MC2 Audio T3500 POWER AMPLIFIER 2×1850 watt 4ohm

Number of Channels: 2

Output Power: (per channel)

8 ohms     1000W
4 ohms  1850W
2 ohms  N/A


Output Power: (bridged)

8 ohms 3700W
4 ohms N/A


THD%: (@1dB below max output)

@ 1kHz 

Power Output Level R-150 PLUS

STEREO
8ohm(T.H.D 0.05%)  50W+50W
4ohm(T.H.D 0.05%)  75W+75W

BRIDGED MONO
8ohm(T.H.D 0.05%)  50W
8ohm(T.H.D 0.5%)  170W

Frequency Response 20Hz- 20kHz, ±0.5dB

Convection Cooled

SoftStart Protection System

Balanced 10kΩ@0.775V Inputs

Low weight switching final power amplifier. Power 2X2500W / 4Ω, 2Χ3000W / 2Ω. 5000W bridged 8Ω. New integrated BSS OMNIDRIVE 4bit / 192kHz processor with Cirus Logic SHARC A / D and D / A Converters. Level MAX peak voltage and RMS compressing, limiting. New hi-end FIR and IIR filters, 2sec delay / channel, as well as DSP presets for various speakers. LCD display on the front. USB port on the front for loading firmware and Speakers Tunning presets. Analog inputs with XLR, digital input AES / EBU, ethernet input RJ-45 with TCP / IQ protocol. Advanced 3rd generation power supply that allows the amplifier to operate at any voltage. Cooling circuit with microprocessor control with adjustable speed depending on the temperature. Analog and digital outputs (THRU) XLR. Exits speakon 5-way binding post, ground lift switch. Made of cast aluminum, height 2U rack. Suitable for P.A applications but also permanent installations. Weight 10.5kg

Stereo Mode Ratings (Both Channels Driven):

    8 ohms:
    - FTC 20 Hz - 20kHz, 0.1% THD: 1050W
    - EIA 1 kHz, 0.1% THD: 1100W
    4 ohms:
    - FTC 20 Hz - 20kHz, 0.1% THD: 1600W
    - EIA 1 kHz, 0.5% THD: 2000W (1% THD)
    2 ohms:
    - EIA 1 kHz, 1% THD: 2500W
    70V Direct Drive:
    - EIA 1 kHz, 1% THD: 2500W
    100V Direct Drive:
    - EIA 1 kHz, 1% THD: 1000W

Bridged Mono Mode Ratings/Specifications:

    8 ohms:
    - FTC 20 Hz - 20kHz, 0.1% THD: 3200W
    - EIA 1 kHz, 0.1% THD: 3600W
    4 ohms:
    - EIA 1 kHz, 1% THD: 5000W
    70V Direct Drive:
    - EIA 1 kHz, 1% THD: 5000W
    100V Direct Drive:
    - EIA 1 kHz, 1% THD: 3600W
    Signal to Noise, 20Hz-20kHz, 0.1% THD, 8 Ohms: > -100dB
    Input Sensitivity @ 8 Ohms: 1.42V (+5.3 dBu)
    Voltage Gain @ 8 Ohms: 64x (36 dB)
    Output Circuitry: 3-tier Class H
    Power Requirements (120V):
    - 1/8 power pink noise at 4 ohms: 13.9A
    - 1/3 power pink noise at 4 ohms: 26.9A
    Power Requirements (230V):
    - 1/8 power pink noise at 4 ohms: 7A
    - 1/3 power pink noise at 4 ohms: 13.5A
    Distortion (SMPTE-IM):

A full model revision takes Yamaha's high-end PC-N power amplifiers to the next level - the PC-1N
Series. The new PC-1N Series amplifiers feature an extraordinarily solid low end, rich midrange,
and superbly defined highs. They also deliver fast response and exceptional stability even in the face
of serious power supply limitations. Refinements throughout this expanded five-model lineup make
these amplifiers the new benchmarks for quality, reliability, and versatility in professional applications. Frequency Response: 10 Hz – 40 KHz. Ισχύς 2 x 1050 Watt / 8Ω RMS, 2 x 1650 Watt / 4Ω RMS, 3000 Watt / 8Ω bridge RMS. Weight: 13 κιλά.