Content | HK AUDIO PREMIUM PRO 10 XD - ACTIVE 2way Speaker ΕΝΕΡΓΟ 10" 1200W Class-D
PREMIUM PR:O Manual 1.2
This truly multifunctional cab gets the job done nicely as a satellite, as a compact 10“/1" fullrange cabinet, or as a low-profile stage monitor. Its balanced frequency response defeats feedback and the Music/ Speech knob tunes the unit for the given application. The integrated DSP-based power circuitry delivers 1,200 watts. And all this makes the PR:O 10 XD a powerful and flexible sound reinforcement tool.
- Application options: As standalone fullrange speakers, in combination with PR:O 18 A and PR: O 210 A subwoofers, and as low-profile stage monitors
- 1,200 watt class-D bi-amped
- DSP for plug-n-play handling without complicated layered menus
- Integrated control over EQ, X-over, limiter and more functions
- Flat / Boost EQ presets
- Tone knob for quick Music / Speech voicing adjustments
- FIR X-over
- Custom-designed speakers
- 90° x 55° wide-beam CD horn for optimum sound
- Rugged, roadworthy housing tuned to deliver 131 dB SPL and punchy bass response
- Modular mix-n-match design for versatile use (fullrange, 2.1, half-stack and full-stack systems)
- M8 rigging points for easy installation
- Made in Germany
- 5-year warranty
Max SPL |
122 dB half space (@10% THD) |
Max SPL peak |
131 dB half space (@10% THD) |
Max SPL calculated |
133 dB half space |
Frequency response +/- 3 dB |
81 Hz – 16 kHz |
Frequency response -10 dB |
69 Hz – 18 kHz |
Power Rating |
1200 Watt |
Amplifier |
Class D - biamped |
Active protection circuits |
Peak and RMS Sound Limiter (separate for HF and LMF) |
Low/Mid Speaker |
1x 10“ |
HF Driver |
1“ |
HF horn |
90° x 55° CD horn |
Cut-off Frequency active |
2.5 kHz FIR X-Over with 48 dB/oct. |
Connections |
1x XLR–1/4“-Combo In, bal., 1x XLR-Through |
Equalizer |
Tone knob (Music / Speech) Bass Boost |
Angles up |
35° |
Pole mount |
DuoTilt 3/7 |
Rigging points |
3x M8 |
Handles |
1, integrated |
Enclosure |
MDF |
Grille |
Metal grille with black acoustic foam |
Finish |
Acrylic enamel, black |
Optional accessories |
Protective cover, Satellite Add-On M20, Adjustable pole M20 |
Dimensions (WxHxD) |
34 x 49 x 29 cm |
Weight |
13.2 kg / 29.1 lbs |
This remarkably versatile 10“/1" enclosure can serve as a satellite, a fullrange cabinet, and a low-profile wedge monitor. The Music/Speech knob adjusts its finely balanced and therefore feedback-resistant frequency response to suit the given application. All this and an onboard power amp make the PR:O 10 XA a very flexible sound reinforcement tool indeed.
Features
Application: Fullrange Cabinet / Stage monitor / Satellit
Output Power: 600 Watt
Speaker Output for Extension Cabinet
Mic and Line Input
Versatile High-class Tool
Title PREMIUM PR:O
Product Class Active Systems
Model PR:O 10 XA
Frequency response +/- 3 dB 89 Hz - 19 kHz
Frequency response -10 dB 67 Hz - 19 kHz
Maximum SPL, @ 10% THD 121 dB
Connections 1x XLR Combi Line In/Mic balanced,1x XLR Through balanced
LF Speaker 10"
HF Driver 1"
Horn characteristics 90° x 60° CD horn
Equalizer Tone control
Subsonic filter 35 Hz
Peak limiter yes
RMS-Soundlimiter yes
HF protection (passive) Dyn. protection circuit
Amplifier 600 W class D - 4 ohms
Parallel Speaker Out Min impedance 8 Ohm/300 Watt 1x Speakon
Pole mount DuoTilt 3/7
Rigging points 3x M8
Handles 1, integrated
Enclosure MDF
Grille metal grille with acoustic foam
Finish acrylic painture, black
Dimensions (WxHxD) 32 cm x 48 cm x 29 cm
Weight 13,9 kg / 30.6 lbs. |
Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.
