Content |
HK Audio IL 112 Sub Installation Line
An extremely compact, direct-loaded subwoofer, the IL 112 Sub delivers natural-sounding bottom end with remarkably low distortion levels. Particularly well-suited for supporting HK AUDIO IL 82 and IL 8.1 cabinets. Built-in Hi-cut filter.
| | | Accessories | | N/A
| | | Details | | The IL 112 Sub is a very compact subwoofer, which extends the frequency response of the loudspeakers IL 8.1 and IL 82 in the bass range. It is equipped with a direct loaded 12“-cone loudspeaker in a bass reflex housing and has a built-in passive crossover. The IL 112 Sub stands out through its powerful, low-distortion and thus natural bass reproduction with extremely compact dimensions. It is ideally suitable for acoustic applications in which the bass range of existing loudspeaker systems should be extended for distances of up to 10 m depending on sound pressure requirements. A controller is not required for operating the IL 112 Sub. It is however, possible to use the Digital Field Controller (DFC).
| | | Special features | | Housing Principle: Bass Reflex
| | | Power handling capacity | | RMS: | | 150 W | Program: | | 250 W | Peak (10 ms): | | 500 W | | | | Dimensions
(wide x tall x deep) | | 21-1/4" x 16-1/2" x 16-1/2“
54 cm x 42 cm x 42 cm
| | | Weight | | 50.6 lbs
23 kg | | | Service articles | | 12“-speaker E994091 |
|
The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all-electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible 'soft' power reduction.
Order-# D113129 Cabinet Subwoofer Configuration Vented Direct Radiator Nominal Impedance 8 ohms Rated Power RMS 700 watts Program Power 1400 watts Peak Power 2800 watts SPL 2,83 V/1m 98 dB max. SPL 1m (calc. with Peak) 132 dB Freq. Range (-10 dB) 35Hz - 700Hz Passive X-Over Frequency Hi-Cut VCT Protections yes Components LOW LFS 18700 Order-# D366304 Connectors SPEAKON 2x NL 4MPR 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensons (WxHxD) mm 505x 805x 570 Net Weight 49 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel
|
The TX1181 is the perfect companion sub to the TX1122 and TX1152 for compact and portable performance. Using the proven EVS18S woofer, the TX1181 effortlessly provides the low-frequency energy needed to keep up with Tour X boxes, as well as many other EV loudspeaker products. The integrated, low-pass input filter allows for single amp drive, and the high-sensitivity and excellent power handling don\'t require a large, expensive amplifier to generate high SPL. The TX1181\'s unique Backbone grille not only looks great, but also provides greater strength and damage resistance than simple grille block designs. Proprietary, ergonomically correct handles and angled input panels, and integrated, screw-in-style pole-mount make the TX1181 easy to transport and employ in a variety of applications.
Specifications
Frequency Response (-3dB) |
50 - 160 Hz |
Frequency Response (-10dB) |
45 - 700 Hz |
Recommended High-Pass Frequency |
30 Hz |
Sensitivity 1W/1m |
100 dB |
Max. SPL / 1m (calc) |
132 dB |
System Power Handling (continuous/program/peak) |
500/1000/2000 Watts |
LF Transducer |
EVS18S |
Nominal Impedance (Passive) |
8 Ohms |
Minimum Impedance |
7.5 Ohms |
Enclosure Material |
Plywood and MDF with EVCOAT |
Color |
Black |
Flying |
No |
Input Connections |
Parallel Neutrik® NL4 |
Internal Crossover |
Yes |
Speaker Type |
Subs |
Weight Net |
33.8 kg ( 74.52 lbs ) |
Dimensions (HxWxD) |
769 x 439 x 591 mm (30.28" x 17.28" x 23.27“) |
|
The new Yamaha CW218V features a super durable, paintable, elastomeric-sprayed coating with foam lined acoustically transparent steel grilles. Gives a great professional look much preferred over carpeted enclosures. Assembled by hand in the US by skilled technicians, each cabinet is designed for better low-end response and includes heavy steel handles and sturdy pole sockets to make moving and positioning easy.
The custom drivers from Eminence feature high-strength curvilinear cones and Kapton® voice coil formers, plus oxygen-free copper voice coils and oversize strontium ferrite magnets to provide high power handling and long life. 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex, and dissipate heat. The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection.
Connections are dual Neutrik Speakon® and 1/4" jacks. With professional features, excellent sonic performance, and great value, Club Concert Series loudspeakers deliver premium quality night after night. The CW218V reigns supreme with 2 cast-frame 18" woofers and 30Hz-2kHz frequency response (-10dB). It features 1,220W program handling with 2,400W peak. Sensitivity: 98dB. 48“W x 23“H x 26“D.
|
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01“)
|
The white Electro-Voice EVID-S12.1 is a 12” subwoofer designed to provide low-end reinforcement for system designers, installers, and audio engineers configuring systems for background and foreground music in stores, clubs, eateries, schools, and more. Its acoustic ports and 12” dual voice-coil, high-excursion woofer yield a frequency response of 40 to 140 Hz and a 127 dB maximum SPL.
Inputs and outputs utilize spring-loaded speaker terminals. The subwoofer can accept a stereo input and drive up to four satellite speakers (available separately). It includes hardware for mounting to a wall or corner and has an eyebolt for the attachment of a safety line.
12" dual voice-coil, high-excursion woofer and acoustic ports yield a frequency response of 40 to 140 Hz800W peak (200W continuous) power handling for 127 dB maximum SPL (133 dB peak)Spring-loaded speaker terminals for inputs and outputsSimultaneously drive up to four satellite speakers (available separately)Logo can be replaced to match speaker orientationIncludes hardware for mounting subwoofer to a wall or corner
LF Driver |
1 x 12" / 305 mm |
Input |
Spring-loaded speaker terminals |
Output |
Spring-loaded speaker terminals |
Frequency Response |
40 to 140 Hz (-10 dB) |
Sensitivity |
104 dB (eighth space on corner averaged 60 to 100 Hz, 1 W) |
Maximum SPL |
127 dB calculated, 133 dB peak |
Power Handling |
800 W peak (200 W with continuous pink noise for 100 hours) |
Low Impedance |
Yes |
Nominal Impedance |
8 Ohms |
Dimensions (H x W x D) |
16.3 x 23.0 x 11.9" / 413 x 584 x 303 mm |
Weight |
39.2 lb / 17.8 kg |
|
Reviews
There are no reviews yet.