DAP AUDIO SPSEK039 Driver For Splash Series

22.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
DAP AUDIO SPSEK039 Driver For Splash Series The DAP Audio SPSEK039 Driver is a 1 “exit compression driver with neodymium magnet. This driver is used in the following speakers: DAP Audio Splash-12 (Splash12) DAP Audio Splash-12A (Splash12A) DAP Audio Splash-15 (Splash15) DAP Audio Splash-15A (Splash15A) Outer diameter: 65 mmDiameter flange: 34 mm (1 3/8″ mounting […]

 

Read more

DAP AUDIO SPSEK039 Driver For Splash Series

The DAP Audio SPSEK039 Driver is a 1 “exit compression driver with neodymium magnet. This driver is used in the following speakers:

  • DAP Audio Splash-12 (Splash12)
  • DAP Audio Splash-12A (Splash12A)
  • DAP Audio Splash-15 (Splash15)
  • DAP Audio Splash-15A (Splash15A)

Outer diameter: 65 mm
Diameter flange: 34 mm (1 3/8″ mounting )
Installation depth: 35 mm
IImpedance: 8 Ohm

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “DAP AUDIO SPSEK039 Driver For Splash Series”

Your email address will not be published. Required fields are marked *

Quick Comparison

DAP AUDIO SPSEK039 Driver For Splash Series removeB & C Speakers DE-400TN 100 W, 1” horn, Titanium diaphragm removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm removeJBL 2426 COMPRESSION DRIVER 1,5" 70W 16Ω removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers DE-85TN Driver 2", 110W, 107dB, 0.5-18kHz remove
NameDAP AUDIO SPSEK039 Driver For Splash Series removeB & C Speakers DE-400TN 100 W, 1” horn, Titanium diaphragm removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm removeJBL 2426 COMPRESSION DRIVER 1,5" 70W 16Ω removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers DE-85TN Driver 2", 110W, 107dB, 0.5-18kHz remove
Image
SKUSPSEK039DE-400TNDE-2002426JDE-45DE-85TN
Rating
Price22.00 incl. GR VAT 179.00 incl. GR VAT 124.00 incl. GR VAT 479.00 incl. GR VAT 136.15 incl. GR VAT 268.00 incl. GR VAT
Stock

In stock

Only 2 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockOnly 2 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

DAP AUDIO SPSEK039 Driver For Splash Series

The DAP Audio SPSEK039 Driver is a 1 "exit compression driver with neodymium magnet. This driver is used in the following speakers:

  • DAP Audio Splash-12 (Splash12)
  • DAP Audio Splash-12A (Splash12A)
  • DAP Audio Splash-15 (Splash15)
  • DAP Audio Splash-15A (Splash15A)

Outer diameter: 65 mm
Diameter flange: 34 mm (1 3/8" mounting )
Installation depth: 35 mm
IImpedance: 8 Ohm



DE400TN
100 W continuous program power capacity
1” horn throat diameter
44 mm (1.7 in) aluminium voice coil
Titanium diaphragm
1200 – 18000 Hz response
106 dB sensitivity
Compact Neodymium magnet assembly
Shorting copper cap for extended HF response
100 W continuous program power capacity
1” horn throat diameter
44 mm (1.7 in) aluminium voice coil
Titanium diaphragm
1000 – 18000 Hz response
106 dB sensitivity

70W AES compression driver, 1.75 διάφραγμα τιτανίου, 16Ω

The model 2426H is a professionalquality high frequency compressiondriver which incorporates JBL'stitanium diamond diaphragm. Thistitanium diamond structure combinesthe ruggedness of phenolic andcomposite-type diaphragms with theoutstanding frequency response offragile aluminum and exotic metaldiaphragms.

JBL's exclusive suspension, consistingof a three-dimensional diamondpattern, reduces bendingstresses in the diaphragm supportstructure. The depth of the diamondpattern is closely controlled toprovide predictable frequencies forthe 2nd and 3rd normal resonancemodes and for the basic suspensionresonance.

The mathematically determinedphasing plug consists of concentricexponential horns to minimize phasecancellations. Phasing plug, throat exittube and diaphragm assemblies areidentical to the previous model.

All cast parts and tolerances are held to the same levels traditionally associated with JBL designs. Additionally the press-fit assembly and interlocking parts assure greater resistance to the mechanical shock. Diaphragm assemblies are rim centered rather than pin mounted, for instant interchange ability and ease of field service.Mounting is provided for standard25 mm (1 in) three bolt pattern. The front snout may be removed(unscrewed) to allow standard 1 3/8" -18 screw mounting. Through holes for external attachment points are also provided. A machined ring of copper surrounds the pole piece to counteract the inductance of the voice coi1 at high frequencies. After manufacture, the frequency response of each driver is tested for conformity to rigid performance standards.

The 2426H is offered in an 8 ohm impedance, and the otherwise identical 2426J is offered in a 16 ohm impedance.

 

The 2426H features a removable flange to expose a 1 3/8“-18 snout for screw-on type horns.

Specifications:

  • Throat Diameter: 25 mm (1 in)

  • Nominal Impedance:2426H - 8 ohms2426J - 16 ohms

  • Minimum Impedance: 5 ohms (H), 9 ohms (J) @ 5 kHz

  • D.C. Resistance: 3.3 ohms (H), 6.5 ohms (J) +/- 10% @ 25C

  • Power Capacity:70 W continuous program above 800 Hz100 W continuous Program above 1.2 kHz

  • Sensitivity:107 dB SPL, 1 W @ 1 m, JBL 2344A horn110 dB SPL, 1 W @ 1 m, JBL 2370A horn117 dB SPL, 1 mW on plane wave tubes

  • Nominal Efficiency: 25% (800 Hz to 2.5 kHz)

  • Frequency Range: 500 Hz to 20 kHz

  • Recommended Crossover4: 800 Hz or higher, 12 dB/octave slope minimun

  • Diaphragm: 0.05 mm (0.002 in) pure titanium

  • Voice Coil Diameter: 44 mm (1% in)

  • Voice Coil Material: Edgewound aluminum ribbon

  • Flux Density: 1.8 T (18,000 gauss)

  • Bl Factor:6.3 N/A(H)9.3 N/A (J)

  • Positive voltage to black terminal gives diaphragm motion toward phasing plug

  • Mounting:Three 1/4-20 threaded holes, 120 apart on 57.2 mm

  • (2-1/4 in) diameterFront snout may be removed (unscrewed) to expose standard 1 3/8 in -18 screw threads
  • Dimensions: 149 mm (5 7/8 in) diameter, 104 mm (4 1/8 in) depth

  • Net Weight: 4.3 kg (9-1/2 lb)

1” high frequency compression driver, titanium
diaphragm, flat aluminium wire voice coil, low distortion,
extremely good response from 1.5 kHz. to 18 kHz.

Specifications1
Throat Diameter 25 mm. (1 in.)
Nominal Impedance 8 Ω
Minimum Impedance 7.6 Ω
Power Handling
(1500 –20000 Hz)
Nominal2 60 W
Continuous Program3 120 W
Sensitivity (1W/1m)4 106 dB
Frequency Range 1 – 18 kHz
Recommended Crossover5 1.5 kHz
Voice Coil Diameter 44 mm. (1.7 in.)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Titanium
Flux Density 1.7 T
Also available in 16 Ω, data upon request

Mounting and Shipping Informations
Two M6 holes 180° on 76 mm. (3 in.) diameter
Three M6 holes 120° on 57 mm. (2.2 in.) diameter
Overall Diameter 134 mm. (5.3 in.)
Depth 68 mm. (2.7 in.)
Net Weight (1 unit) 2.9 Kg. (6.4 lb.)
Shipping Weight (4 units) 12.5 Kg. (27.5 lb.)
Shipping Box (4 units) 300x160x180 mm.
(12x6.3x7.1 in.)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range . Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal
rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

220 W continuous program power capacity
2” horn throat diameter
75 mm (3 in) aluminium voice coil
Titanium diaphragm
500 – 18000 Hz response
107 dB sensitivity
Shorting copper cap for extended HF response
Weight0.10 kg5.00 kg2.00 kg4.50 kg2.00 kg4.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 5.00 kg
Weight 2.00 kg
Weight 4.50 kg
Weight 2.00 kg
Weight 4.50 kg