Περιστρεφόμενοι encoders
• 3 x κουμπιά λειτουργίας (HOME, ENTER, EXIT)

Ενδείξεις:

• Power-On: Μπλε LED
• Σήμα: 2 x Πράσινο LED
• Clip: 2 x Κόκκινο LED

Λειτουργίες DSP:

• High-pass filter, 4th-order Linkwitz-Riley, adjustable frequency 20 Hz to 4 kHz
• Low-pass filter, 4th-order Linkwitz-Riley, adjustable frequency 60 Hz to 4 kHz
• 4-band parametric EQ with variable frequency, gain, and bandwidth
• Peak limiter with power, agressiveness, and impedance selection
• Delay 50 msec max.

• Διαστάσεις: 89 × 483 × 259 mm 2U
• Βάρος: 6 kg (net), 7.8 kg (shipping)

Power Output Level R-300 PLUS

STEREO
8ohm(T.H.D 0.05%)  170W+170W
4ohm(T.H.D 0.05%)  250W+250W

BRIDGED MONO
8ohm(T.H.D 0.05%)  460W
8ohm(T.H.D 0.5%)    500W

Frequency Response 20Hz- 20kHz, ±0.5dB

Convection Cooled

SoftStart Protection System

Balanced 10kΩ@0.775V Inputs

Dynacord H 5000

 
The power amp H5000 is part of Dynacord´s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with "floatingË switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications.  

 
Dynacord H 5000 features:

    2x 1500 Watt / 8 Ohm
    2x 2500 Watt / 4 Ohm
    2x 3500 Watt / 2 Ohm
    Cooling: Front-to-Rear, 5-stage-fans
    Dimensions (WxHxD): 483 x 88.1 x 498 mm
    Weight: 14.5 kg
    Protections:
    Audio limiters
    High temperature
    DC
    HF
    Short Circuit
    Back-EMF
    Peak current limiters
    Inrush current limiters
    Turn-on delay
    Mains Circuit Breaker Protection
    Mains Overvoltage Protection

The new Audio 3-stage CLASS-H SMPS amplifiers incorporate all the features to meet all your needs, whether youʼre starting a P.A. amplifier project from scratch or just need to upgrade your present sound reinforcement equipment. In the amps, youʼll find 2 and 4 channel models, all offering high power levels at low distortion in the range 1.5 to 6 kW, yet weighing around 8.6 kg and only 30 cm deep.

• Model Name: SP6K
• Output Power 1 kHz, 500
• Crosstalk (20 Hz - 20 kHz): > 75 dB
• Voltage Gain (selectable): 26 / 32 / 38 dB
• Input Sensitivity: 5.0 / 2.5 / 1.3 V
• Protection: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL (Inteligent Clip Limiting), PMS (Power Management System), SSP (SOA Sentry Protection)
• Controls: On / Off Switch, Volume, Voltage Gain, Dual / Link Switchable, Bridge Mode Configuration Switch
• Indicators: Signal, Temperature, ICL (Inteligent Clip Limiting), PMS (Power Management System)
• Connectors:
  • Input: 2 x XLR
  • Line Output: 2 x XLR
  • Speaker Output: 2 x Speakon
• Power Supply: 230 V - 50 Hz
• Dimensions (W x H x D): 483 × 88.9 × 310 mm

Business amplifier 2x2000W RMS @ 4 Ohms, 2x2500W RMS @ 2h, 2x1000W @ 100V, bridged (mono) 2400W RMS @ 4 ohms, 3600W / 100V. It has inputs 3-pin XLR, jack 6,3mm (balanced), output speakon and clamp. It also has settings panel dip switches 10 posts (clip limiter, filters, stereo / parallel inputs, bridge mode). Protections turn on / off muting, triac crowbar on each channel, stable performance regardless of load. 3U / 19 "rackmount. Dimensions (HxWxD) 133x483x400mm - 33,1kg.

 

Characteristics

Power (Stereo Mode):

    2x1050W @ 8Ohm (FTC 20Hz- 20kHz, 0,1% THD)
    2x1100W @ 8Ohm (EIA 1kHz, 0,1% THD)
    2x1600W @ 4Ohm (FTC 20Hz- 20kHz, 0,1% THD)
    2x2000W @ 4Ohm (EIA 1kHz, 1% THD)
    2x2500W @ 2Ohm (EIA 1kHz, 1% THD)
    2x2500W @ 70V (EIA 1kHz, 1% THD)
    2x1000W @ 100V (EIA 1kHz, 1% THD)

Power (Bridge Mode):

    3200W @ 8Ohm (FTC 20Hz- 20kHz, 0,1% THD)
    3600W @ 8Ohm (EIA 1kHz, 0,1% THD)
    5000W @ 4Ohm (EIA 1kHz, 1% THD)
    5000W @ 70V (EIA 1kHz, 1% THD)
    3600W @ 100V (EIA 1kHz, 1% THD)

Signal to Noise, 20Hz-20kHz, 8Ohms:> -100dB

Input sensitivity @ 8Ohms: 1,42V (+5,3 dBu)

Voltage Gain @ 8Ohms: 64x (36dB)

Output Circuitry: 3-tier Class H

Power requirements (230V)

    1/8 power pink noise at 4 ohms: 7A
    1/3 power pink noise at 4 ohms: 13,5A

Distortion (SMPTE-IM):