EVE AUDIO SC204 ACTIVE Monitor 4” 2-WAY 100W RMS

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.

The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.

• 150W active studio monitor with 8" military-grade Kevlar low-frequency driver and 1.25" silk dome tweeter
• Bi-amplified design delivers a sound that's both powerful and precise
• Custom waveguide ensures accurate dispersion for an incredibly tight soundstage
• Optimized rear-mounted port produces defined low-end response with bass extension down to 37Hz
• Acoustic Space Control tailors your monitor to your mix space
• Volume control for dialing in the perfect playback level
• Balanced combo input allows for flexible installation
• Front-panel LED shines brightly when the speaker is positioned at an ideal angle

• Frequency Range: 37Hz – 22kHz
• Crossover: 2.0kHz
• Maximum Peak Input Level: -2dBU
• Input Types: Balanced 20kO XLR, and TRS
• Unbalanced: 10kO TS
• Input Sensitivity: -12dBU
• HF Driver Size: 31.8 mm (1.25“)
• LF Driver Size: 203 mm (8“)
• Amplifier Power: 150W Class A/B
• HF Driver Power Amp: 70W
• LF Driver Power Amp: 80W
• Port: Rear internally flared
• Controls: Yes
• Magnetic Shielding: Yes
• AC Input Voltage: 100–120V, 50/60 Hz 220–240V, 50/60 Hz
• Enclosure Construction: MDF
• Enclosure Finish: Black PVC
• Baffle Construction: Injection-molded ABS
• Baffle Finish: Matte black with Soft-touch
• Dimensions (HxWxD): 384 mm x 250mm x 302mm (15.1” x 9.8” x 11.9”)
• Weight: 10.5 kgs (23.1 lbs)
• Display Carton (HxWxD): 398mm x 345mm x 482mm (15.6” x 13.5” x 18.9”)
• Shipping Carton (HxWxD): 412mm x 359mm x 502mm (16.2” x 14” x 19.68”)
• Shipping Weight: 12.8kgs (28.22lbs)
• Configuration: 2-Way bi-amp
• System Type: Active Monitor
• Fuse Rating: 220–240V~ T1AL, 250V 100–120V~ T2AL, 250V
• Power Consumption: 150W
• Shape: Bass-reflex

Full Description

Compact and Ideal For Home Studio

Input Connections

Features

• Compact stereo speaker system ideally suited for home studios, multimedia applications, keyboard and vocal monitoring, etc.
• Powerful 4'' woofers and high-resolution tweeters powered by two 8 watt amplifiers
• Dedicated Volume, Bass and Treble controls for more flexibility
• Stereo RCA inputs for sound cards, keyboards, etc. that can be used simultaneously with a second stereo source (e. g. CD/MD player) through 1/8'' TRS stereo input
• Separately adjustable 1/4'' TRS microphone input mixable with stereo inputs for playback and vocal monitoring applications
• 1/8'' TRS headphone connector with auto-mute loudspeaker function
• Magnetically shielded for placement near computer monitors
• Designed and engineered in Germany

Specifications

• Woofer: 4''
• Tweeter: 1.5''
• Output Power: 2 x 8 Watts
• Frequency Response: 80Hz - 20kHz
• Speaker Impedance: 4?
• Input 1:
  • Connector: 1/8'' TRS Stereo
  • Input Level: -10dBm, 10k?
• Input 2:
  • Connector: RCA Stereo
  • Input Level: -10dBm, 10k?
• Mic Input:
  • Connector: 1/4'' TRS
  • Input Level: -50dBm, 50?
• Dimensions: 9.5'' x 5.5'' x 6'' / 241mm x 140mm x 150mm (H x W x D)
• Weight: 4kg