HK AUDIO PREMIUM PR:O 18 SUB A ACTIVE SUB 600W RMS

Boasting an 18' woofer in a bass reflex housing, this bin delivers a low-ranging bass foundation. The specially designed active stereo x-over routes the right frequency spectrum to the mid/ high unit connected via the Satellite
Out. The active PR:O 18 SUB A model also ships with a 600W RMS power amp and a port for active satellites.

• Application: Subwoofer
• Output Power: 600 Watt
• Built-in stereo X-over
• Very punchy High-power Subwoofer for Bands and DJʼs

The MILAN M18 is a self-powered bandpass subwoofer enclosure consisting of an 18" low frequency driver housed in an optimally tuned enclosure, together with an integrated lightweight 1kW Class D amplifier.

The amplifier provides two input channels with balanced jack/XLR connectors, and two link outputs on male XLRs, providing connections to further Milan mid-high cabinets or subwoofers. A filtered high-pass output also provides connections to other mid-high cabinets. The left and right signals are summed in the subwoofer through a low-pass filter to the 18" driver. A sub level control is provided in order to achieve an even level between the subwoofer and Milan mid-high cabinets. The M18 is available in two versions to suit regional AC mains voltages of either 110 volts or 230 volts, and mains power is supplied via an IEC mains connector.

The Class D amplifier features sophisticated signal processing which provides limiting functions to ensure high performance and long term reliability. Status LEDs indicate mains power, signal present and signal limit. The cabinet is constructed from 15mm laminated plywood and is finished in dark blue textured paint. A pole mount socket is fitted to allow Milan M15 cabinets to be mounted on optional 35mm speaker poles.

Full specifications
Net Weight     45kg (99lbs)
Dimensions     500mm x 700mm x 600mm (19.7" x 27.6" x 23.6“)
Components     1 x 18" (457mm) LF driver
Frequency Response     36Hz - 80Hz/125Hz ±3dB, 28Hz - 80Hz/125Hz ±10dB
Maximum SPL     125dB continuous, 131dB peak
Construction     18mm (3/4“) plywood enclosure finished in dark blue textured paint. Pole mount socket
Connectors     Input: (2) Jack/XLR female, wired pin 2 hot; Link: (2) XLR male, wired pin 2 hot;
Output: (2) XLR male, wired pin 2 hot; IEC mains connector
Flying Hardware     M10 rigging points on top and bottom
Spares & Accessories     LS-1816 18" (457mm) LF loudspeaker
RC-1816 Recone kit
M18AMP Amplifier module

The 18“, SRX818SP subwoofer features legendary JBL Drivers, proprietary 1,000 Watt Crown amplification, Crown Front-End DriveCore Technology, premium JBL user-configurable DSP, V5 Tunings compatible with Vertec and VTX touring systems, and HiQnet Network control options via iOS and Android applications. Drawing on JBLʼs long history of groundbreaking technology and loudspeaker design, the SRX800 Series meets the needs of touring houses, installations, and the most demanding live sound applications ensuring they can deploy a no-compromise, all-in-one solution featuring legendary JBL sound and performance, a wide array of configurability, and compatibility with JBLʼs flagship touring systems.

The DSR118W is a compact and high power active subwoofer system that extends the bass of the DSR full range speaker system to below 40Hz. With a high efficiency, low distortion 800W Class-D amplifier and a long travel, cast frame 18" woofer, the DSR118W achieves maximum peak SPL of 132dB. It also features a 35mm pole socket on the top, making it easy to set up a high performance sub/mid-high system.

• All-new 800W Class-D amplifier with PFC switching mode power supply
• Maximum SPL 132dB peak
• Extensive protection of the transducers, amplifiers and power supply
• Premium-grade, custom designed transducers
• Low-frequency extension down to 40Hz
• Compact and lightweight (42kg/ 93lbs)
• Bass-reflex, direct-radiating design
• Top panel pole mount for satelite configuration
• Heavy-duty 16-gauge (1.6mm) steel grille
• Locking IEC cable

SPECIFICATIONS    


Configuration     18" subwoofer
Transducer
    18" cone transducer
Frequency Response (-6 dB)     38 Hz - 124 Hz
Frequency Range (-10 dB)     34 Hz - 143 Hz
Maximum SPL1     135 dB peak
Amplifiers
Power Output2     1000 W Class D continuous
2000 W peak
Input Impedance (ohms)     XLR / ¼“: 38k balanced / 19k unbalanced
Controls     Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
Indicators     Power, Signal, Standby, Limit
Connectors     Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
Cooling     On demand, 50 mm variable speed fan
Amplifier Protection     Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection     Thermal limiting, excursion limiting
AC Power Input     Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power)     100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material     15 mm painted birch plywood
Finish     Black textured paint
Grille     Rugged Powder-Coated Steel Grille
Dimensions (HWD)     20.1" x 23.4" x 29.9" with casters
510 mm x 595 mm x 761 mm with casters
Weight (Net)     88 lb (40 kg)
Available Accessories     KW181 COVER


1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power.

2 Independent of limiters and driver protection circuits.

Features

    700 Watt digital amplification
    132 dB max spl
    18" High power woofer, 4" voice coil
    Xover selector, phase switch and high pass outputs
    Electronic equalization, soft limiter and protection
    Stereo Xlr/Jack combo input, Stereo Xlr signal output

Acoustical Specifications

    Frequency Response -3 dB: 40 Hz ÷ Xover point kHz
    Max SPL: 132 dB
    Woofer: 18“, 4" voice coil

Input/Output Section

    Input connectors: Combo stereo Jack-XLR male
    Output connectors: Combo stereo XLR female

Processor Section

    Crossover frequencies: 80 - 120 Hz
    Protections: Limiter
    Limiter: Fast limiter, rms limiter
    Controls: Volume, phase, crossover switches

Amplifier Specifications

    Total power: 1000 W

Cabinet

    Cabinet Material: Baltic Birch
    Handles: 2 on sides
    Pole Mount/Cap: yes
    Colour: Black

Physical Specifications

    Height: 650/25.5 mm/inch
    Width: 504/19.84 mm/inch
    Depth: 650/25.5 mm/inch
    Net Weight: 40.4/89.06 kg/lbs