Power for the active VENTIS models comes courtesy of a specially designed, Italian made switching mode amplifier module. Low frequencies are driven by a highly efficient 700W RMS (full bridge) Class-D topology, operating with extremely low THD. For the HF stage, a 200W RMS performance is delivered via a meticulously crafted Class-H / AB design.
Finally, DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with push-to-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.
- 2-way, bi-amplified, bass reflex design
- Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
- Digital Signal Processor with graphic display
- 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
- High efficiency switch mode power supply
- Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
- 250mm (10”) LF woofer with 50mm (2”) voice coil, custom made for FBT
- 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
- Frequency response from 58Hz to 20 kHz
- 80°H x 50°V Constant Directivity Rotatable Horn
- 6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8”) top-hat
- Speaker stand socket, one aluminium handle
- 45° monitor taper
Code: |
40640 |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
700/200 W RMS |
Built-in amplifier peak LF/HF: |
1400/400 W |
Frequency response: |
58Hz - 20KHz -6dB |
Low Frequency woofer: |
10 - 2 coil inch |
High Frequency driver: |
1 - 1.4 coil inch |
Maximum SPL cont/peak: |
124/131 dB |
Dispersion: |
80° x 50° rotatable HxV |
Input impedance: |
22 Kohm |
AC Power requirements: |
640 VA |
Input connector: |
XLR with loop, RCA ST |
Power cord: |
5/16.4 m/ft |
Net Dimension (WxHxD): |
329x575x325 / 12.95x22.63x12.79 mm/inch |
Net Weight: |
15.6/34.39 Kg/lb |
Transport Dimension (WxHxD): |
420x675x400 / 16.53x26.57x15.74 mm/inch |
Transport Weight: |
18.1/39.90 Kg/lb |
|
A versatile 12" powered speaker made from heavy duty polypropylene housing with a high power 12" woofer and 1.35" compression driver. Suitable for mobile DJ's, hire companies, installations, aerobics classes and as a monitor for solo singers and bands. A robust, well designed cabinet with a good punch and crystal clear high frequency response. Simple controls have been used on the rear, balanced mic input on XLR OR JACK, a balanced line input on XLR or unbalanced on RCA & a link output to similar or active subwoofers. A strong lifting handle to help mount onto a 35mm speaker pole and the option of a padded bag for extra protection that can be purchased separately.
SPECIFICATION
Power: 200 Watts RMS
Response: 45-20000Hz
Dimensions: 588 x 431 x 310mm
Weight: 17Kg
|
The DBR10 is the most compact model in its series and in its class. Capable of delivering a maximum SPL of 129dB from its compact enclosure, the DBR10 can be used as a utility speaker in a variety of environments. |
High-power 300-Watt 2-way PA sound reinforcement speaker system for live and playback applications. "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included). Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection. Additional Line output allows linking of additional speaker systems.
Brand | BEHRINGER | Model | B110D | Part Number | 000-ALX | Speaker Type | Active | Speaker Category | Satellite (full range), Floor Monitor | Construction Material | Plastic Cabin | Total Power (Watt) | 300 | Woofer (inches) | 10 | Tweeter / Driver (inches) | 1,35 | Frequency Response (Hz) | 45-20000 | Weight (kg) | 8,1 | Color | Black | Application | Portable PA | Series | EUROLIVE series | Warranty | 1 Year |
|
10’’ bi-active two way plastic speaker with Media Player
- Multimedia player: Usb Flash Drive, Sd Memory Card, STEREO Bluetooth Device, Remote Control
- Woofer 10’’ VC 1,5”
- Driver 1’’ VC 1”
- Line output XLR OUT + ¼” JACK OUT
- Line input XLR IN + 2 x RCA
- Mic input XLR IN + ¼” JACK IN
- Rms power AB class 120 + 30 W
- Peak power 300W
- Frequency response 55hz-20khz
- Peak spl 125 dB
- Power supply AC110V/AC230V
|
Reviews
There are no reviews yet.