HK AUDIO PREMIUM PR:O 12 Passive Speaker 400 Watts

Electro-Voice TX1122 Tour-X 2-Way 12" PA Speaker
The Electro-Voice TX1122 is a high power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required in a lightweight package.

It utilizes the DH3, high output 1.25" titanium compression driver, coupled to a constant directivity 90 degree x 50 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications.

The SMX2120 12" woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.

It has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four-way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1122 to be suspended in a various positions. The recessed input panel with dual NL4 connectors keeps the connectors hidden, while allowing it to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• Freq. response (-3 dB): 60Hz - 20kHz
• Freq. range (-10 dB): 45Hz - 20kHz
• Rec. Hi-pass frequency: 45Hz
• Axial sensitivity: 97dB (1W/1m)
• Max. calculated SPL: 130dB
• Horizontal coverage: 90 degree
• Vertical coverage: 50 degree
• Power handling: 500W continuous, 2000W peak
• LF transducer: SMX2120, 12" (305mm) driver
• HF transducer: DH3, 1.25" (32mm) diaphragm compression driver
• Crossover frequency: 1750Hz
• Nominal impedance: 8 Ohms
• Minimum impedance: 5.4 Ohms
• Connectors: (2) Neutrik Speakon NL4\'s
• Enclosure material: plywood and MDF with EVCoat
• Grille: 16 GA steel, black powdercoat, with rotatable logo
• Suspension: (6) 3/8" threaded points - (2) on each side and (2) on the rear of enclosure
• Dimensions (H x W x D): 24.3" x 15.0" x 15.0" (616mm x 382mm x 380mm)
• Net weight: 44.5lbs (20.2 kg)
• Shipping weight: 50.0lbs (22.7 kg)

Electro-Voice ZX3-60B - 600-Watt, 12” two-way loudspeaker system, bi-amp or passive, 60 X 60 horn, integral stand mount, Neutrik Speakon, Black

This item is BLACK.

The Electro-Voice ZX3-60B is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil.
The ZX3-60B cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker.

• 2-way 600-watt suspension P.A. speaker with 60x60° coverage for long-throw and cluster applications
• High output, 131dB SPL capacity
• Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor
• 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil
• Rugged, high-tech polypropylene enclosure
• 3 suspension Anchor Plates, 10 M8 insert suspension points Additional Information on the ZX3-60B

The MI-112 is a 2-way passive full range loudspeaker that utilizes a 12? cone
low frequency transducer and a 1? throat compression driver with titanium
diaphragm. The multi-angle cabinet is constructed of Complex Aggregate Board
and finished with a hard-wearing black carpet. Two bar handles and a steel grille
sealed against corrosion using a polyamide powder coat finish are provided. A 35
mm tripod socket allows for stand mounting.
APPLICATIONS:
Intended for use in portable sound reinforcement and P.A.

FEATURES:
2-way vented loudspeaker system
1 x 12" speaker
1" compression driver with constant directivity horn
225 W power handling
Highly resistant CAB enclosure

SPECIFICATIONS:
RMS (Average) Power HandlingR: 225 W
Program Power HandlingP: 450 W
Peak Power HandlingK: 900 W
On-axis Frequency RangeF: 60 Hz - 16 kHz
Nominal Impedance: 8 Ω
On-axis Sensitivity 1W / 1 mS: 98 dB SPL
Rated Peak SPL at Full Power:128 dB
Nominal -6 dB BeamwidthsB: 90° Horizontal
(average, 500 Hz to 8 kHz) 75° Vertical
Speech Coverage AnglesC: 90° Horizontal x 80° Vertical
Enclosure Material:Complex Aggregate Board
Finish:Blue Gray carpet
Connector: 2 paralleled NL4 Speakon, wired
Dimensions (H x W x D): 59 x 43 x 35 cm / 26.5 x 19 x 15.4 in
Weight: 20.3 kg/ 45 lbs
Shipping Weight: 23.5 kg/ 52 lbs

12-inch Two-Way Passive 90 x 50, 600W Loudspeaker System

• DVX3121 12 LF Transducer with Forced Air Cooling ND2 2 Voice Coil, 1 Exit Neodymium Compression Driver 90 x 50 Coverage Pattern 600W Continuous (2400W Peak) Power Handling High Sensitivity, 131 dB Maximum SPL Adjustable Monitor Angle (45 or 55) 2 Anchor Plates for Single Stud Fittings and 7 Integral Suspension Points Available in Black or White Passive/Biamp Selectable Full Line of AccessoriesThe Electro-Voice Zx3 is the new standard of no compromise audioperformance and versatility in a simple to use, compact package.At its heart are the transducers. First is the DVX3121 high performancelow frequency transducer. EV used advanced computer aided designtechniques to create forced air, directional voice coil cooling for highpower and efficiency. Finite element analysis was used to optimize thesuspension and magnetic structure for long, linear travel to provide lowdistortion and greater LF extension. These features and details, suchas forged magnetic components and special materials, provide reliabilitywith a 500W power rating in a lightweight transducer. Next is theND2, a 2-inch voice coil compression driver based on neodymium motorstructure to allow for maximum output while reducing size and weight toa minimum. Its precision phasing plug and titanium diaphragm providebetter HF performance, while the integral heatsink provides cooling forhigh power output.The high tech enclosure uses injection-molded high-impact polypropylenestructural foam to make the Zx3 incredibly durable. The enclosuregeometry elements have been carefully designed to provide maximumrigidity and bass response. By design the Zx3 is also a perfect solutionfor stage monitors by allowing two angles (45 or 55) without any additionalaccessories.Two coverage patterns are available; 60 x 60 coverage for long-throwand cluster applications, 90 x 50 coverage for wider coverage or shorterdistances.The Zx3 is equipped with two anchor plates for rigging with single studfittings,along with two more possible anchor plate attachment points onthe bottom. For permanent suspension or attaching brackets, the Zx3also has two M8 inserts on the top and bottom, two under the handle,and one on the back of the enclosure, for a total of 7. All versions areavailable in black or white.
• Freq. Response1 (-3 dB): 58 Hz - 15 kHz
• Freq. Range1 (-10 dB): 48 Hz - 20 kHz
• Rec. Hipass Frequency: 50 Hz
• Axial Sensitivity1: 97 dB (1W/1m)
• Max. Calculated SPL: 131 dB
• Horizontal Coverage: 90
• Vertical Coverage: 50
• Power Handling (Passive): 600W Continuous, 2400W Peak
• LF Power Handling (Biamp): 500W Continuous, 2000W Peak
• HF Power Handling (Biamp): 40W Continuous, 160W Peak
• LF Transducer: DVX3121, 12 in (305mm) Driver
• HF Transducer: ND2, 1 in (25.4mm) exit Neodymium
• Compression Driver
• Crossover Frequency: 2 kHz
• Nominal Impedance: 8 Ohms
• Minimum Impedance: 6.2 Ohms
• Connectors: (2) Neutrik Speakon NL4s
• Enclosure Material: Polypropylene Structural Foam
• Suspension: Enclosure has locations for 4 Single-Stud
• Attachment Plates and 10 Forged Steel
• Eyebolts - 2 on Top, 2 on Bottom, 2 on
• Side, and 1 on Rear of Enclosure
• Grille: Polyester Powder Coated, 16GA
• Galvanized Steel, with Rotatable Logo
• Dimensions (H x W x D): 613mm x 397mm x 362mm: (24.14 x 15.64 x 14.26)
• Net Weight: 19.8 kg (43.7 lbs)
• Shipping Weight: 22.1 kg (48.6 lbs)

Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, λευκού χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg.