Content |
- DAP AUDIO Speaker Diaphragm
- Replacement for CX10
- Voice coil: 1.35" (34.4mm)
- Diameter: 63.0 mm
- Length: 83 mm
- Impedance: 8 ohm, DCR: 6.2 ohm
- Titanium dome
- Fits Driver and Cabinet Models: CX8, CX10, FANE CD130 / BEHRINGER ASP12, ASP15 / GEMINI GX1200
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
Model Number |
B40365 |
VC Diameter |
34.4 mm |
VC Bobbin Material |
KSV |
VC Wire |
CCAR/ALR/SV |
Diaphragm Material |
Titanium |
Tracery on Diaphragm Edge |
|
Diaphragm Out Diameter |
63 mm |
Diaphragm Height |
mm |
Diaphragm Thickness |
0.04 mm |
RDC |
6.2Ω |
Fit Wash Size |
|
Replacement |
|
FANE CD.130 and CD.131 Replacement Diaphragm
Replacement diaphragm for Fane\'s CD.130 and CD.131 compression drivers.
Voice coil diameter 34mm
Frame diameter 64mm
Width at widest point (across terminal lugs) 83mm
Distance between terminal post centres 72mm
Overall thickness of frame 4.5mm |
-
JBL Factory Speaker Diaphragm Part # D8R2418
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
This diaphragm is used in models 2404H, 2404H-1, and 2405. This diaphragm is also the correct replacement for the Peavey HT94!
Specifications:
8 ohm
DCR is 6.1 +or- 8%
Overall diaphragm diameter 2 15/16-in or 75mm
Voice coil diameter 1 3/4-in or 44mm
|
The JBL D16R2450 is the replacement HF diaphragm for the following JBL products:
- SR4731A
- SR4733A
- SR4731X
- SR4732X
- SR4733X
Note: If your speaker has an Ultra HF driver as well as a HF driver, the Ultra HF driver takes a different diaphgragm.
|
- Replacement diaphragm kit for 14XT™driver
for Impulse 100, TLS-2, TLS 2X, TLS-4, TLS-5, TLS 5X, TLM-2, TLM-5,Impulse 100P, Impulse 100 White, PR 10, PR 12, PR 15, SSE-10,SSE-12, SSE-15, SSE-6, SSE-26
-
Peavey 14XT Diaphragm Part # 00442500
-
Voice coil: 1-3/8" (35.5mm)
-
Diameter: 2-3/4" (70mm)
-
Impedance: 8 ohms, Re: 6.8 ohms
-
Titanium dome with edge wound voice coil on Kapton former
-
Fits Peavey Driver and Cabinet Models:
Peavey: 14A, 14-A, 14 A, 14XT, 14-XT, 14 XT, Impulse 100, TLS-2, TLS2, TLS 2X, TLS-4, TLS4, TLS-5, TLS 5X, TLS5X, TLM-2, TLM-5, Impulse 100P, Impulse 100 White, SSE-10, SSE-12, SSE-15, SSE-6, SSE-26, 00442510, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
| Replacement diaphragm kit for RX™22 driver
Impulse 1012 8 Ohm, Impulse 1012 4 Ohm, Impulse 1012P,Impulse 1015 8 Ohm, Impulse 1015 4 Ohm, DJS4, DJS 5, SP2X, SP3X,SP4X, SP5X, SP5XL, SP6X, SP112MX, SP115MX Impulse 1015P, QW 3, QW 3F, TLS 6X, SP2, SP3, SP4, SP5, SP6, SP12M, SP15M, SP 8
- Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
- NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
- Voice coil: 2" (50mm)
- Diameter: 4-1/2" (115mm)
- Impedance: 8 ohm
- Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
- Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Reviews
There are no reviews yet.