| Content |
Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 15 X
Description The multi-talented prodigy in the PREMIUM PR:O family. The
Description housing shape enables the PR:O 15 X to be used as a main
Description PA or a monitor speaker.
Power handling capacity RMS: 400 W
Power handling capacity Program: 800 W
Frequency response within +/-3dB 60 Hz ? 19 kHz
Frequency response @ -10dB 53 Hz- 19 kHz
Speaker 1x 15?
Impedance 8 Ohm
HF driver 1?
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 128 dB
Crossover frequency 2 kHz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Rigging points side-mounted M8 threaded rigging points for easy installation
Dimensions (WxHxD) 47 cm x 61,5 cm x 44,5 cm
Dimensions (WxHxD) 18 1/2? x 24 1/4? x 17 1/2?
Weight 21.6 kg
Weight 47.52 lbs
|
Color Black
Input Connections Parallel Neutrik® NL4
Speaker Type Fullrange
Frequency Response (-3 dB) 70 - 20000 Hz
Frequency Response (-10 dB) 55 - 20000 Hz
Internal Crossover Yes
Recommended High-Pass Frequency 60 Hz
Sensitivity 1 W/1 m 99 dB
Max. SPL/1m (calc) 132 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
Rotatable Horn No
System Power Handling (Continuous/Program/Peak) 500 Watts
LF Transducer SMX2121
HF Transducer DH3
Crossover Frequency 1600 Hz
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 6.4 Ω
Enclosure Material Plywood and MDF with EVCOAT
Flying No
Height 440 mm (17.32“)
Width 364 mm (14.33“)
Depth 573 mm (22.56“)
Weight Net 19.8 kg (43.65 lbs) |
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 121 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 8" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
116 dB ( 100Hz - 12 kHz, fullspace @1m, 10% THD )
Max. SPL Peak (Sine burst)
121 dB ( fullspace @1m, 10% THD )
Frequency response (-3 dB)
68 Hz - 18000 Hz
Frequency response (-10 dB)
59 Hz - 20000 Hz
Crossover frequency
2500 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), 4 Application presets, Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
8 "
Woofer dimensions (mm)
203.2 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
Chassis Size 381 mm (15“)
Color Black
Directivity Index 11.6 dB
Input Connections 2 four-pin Speakon
Speaker Type Two-Way
Speaker Type Wedges
Speaker Type Fullrange
Frequency Response (-3 dB) 55 - 18000 Hz
Frequency Response (-10 dB) 46 - 20000 Hz
Internal Crossover No
Sensitivity 1 W/1 m 99 dB
Max. SPL/1m (calc) 133 dB
Coverage
(Nominal -6 dB) H° 55 °
Coverage
(Nominal -6 dB) V° 80 °
Rotatable Horn No
LF Transducer EVX155
Low Frequency Power Handling (Continuous/Program/Peak) 600 Watts
High Frequency Power Handling (Continuous/Program/Peak) 75 Watts
LF Nominal Impedance 8 Ω
HF Transducer ND6-16
HF Nominal Impedance 16 Ω
Minimum Impedance 7.2/14.3 Ω
Enclosure Material 13-ply birch plywood with Futura
Flying No
Outdoor No
Height 644 mm (25.35“)
Width 457 mm (17.99“)
Depth 340 mm (13.39“)
Weight Net 28.4 kg (62.61 lbs) |
Chassis Size 304.8 mm (12“)
Color Black
Directivity Index 11.6 dB
Input Connections 2 four-pin Speakon
Speaker Type Two-Way
Speaker Type Wedges
Frequency Response (-3 dB) 65 - 16000 Hz
Frequency Response (-10 dB) 50 - 20000 Hz
Internal Crossover No
Sensitivity 1 W/1 m 98 dB
Max. SPL/1m (calc) 129 dB
Coverage
(Nominal -6 dB) H° 55 °
Coverage
(Nominal -6 dB) V° 80 °
Rotatable Horn No
LF Transducer DL12ST
Low Frequency Power Handling (Continuous/Program/Peak) 300 Watts
High Frequency Power Handling (Continuous/Program/Peak) 75 Watts
LF Nominal Impedance 8 Ω
HF Transducer ND6-16
HF Nominal Impedance 16 Ω
Minimum Impedance 8.2/10.5 Ω
Enclosure Material 13-ply birch plywood with Futura
Flying No
Outdoor No
Height 584 mm (22.99“)
Width 449 mm (17.68“)
Depth 313 mm (12.32“)
Weight Net 21.9 kg (48.28 lbs) |
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 127 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 12" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
120 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
127 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
68 - 18000 HZ
Frequency response (-10 dB)
55 - 20000 Hz
Crossover frequency
1400 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
12 "
Woofer dimensions (mm)
304.8 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
Reviews
There are no reviews yet.